GZAIR Grow PT02 User manual
1
1. Alarm Indicator
2. Light sensor
3. Wi-Fi Indicator
4. Temperature Zone
5. Humidity Signal output Icon
6. Temp Signal output Icon
7. CO2 Signal output Icon
8. Buzzer Bit
9. Temp & Humidity Sensor
10. RS-485 signal port/Electric relays
11. Mounting Holes
12. CO2 NDIR Dual Channel Sensor
13. Signal Output Power Line
14. Charging Port
2
PRODUCT PARAMETER
Product Name:
Smart Agri Controller
Model No.
GrowPT02
Color:
White
Temperature Measurement Range:
-20°C ~ 60°C; ±2 °C
Humidity Measurement Range:
5% ~ 95%RH; ±5%RH
Co2 Measurement Range:
0 ~ 10,000ppm
Co2 Accuracy:
±50ppm with ±5% of readings
Co2 Resolution:
1ppm
Working Temperature:
0 ° - 50 °C
Working humidity:
0-95% (non-condensing)
Input Voltage:
DC 12V/2A
Product Weight
1120g (Include package)
Product Size:
180mm(L) * 39mm(W) * 119mm(H)
Single Output power line:
RS485/Relays for CO2, Humidity, Temperature,
3
GrowPT02 Power Diagram:
1. Power socket to control the power on and off for the devices of
Dehumidifier, CO2 generator, A/C or Fans and Main power.
Power supply: 110-240V, 50/60HZ, Max,5A, Max watt 1200W.
2. Power adaptor for CO2 controller, power supply: 12V/2A.
3. Power plug for the socket: 110-240V, Max ,5A.
4. Socket’s power line with relay signals output to connect CO2
controller
PRODUCT OPERATION
1. Power Device on or Off: Long-press the Power button to switch on/off the device.
2. Switch the temperature display between Fahrenheit and Celsius:
To change the temperature displayed to read Celsius instead of Fahrenheit (or Fahrenheit to Celsius):
I. Long press the Power button to switch it on.
II. Rapidly press the Power button two times in a row.
4
3. Alarm Silence/Mute/Unmute function: When any of the following indexes (CO2, Temp and
Humidity) reaches the Alarm Threshold value, the unit alarm will be sounding for ten seconds and the
corresponding working signals will be output, while the alarm icon keeps blinking until the values are
down to the Alarm-shutdown Threshold. (The default alarm time is 10 seconds. You can reset it on
APP.)
Or you can choose to
I. Press the Power button one time in a row to silence the alarm.
II. Long Press the 'ESC' button to mute the alarm. And the alarm logo will be disappeared on the
screen.
III. Long Press the 'ESC' button to unmute the alarm. And the alarm indicator will be displayed on the
screen.
5. Backlight adjustment:
I. Press the 'Set' button one time in a row for dark mode.
II. Press the 'Set' button one more time for turning off the backlight.
III. Press the 'Set' button one more time for turning on the backlight.
Or The backlight will be auto closed when the daylight sensor detects lux between 0.001—00.3.
6. Factory reset: Rapidly press the 'ESC' button five times in a row to resume the factory setting
1) The default CO2 Alarm Threshold is 1400ppm, and the Alarm-shutdown Threshold is 1600ppm.
The CO2 alarm setting range is 0 – 10,000ppm.
2) The default De-humifying Alarm Threshold is 50%, and the Alarm-shutdown Threshold is 45%.
The Humidity alarm setting range is 10%-85%.
3) The default Temperature Alarm Threshold is 29℃ (84℉), and the Alarm-shutdown Threshold is
27℃ (81℉). The Temperature alarm setting range is 1℃ (34℉) - 50℃ (122℉).
7. How to set the threshold values of CO2/Temp//Humidity in the device:
5
A. The icon stands for Alarm Threshold. The icon stands for Alarm-shutdown Threshold.
I. If the real-time value is above the alarm threshold value, the alarm will sound. The and alarm
icon will blink on the screen.
II. If the real-time value is below the alarm-shutdown threshold value, the alarm icon stops blinking.
And the will flash for ten seconds.
B. How to set the Threshold values on the GrowPT02 screen panel:
I. Long press the 'SET' button to enter the setting interface.
II. Press the ' △ ' button to increase the Threshold values and press the ' ▽ ' button to decrease the
Threshold values.
III. Press the Power button one time to switch the setting between the and in the same
section.
IV. Press the 'SET' button one time to move to the next section for setting.
V. Press the 'ESC' button one time to quit the setting without saving.
VI. Long press the 'SET' button to save the setting and quit.
Areas of Application:
Grow Tent/ Greenhouse/ Farmland
6
NOTE
1. Do not place the monitor in an extreme environment such as high temperature or low
temperature. This product does not protect against thunder, lightning, and rain. Make it used in a
normal indoor environment.
2. Knocking, impacting, or disassembling the product may cause the detection to be inaccurate.
Please keep the unit properly.
3. To wire RS485/Relays signal output, please find professionals to make the wiring connection
with the guidance of the instruction book (please check it in the packaging box). Please be careful
about the danger of electricity during wiring connection.
4. For the IoT solution between the GrowPT02 and other Smart devices such as fans, humidifiers,
and Co2 generators, etc., please find the instruction book in the packaging box.
WARNING
1. Please keep the product unreachable for children and babies.
2. Please don't dismantle, modify, heating the product.
3. Avoid falling or heavy hitting.
4. Do not touch any part of the product with wet hands.
5. Do not allow the metal objects (like pins, keys) to contact terminals or plugs.
6. Do not cut, damage, or modify the power cord.
How to connect with Wi-Fi Tuya App?
Download “Smart Tuya” or “Smart life” from your app store
Device Operation
Long press the Power button. When the GrowPT02 device is powered On, the Wi-Fi
function will automatically turn on (The Wi-Fi icon starts blinking). At this time, you can
open the Tuya app to connect.
If there is no connection within two minutes, Wi-Fi will automatically shut down.
Rapidly press the Power button three times in a row, Wi-Fi will turn on, and you can try to
connect. Rapidly press the Power button three times again, Wi-Fi will turn off.
If you want to connect to another phone or reset the connection, just reset the device by
switching on the GrowPT02 and rapidly pressing the power button five times in a row to
wait for 5-10 seconds until the Wi-Fi icon flashes to start the new connection process.
7
Remark: Wi-Fi router must be 2.4GHz
Phone Operation ( GrowPT02 controller connection)
If open your mobile phone Bluetooth and Wi-Fi (2.4GHz), the device can automotive searched by
Bluetooth. ---Put Wi-Fi name and Password – add device ---Finish
8
9
10
What’s the difference between “Create a Home” and “Share device”?
1. The "Create a Home" means creating a Home in the App first. You can add multiple devices and
members to the Home. The members in your Home can see all the devices. And any new devices
added to your Home will automatically be shared with all Home Members. For example, the
homeowner added an Air Quality Monitor in the Home at first. The other members can see it. Then
the homeowner added a Smart Plug in the Home later, the other members can see it also.
2. About the "Share Device": you should add the device to the APP first. Then you go into the device
information interface, and tap "Share Device “to share it with other users. If you added another
device to the App, and you want to share it with other users. You should repeat the sharing steps.
Other GZAIR Controllers manuals
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
