Grundig MDI907 User manual
Infrared
Thermometer
AInstruction Manual
Customer Model:MDI907 Factory Model:MDI903
Tip: A wrong operation can cause a inaccurate
measurement result, the correct measured distance
is 1-5 cm to forehead (between the eyebrows).
July 2020 VER.1.0
©copyright Edco Deutschland GmbH
Siemensstr. 31 47533 Kleve
Deutschland. Made in P.R.C.
www.grundigaccessories.com
®The Grundig trademark is used
under license
0123
2
Table of Contents
Introduction 2
Safety Information 3
Product structure 6
Battery installation 7
Setting 8
Use of the unit 9
Trouble shoot 12
Care and maintenance 13
Specication 14
Warranty information 15
3
Introduction
▲Yournewnon-contactforeheadthermometerusesadvanced
infrared (IR) technology to measure temperature instantly and
accurately on the forehead or object.
▲Easytouseandlessmeasurementtime.Thisthermometerdoes
not need to contact body or object to ensure the safety and hygiene.
Itsergonomicdesignmakesthisthermometerbesimpleandvery
easy to check the temperature. It only takes 1 second to take
measurement and reading.
▲Bodyandobjectmodes
This thermometer supports to measure temperature of body and
object. Measuring range of object mode is 0.0 to 100.0 °C(32.0
°F~212.0 °F).That mean s except to take body temperature, it also
supports to take the surface temperature of object as below,
.Surface temperature of milk in the bottle
.Surface temperature of baby bath
.Environmenttemperature
▲Alarmsoundswhenbodytemperatureisover38.5°C,analarm
sounds for 3 times.
▲Memoryfunction
It stores up to 1 sets recent measurement data.
▲Autopoweroff
Automatically power off if left idle for 30 seconds .
▲Measurement
Measurementtimeintervalin15sandthemeasurementdistanceis
within 1-5 cm.
Please read the manual carefully before you use the unit, and keep
for future reference.
4
Safety Information
This thermometer is not intended to
substitute for a consultation with your
physician.The forehead scan temperature
servesasareferenceonly.Itcannotbea
judgmentonfever.
Basic safety precautions should always
be
observed,especiallywhenthethermometer
is used on or near children and disabled
persons.
Pleaseplacethedeviceunreachableby
young.
Avoiddirectsunlight.
Do not touch the lens.
Nomodicationofthisdeviceisallowed.
The swallowing of small parks like
packingbag,battery,batterycoverandso
on may cause the suffocation.
Please do not use a dilution agent,
alcohol or petrol to clean the unit. Please
treatisgentlyandpreventthefallingfroma
high place.
Please do not immersed it in liquid.
Neverleavebatteryinthebattery
compartment fora long time without use,
as they may leak and cause damage to the
unit.
5
Please take off the battery if you do not
intend to use within 3 months. Replace
with new batteries if the unit display a low
battery symbol.
Do not mix the old and new batteries
together.
This article is not for professional usage.
6
Safety Information
▲Toensurethecorrectuseoftheproduct,basicsafetymeasures
should always be followed including the warning and the caution
symbols listed in the instruction manual :
Symbol descriptions
The following symbols may appear in this manual, on the label,
onthedevice,oronitsaccessories.Someofthesymbols
representstandardsandcomplianceassociatedwiththedevice
and its use.
WARNING:Thisalertidentieshazardsthatmaycause
serious personal injury or death .
CAUTION:Thisalertidentieshazardsthatmaycause
minor personal injury, product damage, or property
damage .
Type BF applied part
Manufacturer
Speciesserialnumbe
DISPOSAL : Do not dispose this product as unsorted
municipal waste. Collection of such wast e separately for
special treatment is necessary.
Direct current
Operating instructions
Consult accompanying documents
7
Safety Information
WARNING :
Do not dispose of electrical appliances as unsorted municipal waste,
useseparatecollectionfacilities.Contactyoulocalgovernmentfor
informationregardingthecollectionsystemsavailable.Ifelectrical
appliancesaredisposedofinlandllsordumps,hazardous
substances can leak into the groundwater and get into the food chain,
damaging your health and well-being.
Classication
1.Internally powered equipment;
2.Type BF applied part;
3.Protection against ingress of water: IPX0;
4.NotcategoryAP/APGequipment;
5.Mode of operation : Continuous operation ;
Note : the user must check that the equipment functions safely and
ensure that it is in proper working condition before it being used.
8
Product structure
Body
1. Display screen
2. Mode switch
3. Sensor probe
4. Down (-) button
5. Up (+) button
6. Setting button
7. START/STOPbutton
8. Batterycover
Display
1. Object temperature indicator
2. Body temperature indicator
3. Temperature unit
4. Memory mode
5. Low battery indicator
6. Sound indicator
7. Temperature reading
1
2
3
4
5
6
7
8
7
9
Battery Installation
1. Removethebatterycoverfromthe
battery compartment as the arrow
direction accordingly.
2. Insert2pcs1.5VAAAsizealkaline
batteries, and ensure each battery is in
the proper direction.Close the battery
cover.
Low battery and replacement
During power on, the low battery symbol will display
once the unit starts to work, and you should replace with new
batteries, otherwise the unit can not work.
Battery type and replacement
Please use 2 pcs of AAA identical 1.5V alkaline batteries. Do not use
the batteries beyond their expiry date .
Pleaseremovethebatteriesifyoudonotneedtouseforlongtime.
WARNING
Dispose the battery in accordance with all federal, state and
locallaws.Toavoidreandexplosionhazard,donotburnor
incinerate the battery.
10
Setting
How to set
Display Function Description
F-1 Unit selection Toggle between Unit
°C and °F
F-2 TurnOn/Offthe
alarm sound
With“OPEN” on the
screen means the
sound is on With
“CLOS” on the
screen means the
sound is off
This manual suits for next models
1
Table of contents
Languages:
Other Grundig Thermometer manuals
