Häfele DL7600 User manual
www.hafele.com
Model DL7600
Digital door lock
* The contents of this user manual are subject to change without prior notice
to the user in order to enhance performance of the products.
DL7600
User manual
1
Contents
Read before using How to use
Lock operation
Product features ...................................... 2
Warnings ................................................. 3
Product specifications ............................. 3
Factory default settings ............................4
Quick setup guide .................................... 4
How to open the door .........................12
How to open the door from inside ........12
How to lock the door ..........................13
Restore to factory setting ....................13
Micro USB emergency power supply...13
Reboot button......................................14
Replace batteries.................................14
Network module..................................14
How to change master PIN code ............. 5
How to add user PIN code ...................... 5
How to add fingerprint ............................. 5
How to add key card ............................... 6
How to delete user PIN code ................... 6
How to delete fingerprint .......................... 6
How to delete key card ............................ 7
Opening mode setting ............................. 7
Voice guide setting .................................. 7
Language setting ..................................... 8
System query serial number ..................... 8
Network module (Optionally available) ......8
Bluetooth setting.............................................. 9
Defense mode ......................................... 9
Auto/Manual mode .................................. 9
Privacy mode .......................................... 10
Safe handle switch .................................. 10
Mute/Voice switch (Temporary setting) .... 10
Menu table .............................................. 11
Auto lock / Auto re-lock function
When the door is closed, the lock will lock automatically (In case of auto locking mode).
Alarm for battery replacement time
When the power of battery is too low, a warning voice will appear.
Please replace all batteries immediately.
Prevent mischief and hacking
When entering 5 times a wrong user PIN code, key card and ngerprint, the lock is suspended
2 minutes. After that the lock will activate again. While the lock is suspended, the system will
alarm when you are trying to use keypad.
Burglary alarm function
When the door is opened by force, the lock is suspended with alarm.
When the privacy function is activated the door cannot be opened from outside with
user PIN code, key card or ngerprint except with master PIN code.
Privacy function
Random security coding function
The random number can be added before or after the real user PIN code but the maximum length
is 32 digits. This feature will prevent the real user PIN code from being exposed.
Defense mode
If someone break in and exit from inside, the lock will alarm.
5 way solution
Five electronic locking modes: master PIN code/user PIN code, key card, ngerprint, App and
emergency key.
5
Master PIN code/ User PIN code/ Key card/ and Fingerprint identication
1 master PIN code, up to 10 user PIN codes, 100 key cards, 100 ngerprints.
2
Product features
Read before using
Defense
mode
Warnings
Product specications
Read before using
* Read and understand all instructions before use.
* If damage is caused by failure to follow this instructions, the warranty does not apply.
* Only use the alkaline batteries.
* Do not expose the product and accessories to rain or water.
* Do not expose the product to corrosive substances to avoid damage to the protective cover.
* Do not scrape the fingerprint sensor with any sharp objects, otherwise it may cause permanent damage.
* When cleaning the product, please wipe with a soft cloth.
* If there is a low battery alert, please replace all the batteries in time and make sure they are properly installed.
1. You can follow the voice guide by multi-language (English/Chinese).
2. Master PIN code (6~12 digits): Default master PIN code is “12345678”, please modify it after installation.
3. User PIN code (6~12 digits): Maximum capacity is 10 with user number [00-09].
4. Fingerprint: Maximum capacity is 100 with user number [00-99].
5. Card: Maximum capacity is 100 with user number [00-99].
3
Inside panelOutside panel
Key cylinder
Emergency
power port
Reboot button
Touch keypad
Card reader area
Fingerprint sensor
CLOSE/OPEN
button
Reset button
Safe handle
switch
Battery cover
Bottom cover
Key cylinder
Emergency power port
Reboot button
Door handle
4
Factory default settings
Quick setup guide
Read before using
Master PIN code
Enter fingerprint
Star key, return to previous menu
User PIN code
Input number (00~99)Input number (00~09)
Enter card
Touch the screen to activate lock
Settings
Master PIN code*
Opening mode setting
*Important: First step is to set your own master PIN code.
Speaker
Wrong code entry limit
Shutdown time
Voice guide language
Factory defaults
12345678
Normal mode
Enabled
5 times
2 mins
English
5
Lock operation
Add/Change access data
How to change master PIN code
1. Before changing default master PIN code, all other setting menu will be disabled. You have to change master PIN code
first, then do other lock settings.
(first setting use
12345678)
(first time setting)
(6 –12 digits)
(6 –12 digits)
(6 –12 digits)
(6 –12 digits) (confirm)
(confirm)
How to add user PIN codes
1. When registering user PIN codes, the code must be entered within 10 seconds.
2. At any time you can return to the previous menu by pressing the “ *” key.
How to add ngerprints
1. When registering user fingerprint, the fingerprint must be entered within 10 seconds.
2. At any time you can return to the previous menu by pressing the “ *” key.
User Number User Type Notes
00-04 Normal User * Permanent
05-08 Temporary User * Invalid after using one time or in safety mode
09 Reserved * Only used in combination with network Module expansion
User Number User Type Notes
00-94 Normal User * Permanent
95-99 Reserved * Only used in combination with network Module expansion
Add/Change access data
6
Delete access data
Lock operation
How to delete user PIN code
Delete one user PIN code
(6 –12 digits)
Delete all user PIN code (Unusable in safe mode)
(6 –12 digits)
1. When deleting user PIN codes, the user number must be entered within 10 seconds.
2. At any time you can return to the previous menu by pressing the “*” key.
(6 –12 digits)
How to add key cards
1. When registering user card, the card must be entered within 10 seconds.
2. At any time you can return to the previous menu by pressing the “*” key.
Delete one user fingerprint
Delete all user fingerprints (Unusable in safe mode)
How to delete user fingerprint
(6 –12 digits)
(6 –12 digits)
Fingerprint
to be deleted
1. When deleting user fingerprint, the fingerprint or user number must be entered within 10 seconds.
2. At any time you can return to the previous menu by pressing the “*” key.
or
7
Delete access data
Lock operation
(6 –12 digits)
(6 –12 digits)
(6 –12 digits)
(6 –12 digits)
Voice guide setting
Turn on voice guide
Turn off voice guide (Excluding alarm and menu operation)
Opening mode setting
Normal mode: Single verification means opening by PIN code or fingerprint or card.
Safe mode: Double verification means opening by PIN code + fingerprint or PIN code
+ card or fingerprint + card.
Delete one key card
Delete all key cards (Unusable in safe mode)
How to delete key card
1. When deleting key card, the card or user number must be entered within 10 seconds.
2. At any time you can return to the previous menu by pressing the “*” key.
(6 –12 digits)
(6 –12 digits)
Key card
to be deleted or
(6 –12 digits)
8
Delete log-in data
Lock operation
Language setting
System query serial number
Additional lock features
(6 –12 digits)
Chinese English
or
Join network
Log off network
(6 –12 digits)
(6 –12 digits)
Network module (Optionally available)
Delete log-in dataAdditional lock features
Lock operation
9
Auto/Manual mode 1. Remove buttom cover to find the A/M switch.
2. [ A ] means auto mode: when door is closed, the deadbolt will
drive out automatically, the door will be in locked status.
3. [ M ] means manual mode: when door is closed, the deadbolt will
not drived out, then the door will be in unlocked status.
Defense mode
1. Enable: After door is locked, press [ ] button to enable defense
mode. Voice prompt “Outside forced lock enabled”. In this mode,
when the door is unlocked from inside, the alarm will be triggered.
2. Disable: Once the door is opened properly from outside, the
defense mode will be disabled.
Defense button
A/M switch
Bluetooth settings
Manage Bluetooth (under Bluetooth turned on)
Enable Bluetooth
(6 –12 digits)
(6 –12 digits)
or or
Connect Bluetooth Disconnect Bluetooth Disable Bluetooth
1. The default setting for Bluetooth is disabled.
2. Please enabling the Bluetooth first, before you manage Bluetooth. And please keep it is turned on, when you use it.
In manual mode, when the door is closed, please verify user fingerprint/Pin code/card to lock the
door from outside or press the [CLOSE] button on the back panel to lock from inside
Other manuals for DL7600
1
Table of contents
Other Häfele Door Lock manuals
Häfele
Häfele 911.52.122 User manual
Häfele
Häfele EL6500-TCS User manual
Häfele
Häfele ER4900 User manual
Häfele
Häfele EL10K Troubleshooting guide
Häfele
Häfele StealthLock 237.56.350 User manual
Häfele
Häfele PP8100 User manual
Häfele
Häfele 231.07.070 User manual
Häfele
Häfele miniLock User manual
Häfele
Häfele EFL 30 User manual
Häfele
Häfele 7100 User manual
