Grandview Large-flat Series User manual

Model：LF-PUxx

GRANDVIEW REPRODUCING GENUINE COLORS

ISO9001:2000

International Certification

Thank you for purchasing a Grandview projection screen.

Before use, please read instructions carefully. After installation, store instructions for future reference.

Grandview Crystal Screen Canada Ltd.

#11- 3751 North Fraser Way,

Marine Way Business Centre,

Burnaby, BC, Canada V5J 5G4

Tel: 1-604-412-9777 Fax: 1-604-412-9796

Website: www.grandviewscreen.ca

Guangzhou Grandview Crystal Screen Co., Ltd.

P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,

Shiqiao, Panyu District, Guangzhou, Guangdong, China

Tel: +8620-8489-9499 Fax: +8620-8480-3343

Website: www.grandviewscreen.com

www.grandviewscreen.com.cn

Installation Guide for

Large-flat Series Prestige Permanent Cinema Screen

List 2 on AA distance between Top bracket and Bottom bracket (Ref. Figure 18)

Size(inch)

4:3

16:9

Dist.(mm)

60" 72" 77" 80" 84" 92" 100" 106" 112" 135"

120" 150"

1025 1208 1284 1330 1391 1513 1726 1818 1940 2168 2397 1635

858 1007 1069 1107 1156 1256 1356 1430 1505 1605 1791 1978

4:3

16:9

60" 72" 77" 80" 84" 92" 100" 106" 112" 135"

120" 150"

20 20 24 24 24 26 28 30 30 32 34 38

18 22 22 22 24 24 28 28 30 30 34 38

Description

Accessories

Side frame

Horizontal frame

Screen fabric

Remark：Two extra Fixing lugs for each screen

Format Size(inch)

Qty(pcs)

Fixing lug

Top bracket

Bottom bracket

Horizontal frame (2pcs)

Side frame (2 )pcs

Horizontal tensioning bar (2 )pcs

Side tensioning bar (2 )pcs

Fixing lug (Ref. list 1)

Corner bracket (4 )pcs

5x10mm Corner screw (16 )pcs

Instruction manual 1( pc)

Top bracket(1pc)

Bottom bracket (1pc)

Fixing lug list 1

Qty(pcs)

Format

Ignoring the safety warnings may

lead to injuries and/or damaging

the product.

Fixtures should be installed in a secure

place to avoid accidents or the screen

falling.

Please contact your local dealer for

repairs or maintenance. Please contact

our company if you have any further

questions. Avoid taking apart the

fixtures yourself. Loose parts may

cause the screen to fall.

Warnings

Do not take apart and replace with unknown parts. If there are any problems, please contact your local dealer.

Product specifications are subject to change.

When installing, make sure it is facing forward. The back of the screen will be labeled with a sticker.

Please read the following as any damage to the screen surface will affect the quality of the picture:

1.The frame is made with lightweight aluminum. Please handle with care.

2.Avoid contact or touching the screen surface as it may cause scratches or tears.

3.Do not write or draw on the surface.

4.Clean the screen with a soft cloth and lukewarm water. Do not use any detergent or cleaning products.

5.Use a cotton cloth to carefully wipe off the dust on the frame to prevent any damages

6.If it is not in use for a long period of time, cover the screen to shut out dust and dirt.

To prevent unnecessary damage, the operating and maintenance of the screen should be done by adults.

Opening the case, the frame has indentations on surface because of packaging in a dry case for a long

time. This is a normal phenomenon and the screen can be used normally. Please stay the screen in a

normal condition that the indentations can be naturally removed. Recovery time will be changed in 1-15

days because of the air humidity, If you want to remove these indentations quickly, please use half-wet

solution.

Methods: Sprinkle water on the surface that can remove the indentations.

5x40 mm Tapping screw

with anchor (8 pcs)

1. Locate Horizontal frames and Side frames on tidy flat surface. (Figure 1)

2. Slide Fixing lugs into grooves on reverse side of frames and align with arrows. (Figure 2-3)

Figure 1

3. Connect Horizontal frame and Side frame with Corner bracket, adjust the Corner bracket to match screw

holes on frame and Corner backet, then fix with the Corner bracket screws. Same way to other 3 Corner

brackets installtion. (Figure 4-7)

Cor ner

9. To tear down the screen, please press the Secure buttons towards wall to release bottom frame from

groove B, then uplift the screen little to release it totally from up groove & bottom groove of the brackets.

(Figure 23-24)

8. Uplift the assembled screen to make sure Up groove meet with Top bracket, and Down groove meet with

Bottom bracket, the Secure button would lock into Groove B because of spring tension when frames are

matched on brackets ideally. (Figure 21-22)

Up groove

Bottom groove

Take out all the parts from the packaging and follow the accessories guideline to ensure you have all parts,

then install the screen as below.

Installation

Side frame

Horizontal frame

Figure 2 Figure 3

Fixing lug

Side frame

Horizontal frame

Figure 4 Figure 5

Figure 6 Figure 7

Figure 21 Figure 22

Figure 23 Figure 24

5. Double align Fixing lugs with arrows. Using the Tensioning bar, pull fabric eyelets over Fixing lugs by your

hands clockwise (Tips: arrange Horizontal tensioning bars first then Side tensioning bars). (Figure 11-15)

6. There is locking system on the Bottom bracket but no on the Top backet, brackets' length are at half of

Horizontal frames'. And there is 5 groups of holes on each brackets with 10cm distance, each group has

3 holes at 5 8 & 6 from left to right. Brackets are suggested to mount at the middle point of frame with

only 30% fluctuation if needed. (Figure 16)

Up bracket

Bottom bracket

Secure button

10CM

7. According to AA distance list on first page, mount two brackets onto the wall separately, assure they are at

horizontal level. (Figure 17-18)

Up bracket

Bottom bracket

4. Unfold screen fabric and insert 4 Tensioning bars seperately into 4 different fabric grooves, be careful not

to poke the fabric. (Figure 8-10)

Figure 8

Figure 10

Figure 9

5mm Tensioning

bar

Figure 11

Figure 12

Figure 13

Figure 14

Figure 15

Figure 16

Figure 17 Figure 18

Here below are the mounting details:

a) Wood wall mounting: to fix the brackets onto the wall using 4 provided Wooden screws 5 x 40, two screws

for each brakcet. (Figure 19)

b) Concrete wall mounting: to use an electric drill to drill 4 holes ( 2 holes for each bracket), and hammer the

provided tapping anchors into each hole, then fix the brackets onto the wall by fastening the tapping screws

to the tapping anchors. (Figure 20)

Figure 19 Figure 20

Other Grandview Projection Screen manuals

Grandview

Grandview Liberty Flash Series User manual

Grandview

Grandview CB-Sxx User manual

Grandview

Grandview Edge R7 User manual

Grandview

Grandview Elegant EL-M Series User manual

Grandview

Grandview CB-Mxx User manual

Grandview

Grandview Edge R1 Series User manual

Grandview

Grandview Fantasy Series FA-Mxx User manual

Grandview

Grandview FC-FH-MF II Series User manual

Grandview

Grandview SkyShow Series User manual

Grandview

Grandview DIAS DI-M Series User manual

Grandview

Grandview LF-HMF-xxx User manual

Grandview

Grandview GRIP084V User manual

Grandview

Grandview LF-PP series User manual

Grandview

Grandview Super Mobile LS-E Series User manual

Grandview

Grandview PT-L Series User manual

Grandview

Grandview Fantasy FC-FHMI Series User manual

Grandview

Grandview LF-VMF-77 User manual

Grandview

Grandview FC-FH-MI II Series User manual

Grandview

Grandview PE-Y (R7)15 Series User manual

Grandview

Grandview Pull Up User manual

Grandview

Grandview CB-Pxx User manual

Grandview

Grandview SkyShow Series User manual

Grandview

Grandview LF-PU Series User manual

Grandview

Grandview Cyber Series CB-MIxx User manual

Popular Projection Screen manuals by other brands

FART PRODUKT

FART PRODUKT Standard SCREEN Installation instruction

Draper

Draper E Series Installation & operating instructions

Elite Screens

Elite Screens Elite Tripod Series user guide

Laarhoven

Laarhoven Companion II General assembly instructions

Renogy

Renogy RMS-LFPS-US manual

Da-Lite

Da-Lite ExecutiveElectrol Instruction book

Samsung

Samsung S*H65* user manual

FONESTAR

FONESTAR PPTR-43100-FA quick start guide

Slide Clear

Slide Clear Varro XL installation instructions

Elite Screens

Elite Screens M85XWS1-SRM manual

OS РХ-090Н user manual

Niko

Niko 10-845 Product information

Speaka Professional

Speaka Professional 2357532 Important information

Sima

Sima XL-72 instruction manual

Jasic

Jasic EVO 2.0 ET-200P Fitting instructions

Elite Screens

Elite Screens Starling 2 Series user guide

InFocus

InFocus SC-WALL GRY-92H Instruction guide

Barco

Barco OverView MVL-615 Brochure & specs