Grandview LF-PHxx(DY) User manual

Installation Guide for

Large-Flat series Prestige Concave Permanent Cinema Screen

Model：LF-PHxx(DY)

GRANDVIEW REPRODUCING GENUINE COLORS

ISO9001:2000

International Certification

Thank you for purchasing a Grandview projection screen.

Before use, please read instructions carefully. After installation, store instructions for future reference.

Grandview Crystal Screen Canada Ltd.

#11- 3751 North Fraser Way,

Marine Way Business Centre,

Burnaby, BC, Canada V5J 5G4

Tel: 1-604-412-9777 Fax: 1-604-412-9796

Website: www.grandviewscreen.ca

Guangzhou Grandview Crystal Screen Co., Ltd.

P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,

Shiqiao, Panyu District, Guangzhou, Guangdong, China

Tel: +8620-8489-9499 Fax: +8620-8480-3343

Website: www.grandviewscreen.com

www.grandviewscreen.com.cn

Concave frame bars ( 2pcs ) M8 x 30 mm corner connector screws ( 4pcs )

Description

Illustration

Front view Back view Side view

Planform

Side frame

concave frame

Connecter piece

Fabric

Screen parts

Accessaries

Top and bottom installation bars( 1set ) Bracket ( 4pcs )Side frame bars ( 2pcs )

5 x 10 mm screws ( 8pcs )

5 x 40 mm tapping screw with anchor ( 6sets )

Security screw ( 2pcs )

M8 spanner ( 1pc )

Instruction manual ( 1pc )

PVC strip

(long/2pcs、short/2pcs )

Ignoring the safety warnings may

lead to injuries and/ or damaging

the product.

Fixtures should be installed in a secure

place to avoid accidents or the screen

falling.

Please contact your local dealer for

repairs or maintenance. Please contact

our company if you have any further

questions. Avoid taking apart the

fixtures yourself. Loose parts may

cause the screen to fall.

Do not take apart and replace with unknown parts. If there are any problems, please contact your local dealer. Product

specifications are subject to change.

When installing, make sure it is facing forward. The back of the screen will be labeled with a sticker.

Please read the following as any damage to the screen surface will affect the quality of the picture:

1.The frame is made with lightweight aluminum. Please handle with care.

2.Avoid contact or touching the screen surface as it may cause scratches or tears.

3.Do not write or draw on the surface.

4.Clean the screen with a soft cloth and lukewarm water. Do not use any detergent or cleaning products.

5.Use a cotton cloth to carefully wipe off the dust on the frame to prevent any damages

6.If it is not in use for a long period of time, cover the screen to shut out dust and dirt.

To prevent unnecessary damage, the operating and maintenance of the screen should be done by adults.

Opening the case, the frame has indentations on surface because of packaging in a dry case for a long

time. This is a normal phenomenon and the screen can be used normally. Please stay the screen in a

normal condition that the indentations can be naturally removed. Recovery time will be changed in 1-15

days because of the air humidity, If you want to remove these indentations quickly, please use half-wet

solution.

Methods: Sprinkle water on the surface that can remove the indentations.

Warning

Installation

1. Lay the two side bars and two concave bars on a horizontal ground, building the shape of a rectangle. ( Figure 1 )

Figure 1

Concave frame

Side frame

3. Fasten the M 8 x 30 mm corner connector screws to the corner connector screw holes. ( Figure 4-6 ). Do the same

for the rest three corner pieces.

2. Conect the axis of the corner piece of the concave frame bar to the side bar's location hole. ( Figure 2-3 )

Concave frame

Side frame

Concave frame

Side frame

Axis of the corner piece

Location hole

Figure 2 Figure 3

Figure 4 Figure 5 Figure 6

Corner piece screw hole

Corner piece

M8 x 30 mm corner

connector screws

W (mm) L (mm) H (mm) A (mm)

60 "

7 2"

8 0"

100"

4:3

120 "

150"

LF-PH60

C C

35mm

80mm

1381

1625

1788

2194

2600

3210

LF-PH72

LF-PH80

LF-PH100

LF-PH120

LF-PH150

1076

1259

1381

1686

1991

2448

1219

1463

1626

2032

2438

3048

914

1097

1219

1524

1829

2286

16:9 77 "

80 "

92 "

100 "

106 "

1 12"

120"

150"

LF-PH77

LF-PH80

LF-PH92

LF-PH100

LF-PH106

LF-PH112

LF-PH120

LF-PH150

1704

1771

2037

2214

2346

2479

2656

3320

958

996

1145

1245

1319

1394

1494

1867

1868

1935

2201

2378

2510

2643

2820

3484

1120

1158

1307

1407

1481

1556

1656

2029

490

523

581

670

660

727

740

922

Specifications

Net weight

(kg)

Format Model Specification

(In)

Bracket margin

C (mm)

Viewing area Screen dimension

Note: Sizes and specifications are subject to change at any time. Refer to real product for exact data. The tolerance

for L is ± 5mm.

Frame section view

Side view

Front view

360

480

490

620

730

900

7.3

8.8

9.5

12.2

13.2

18.5

9.4

9.8

11.3

12.2

12.7

13.5

14.2

17.8

3. Ef f e ct Clart

2. Push down PVC stripe along the frame slot,lock down PVC stripe with slot tightly.

Note:

A. PVC stripe has directivity, the side has V slot or arrow direction must face the view area,

as per below diagram.

B. When push down the stripe, press the long side tightly first(press from the middle to the end),

and strain the fabric at the other end,then press the other long side down tightly.

C. The press the short side stripe down tightly by the same way.

D. When finish, if there is wrinkles in the view area, the user can loosen PVC strip and make the

necessary adjustment accordingly.

Installation

below instruction and lay on the frame, and moving the fabric to ensure it is located in the centre

of the frame. (note: When fabric facade face downward,please be careful not to scratch it.)

Turn over frame with its back upward, set it on clean desktop or ground, expand fabric per

Push down

PVC strip

Fabric

Frame

Push down and lock tightly

Frame

Fabric

inside of screen

(view area) inside of screen

(view area)

V slot

arrow direction

V slot or arrow direction

must face the inside of

screen(view area)

The user can loosen PVC strip along the outside direction of

screen and adjust the flatness of fabric accordingly.

5. When the screen is installed on the installation bars, adjust the orientation of the screen to make sure the hole in the

bracket is aimed at the fixed slot in the bottom installation bar. Fasten the security screw to the hole and fix the screen.

( Figure 16-17 )

4. 14-15 )Fasten the concave bar brackets to the on-wall top and down installation bar slots. ( Figure

Figure 14 Figure 15

Fixed slot

Bracket

Bottom

installation bar

Security screw

Concave frame

Bottom

installation bar

Security screw

Bracket

Concave frame

Figure 16 Figure 17

Figure 7

Concave frame

Back side fabric

Side frame

Screen Installation

1. Each screen is equipped with 4 brackets labelled 1,2,3,4; and thus the concave frame has relevant marks of 1, 2, 3, 4.

# #

When installing the brackets, use the 5 x10mm screws to fix the bracket 1 to mark 1 on the concave frame. Do the

# # #

same for bracket 2 , 3 and 4 . ( Figure 8 ). Make sure the screws are tightly fastened.

Figure 8

120 32 23 20

4:3

16:9

Lt (mm)

60" 72" 77" 80"

850 850 1000

Lt (mm) 1000 1000

92" 100" 106" 112" 120"

1150 1300

1150 1150 1300 1300 1450

150"

1600

1750

2. Each screen is equipped with a top and bottom installation bars with many sets of holes, three of which belonging to

one set. Installation bar specifications on Figure 9.

Top installation bar

Bottom installation bar

Measure unit: mm

Side view

Front view

Side view

Figure 9

Table2: Length of installation bars ( Lt )

Specification (in)

Format

Note: Sizes and specifications are subject to change at any time. Refer to real product for exact data.

3. The top and bottom installation bars have been linked in factory and the length in between is pre-set. Fix the top

installation bar at horizontal level and the bottom bar will go parallel as a result of gravity. Make sure the length in

between is conform to the table 2 .Micro adjustment is allowed. Then fix the bottom installation bar. You can also

refer to table 3 for the required distance between the installation bars. ( Figure 10-11 )

60" 72" 77" 80" 92" 100" 106" 112" 120"

Note: Sizes and specifications are subject to change at any time. Refer to real product for exact data.

1063 1101 1250 1350 1424 1499 1599

1019 1202 1324 1629 1934

150"

1972

2391

Figure 10 Figure 11

top installation bar

Bottom installation bar

Link Distance between

installation bars

Table 3: Distance between installation bars

Specification (in)

Format

4:3

16:9

Distance (mm)

Installation details:

a. Woody wall installation: Follow the screen installation step 3 and fix the 5 x 40 mm tapping screws to the holes in the

top and down installation bars, three screws on each bar. ( Figure 12 )

b. Concrete wall installation: Follow the screen installation step 3 and drill six proper holes through the concrete wall

with electrical drill, and then nail the screw anchors into the done holes on the wall. Fix the 5 x 40 mm tapping screws

to the holes on the wall through the holes in the top and bottom installation bars, three sets of screws on each bar.

( Figure 13 )

Figure 12 Figure 13

Table of contents

Other Grandview Projection Screen manuals

Grandview

Grandview Edge R3 PE-L Series Instruction Manual

Grandview

Grandview Tripod User manual

Grandview

Grandview Elegant EL-M Series User manual

Grandview

Grandview Edge R7 User manual

Grandview

Grandview LF-VMF-77 User manual

Grandview

Grandview CB-UY92 User manual

Grandview

Grandview Edge R1 Series User manual

Grandview

Grandview Smart Screen User manual

Grandview

Grandview Large Stage MBII User manual

Grandview

Grandview SkyShow Series User manual

Grandview

Grandview Pull Up User manual

Grandview

Grandview FC-FH-MI II Series User manual

Grandview

Grandview Sky-Show User manual

Grandview

Grandview Large-flat Series User manual

Grandview

Grandview DIAS DI-M Series User manual

Grandview

Grandview CN Series User manual

Grandview

Grandview Fantasy FC-FHMI Series User manual

Grandview

Grandview SkyShow Series User manual

Grandview

Grandview Liberty Flash Series User manual

Grandview

Grandview CB-UMxx Series User manual

Grandview

Grandview Skyshow Series User manual

Grandview

Grandview GRIP084V User manual

Grandview

Grandview FC-FHP-MI Series User manual

Grandview

Grandview Fantasy Series FA-Mxx User manual

Popular Projection Screen manuals by other brands

FART PRODUKT

FART PRODUKT Standard SCREEN Installation instruction

Draper

Draper E Series Installation & operating instructions

Elite Screens

Elite Screens Elite Tripod Series user guide

Laarhoven

Laarhoven Companion II General assembly instructions

Renogy

Renogy RMS-LFPS-US manual

Da-Lite

Da-Lite ExecutiveElectrol Instruction book

Samsung

Samsung S*H65* user manual

FONESTAR

FONESTAR PPTR-43100-FA quick start guide

Slide Clear

Slide Clear Varro XL installation instructions

Elite Screens

Elite Screens M85XWS1-SRM manual

OS РХ-090Н user manual

Niko

Niko 10-845 Product information

Speaka Professional

Speaka Professional 2357532 Important information

Sima

Sima XL-72 instruction manual

Jasic

Jasic EVO 2.0 ET-200P Fitting instructions

Elite Screens

Elite Screens Starling 2 Series user guide

InFocus

InFocus SC-WALL GRY-92H Instruction guide

Barco

Barco OverView MVL-615 Brochure & specs