Grandstream Networks GXP2170 Installation guide

Advanced Networking, Inc.

Telephone 302-792-9200 Facsimile 302-792-9294

www.advnetwork.com

Member: DE State Chamber of Commerce

Connecting Your World Since 1987

Telephone and Voice Mail Systems E-Fax Network Wiring

Hosted Phone System and Dial Tone Services Voice Mail Rental Boxes

1316 Philadelphia Pike Wilmington, DE 19809

Basic Instructions for Your Grandstream GXP2170 IP Phone

Visual Overview of the Phone

Version 2.0

Advanced Networking, Inc.’s Grandstream GXP2170 User Instructions

Page 2of 7

Operation of the Screen and Soft Keys

The GXP2160 has a dynamic display, which means it changes, depending on what the phone is doing at the time.

The home screen shows the lines, the parks, and the other buttons that are programmed. There can be multiple levels

to this page, which are indicated by the page numbers up in the left corner of the screen. More than one level can be

programmed to accommodate more DSS keys. To move to the next page, press the Next soft key.

TO “PAGE”AN EXTENSION (INTERCOM CALLING)

For intercom paging, press ** and then enter the extension or group number of the party or group you want to page. This

feature will call an extension or group of extensions, allowing you to speak immediately over the speaker in the telephone

without ringing the phone itself.

PARKING A CALL (SYSTEM-WIDE HOLD)

It is best to use the Park orbits when placing a call on hold for someone else.

1. While on the call, press the Park key.

2. The status of orbits 701, 702, and 703 are usually displayed on every phone.

3. One of the Park Orbit buttons will then light up, indicating where the call is Parked. .

4. To retrieve the parked call, press the red Park 70X button.

5. If the call is on Park orbit 704 or higher, the user will then have to manually dial 7XX number to retrieve the call.

PLACING A CALL ON HOLD (EXCLUSIVE HOLD)

1. While on the call, press the Hold key. This will place the call on hold on one of the Line keys.

2. If you need to place another call after you put the call on hold, you will have to hit the Line 2key to get another line. Dial as

needed and press the Dial soft key to send the digits.

Advanced Networking, Inc.’s Grandstream GXP2170 User Instructions

Page 3of 7

PLACING A CALL ON HOLD AUTOMATICALLY TO ANSWER A SECOND CALL

1. When you’re on the first call, the second Line key will blink Red. To answer the second call, press the blinking red Line key.

2. This will automatically put the first call on hold.

3. To switch between the lines, just press the appropriate Line Key. (There is no need to put the calls on hold as this is done

automatically).

4. To drop one of the calls, make sure you are on that line that you wish to drop and press the End Call soft key or hang up.

PICKING UP A CALL ON HOLD

1. Press the Line button that is blinking where the call is on hold.

2. Or Press the Pickup soft key to pick up the last call you placed on hold.

PICKING UP A CALL THAT IS RINGING ON ANOTHER PHONE

1. Dial the digits 99

2. Pick up the handset or press the speaker button. You have now picked up that call.

TRANSFERRING A CALL

Supervised Transfer

1. While on the call, press the Transfer key .

2. Enter the extension number or outside number.

3. Press the # (pound) key.

4. Wait for the person to answer and announce the call.

5. If they want it, press the Transfer key again and hang up.

6. If the person does not want the call or does not answer, press the Split soft key.

7. Press the End soft key to end the call.

8. Press the blinking Line key which still has the original caller on hold to get the caller back.

Supervised Transfer Using a Programmable Key as the Destination

1. While on the call, press the Transfer key

2. Press the programmable DSS/BLF button of the person to whom you wish to transfer the call.

3. Announce the call.

4. If they want it, press the Transfer key again and hang up.

5. If the person does not want the call or does not answer, press the Split soft key.

6. Press the End soft key to end the call.

7. Press the blinking Line key which still has the original caller on hold to get the caller back.

Unsupervised Transfer

1. While on the call, press the Transfer key.

2. Enter the extension number, press the Transfer key again and then hang up.

3. The user still has the option to take or reject the call once it is transferred to them.

Advanced Networking, Inc.’s Grandstream GXP2170 User Instructions

Page 4of 7

TRANSFERRING A CALL DIRECTLY TO VOICEMAIL

1. While on the call, press the Transfer key.

2. Press * and the extension number.

3. Press the Blind Transfer key below the display and the call is directly routed to the user’s voicemail.

MAKING CONFERENCE CALLS

1. Make the first call as usual.

2. Press the Conference key. .

3. Dial the second number.

4. Wait for the second party to answer.

5. To bring all three parties together, hit the Conf key again.

6. If you make a mistake while dialing or the second party is not there, press the Cancel soft key and press the blinking Line

key to return to the previous caller.

You can only add up to 3 parties including yourself to the Conference Call. If you need to add more, you can use the Meet-

Me-Conferencing Feature.

USING THE SPEAKERPHONE

1. Dial the number and then press the Speakerphone/Headset button.

2. To hang up, press the Speaker button.

3. You may also pick up the handset to take the phone out of speakerphone mode.

VOLUME CONTROLS

The volume keys change the volume of the ringer, the handset, and the speakerphone. To change the volume of the ringer,

press up or down when the phone is not off-hook.

TO PROGRAM A STATION/EXTENSION KEY (TO INTERCOM ANOTHER PHONE)

1. Press and hold down the key you wish to program until the screen shows the programming info on it.

2. Select the Mode by pressing the right arrow until you see Busy Lamp Field (BLF)

3. Scroll Down by pressing the down arrow twice to the Description field.

4. Enter the Name of key by using your dial pad to enter in the letters or numbers.

a. There is a soft key that says 1Bc. You may press this button and it will change the input mode of the keypad.

i. 1Bc –is both alpha and numeric in upper case and lower case. We do not recommend you use this mode.

ii. ABC –is all caps

iii. abc –is all lower case

iv. 123 –is all numeric

b. For example, to enter a lower case “s”, you’d be abc mode, and then hit the seven key four times.

c. To move on to the next character, or move back, use the arrow keys.

5. When the name is complete, press the down arrow again to the Value field.

6. Enter in the extension number of the button.

a. If you want to be able to “intercom” (page) the extension, enter a * * (two stars) before the extension number.

b. If you want it to just ring, just enter the extension number.

7. Press the soft key with the word Save above it to save your settings.

Advanced Networking, Inc.’s Grandstream GXP2170 User Instructions

Page 5of 7

VOICEMAIL SYSTEM

SETTING UP YOUR VOICEMAIL

The first time you access your mailbox, the system will walk you through setting up your password, name recordings, and

greetings. Please follow this all the way through and it will not play the tutorial again. The following instructions are for

when you need to change something after the initial setup.

Recording Your Greetings

1. Press the Message key .

2. Enter your password. In default, this your extension number, followed by the #key.

3. Press 0for Mailbox Options.

4. You have the option of recording up to three greetings. At the very least, record an Unavailable Message. Press 1to

record the Unavailable Message.

5. Record the message after the tone and press pound.

6. To keep the message, press 1to accept the message. If not satisfied, press 3to re-record and repeat steps 5 and 6.

Recording name

1. Press the Message key.

2. Enter your password, followed by the #key.

3. Press 0for Mailbox Options.

4. Press 3to record your name.

5. Record the name after the tone and press pound.

6. To keep the message, press 1to accept the message. If not satisfied, press 3to re-record and repeat steps 5 and 6.

Setting Your Mailbox Passwords

We strongly recommend you change your voicemail password as soon as possible. By default, it is your extension number.

Anyone who knows this can access your mailbox through the web and listen to and delete your messages, see your call logs, and

modify settings on your extension.

1. Press the Message key.

2. Enter your password, followed by the #key.

3. Press 0 for Mailbox Options.

4. Press 5 to change your password.

5. Please enter your new password, followed by the pound key.

6. Re-enter your password followed by the pound key for confirmation.

7. If everything is correct, the system will tell you your password has been changed.

Advanced Networking, Inc.’s Grandstream GXP2170 User Instructions

Page 6of 7

Recording a Temporary Greeting

Use the Temporary Greeting when you want to record a greeting that you plan to use for a limited time (for example an out-of-office

greeting).

1. Press the Message Key.

2. Enter your password, followed by the #key.

3. Press 0for Mailbox Options.

4. Press 4to record your Temporary Greeting

5. After the tone, record your temporary greeting.

6. Press #when finished.

7. Follow the prompts to confirm or record the greeting again.

Deleting Temporary Greeting

When you want to use your original greeting, delete your temporary greeting. To do this:

1. Press the Message Key.

2. Enter your password, followed by the #key.

3. Press 0for Mailbox Options

4. Press 4to record your Temporary greeting.

5. Press 2to delete your Temporary Greeting.

6. Hang up

Listening To Messages

New messages

1. Press the Message key.

2. Enter your password, followed by the #key.

3. Press 1to listen to new messages.

4. Follow the prompts to save, delete, etc.

Old messages

1. Press the Message key. .

2. Enter your password, followed by the #key.

3. Press 2to change folders.

4. Press 1for old messages (or listen to the prompts to select another folder).

5. Follow the prompts.

To retrieve messages from another extension (on-site)

1. Dial 924 for the Voicemail Gateway.

2. Enter your extension or mailbox number.

3. Enter your password.

Advanced Networking, Inc.’s Grandstream GXP2170 User Instructions

Page 7of 7

To retrieve messages remotely (Off-Site)

If your system is answered by an auto-attendant or a Voicemail “Backdoor” number:

1. Dial the main number or backdoor number.

2. Press # for the Voicemail Gateway.

3. You will be prompted to enter your mailbox number, then your password.

4. Follow the prompts to listen to messages.

If you call your own direct-dial number:

1. Dial your direct-dial (private number)

2. Wait for the voicemail to pick up with your personal greeting.

3. Press * (star) for the voicemail gateway.

4. You will be prompted to enter your mailbox number and then your password.

5. Follow the prompts to listen to your messages.

Further on-line help:

Visit our website at http://www.advnetwork.com/support.html

Other manuals for GXP2170

Table of contents

Other Grandstream Networks IP Phone manuals

Grandstream Networks

Grandstream Networks GXV-3000 User manual

Grandstream Networks

Grandstream Networks GRP26 Series User manual

Grandstream Networks

Grandstream Networks GXP14XX User manual

Grandstream Networks

Grandstream Networks BroadWorks BLF GRP260X User manual

Grandstream Networks

Grandstream Networks GXP2124 User manual

Grandstream Networks

Grandstream Networks GXP21 Series User manual

Grandstream Networks

Grandstream Networks GDS3710 User manual

Grandstream Networks

Grandstream Networks GXV3275 User manual

Grandstream Networks

Grandstream Networks GXP16 Series User manual

Grandstream Networks

Grandstream Networks GXP2160 User manual

Grandstream Networks

Grandstream Networks GXP-1100 User manual

Grandstream Networks

Grandstream Networks GXP2135 User manual

Grandstream Networks

Grandstream Networks GXV324 User manual

Grandstream Networks

Grandstream Networks GXV-3000 User manual

Grandstream Networks

Grandstream Networks GXV3175 User manual

Grandstream Networks

Grandstream Networks GXP-1100 User manual

Grandstream Networks

Grandstream Networks GXP2160 User manual

Grandstream Networks

Grandstream Networks GXP2160 Installation guide

Grandstream Networks

Grandstream Networks GXV3240 User manual

Grandstream Networks

Grandstream Networks GXP2135 User manual

Grandstream Networks

Grandstream Networks DP715 Instruction sheet

Grandstream Networks

Grandstream Networks GXP-280 User manual

Grandstream Networks

Grandstream Networks GXP17 Series User manual

Grandstream Networks

Grandstream Networks DP715 User manual

Popular IP Phone manuals by other brands

Alcatel

Alcatel 4028 manual

Polycom

Polycom Polycom VVX 600 quick reference

Polycom

Polycom SoundPoint IP 450 datasheet

Cisco

Cisco SPA-500 Series user guide

Polycom

Polycom SoundPoint IP 650 user guide

Proximus

Proximus Maestro 3016 IP quick start guide

Fanvil

Fanvil X4 user manual

Cisco

Cisco 7962 user guide

Snom

Snom 320 quick start guide

Yealink

Yealink Yealink SIP-T46G Guide

Avaya

Avaya 4625SW user guide

Yealink

Yealink SIP-T52S quick start guide

Nortel

Nortel 1140E Getting started

Nexotek

Nexotek NT-P500 user manual

Avaya

Avaya Integral 5 R3.0 user guide

GE 28320EE2 - Dect 6.0 InfoLink 2 user guide

Avaya

Avaya 4600 Series Administrator's guide

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP user guide