v
The rated voltage for this printer is AC 200 - 240 V. Use an appropri-
ate power source and voltage for the specications of this printer.
●
Using this printer with a power source and voltage which are not compatible
with the specications may result in a re or an electric shock.
●
The operating conditions of this printer are as follows. Use a power source
which meets these conditions.
Power source and voltage: AC 200 - 240 V
Power supply frequency: 50/60Hz
When disconnecting the power cable, be sure to hold on to the plug,
and not pull on the cable itself.
●
Pulling on the cable will expose the core wires, or cause damage such as
broken wires. Current leakage from the exposed or damaged areas may result
in a re hazard or electric shock.
As a general rule, do not use an extension cord.
●
Use of an extension cord may result in a re hazard or electric shock. If you
must use an extension cord, unbundle it, and make sure that the power plug is
rmly inserted into the extension cord socket.
Make sure that the power plug can be readily unplugged at any time,
and that there are no objects placed in its vicinity.
● Objects placed in the vicinity of the power plug will prevent its removal in an
emergency.
Be sure to ground the earth terminal.
●
Electric leaks which occur when no grounding wire is connected may lead to
res or electric shocks.
●
Be sure to have a ground connection.
●
Be sure to have a ground connection before connecting a power plug to a
power source. Be sure to remove a ground connection after disconnecting a
power plug from a power source.
