Graco 223–390 Operation manual

GUN NOT INCLUDED

INSTRUCTIONS-PARTS

LIST

308–011

Rev A

SPRAY

GUN EXTENSION

4050

psi (280 bar) MAXIMUM WORKING PRESSURE

Model 223–390 12 in. (305 mm) long

Model 223–391 18 in. (457 mm) long

Model 223–392 24 in. (610 mm) long

Fits all Graco high pressure spray guns.

(Adapters available for other guns)

Includes DripLess



Tip Guard.

Order spray tip separately.

Pressure

Relief Procedure

o reduce the risk of serious bodily injury

, including

fluid injection, splashing fluid or solvent in the eyes or

on the skin, or injury from moving parts or electric

shock, follow this procedure whenever you shut of

the sprayer

, when checking or servicing any part of

the spray system, when installing, cleaning or chang

ing spray tips, and whenever you stop spraying.

Engage the gun safety latch.

Shut of

f the pump and unplug it (or disconnect the

spark plug).

Disengage the gun safety latch. Hold metal spray

extension firmly to the side of a grounded metal

pail, and trigger the gun to relieve pressure.

Engage the gun safety latch.

Open the sprayer

’

s pressure drain valve, having a

container ready to catch the drainage. Leave the

valve open until you are ready to spray again.

If you suspect that the spray tip or hose is com

pletely clogged, or that pressure has not been fully

relieved after following the steps above,

VER

SLOWL

Y loosen the tip retainer nut or hose end cou

pling to relieve pressure gradually

, then loosen com

pletely

. Now clear the tip or hose.

WARNING

Hazard of Using Fluids Containing Halogenated Hydrocarbons

Never use 1,1, 1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids con

taining such solvents in this equipment. Such use could result in a serious chemical reaction, with the possibil

ity of explosion, which could cause death, serious bodily injury and/or substantial property damage.

Consult your fluid suppliers to ensure that the fluids being used are compatible with aluminum and zinc parts.

WARNING

GRACO INC. P.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

COPYRIGHT

1990, GRACO INC.

This

manual contains

IMPORTANT

INSTRUCTIONS and WARNINGS.

READ AND RETAIN FOR REFERENCE.

INSTALLATION PARTS LIST

the

Pressure Relief Procedure

on the first

page.

See the drawing below for assembling the extension.

Before installing the spray tip, start and prime the

sprayer.

Install the tip in the tip guard and be sure to install the

tip gasket. Screw the tip guard firmly onto the adapter

NOTE:

A Reverse-A-Clean IV

DripLess

tTip

Guard may be used in place of the one

supplied with the extension.

Flushing

Follow the flushing guidelines given in your seperate

pump instruction manual. Be sure to relieve fluid pres

sure, and then remove the spray tip before flushing.

This reduces the risk of static sparking and splashing

fluid in the eyes.

Model 223–390 12 in. (305 mm) long

Model 223–391 18 in. (457 mm) long

Model 223–392 24 in. (610 mm) long

REF

NO. PART

NO.

DESCRIPTION QTY

180–137 NUT

, gun

180–136

ADAPTER, tip

166–969 W

ASHER, tip

220–222

TIP GUARD

EXTENSION TUBE

218–244

12 in.

for Model 223–390

218–245

18 in.

for Model 223–391

218–246

24 in.

for Model 223–392

ACCESSORIES

Must be purchased separately

SPRA

Y GUNS

Includes Reverse–A–Clean IV DripLess

ip Guard and a SwitchT

ipt

“SIL

VER” GUN

220–954

5000 psi (350 bar) Max. Working Pressure

SwitchTipt is

size 517.

“CONTRACT

OR” GUN

220–955

3600 psi (248 bar) Max. Working Pressure

SwitchTipt is

size 517.

“BLACK MAX” GUN

220–730

3600 psi (248 bar) Max. Working Pressure

SwitchTipt is

size 513.

REVERSE-A-CLEANt

IV DripLess

ip Guard

220–422

Uses fluid pressure to remove tip clogs. Purchase

SwitchTipt

separately

ADAPTER GUN NUTS for other guns

Use in place of 180–137.

180–147

Fits Binks high pressure guns

180–146

Fits W

agner high pressure guns

TECHNICAL

Maximum

orking Pressure

4050 psi (280 bar)

. . . . .

Wetted

Parts

Aluminum, Plastic,

. . . . . . . . . . . . . . . . . .

Stainless

Steel, Plated Steel

Weight

223–390

6.9 oz (195 g)

. . . . . . . . .

223–391

8.4

oz (239 g)

. . . . . . . . .

223–392

oz (283 g)

. . . . . . . . . .

Factory

Branches:

Atlanta, Chicago, Dallas, Detroit, Los Angeles, W

est Caldwell (N.J.)

Subsidiary and Affiliate Companies:

Canada; England; Switzerland; France; Germany; Hong Kong; Japan

GRACO INC.

.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

PRINTED

IN U.S.A.

308–01

1 2–90

GUN NOT INCLUDED

TIP NOT INCLUDED

This manual suits for next models

Table of contents

Other Graco Paint Sprayer manuals

Graco

Graco AIRLESSCO SP400 Hi Boy Operating instructions

Graco

Graco 16N664 User manual

Graco

Graco HVLP Series Guide

Graco

Graco 234237 User manual

Graco

Graco 248650 Use and care manual

Graco

Graco Reactor A-25 Instruction Manual

Graco

Graco 207-279 User manual

Graco

Graco Ultra-Lite 240-200 Operation manual

Graco

Graco ti2652b User manual

Graco

Graco 238338 User manual

Graco

Graco HYDRA-CLEAN C Series Operation manual

Graco

Graco TrueCoat 360 User manual

Graco

Graco FinishPro HVLP 7.0 Use and care manual

Graco

Graco 233889 User manual

Graco

Graco REACTOR E-20 Assembly instructions

Graco

Graco Fine Finish HVLP 7.0 Use and care manual

Graco

Graco 695 HI Instruction Manual

Graco

Graco HydraSprayr 230975 User manual

Graco

Graco Ultra Max II 695 Manual

Graco

Graco PRO Auto Xs Operation manual

Graco

Graco SG2 User manual

Graco

Graco Series A Operation manual

Graco

Graco ULTRA 600 231-307 Series A Operation manual

Graco

Graco TexSpray 1030 FC User manual

Popular Paint Sprayer manuals by other brands

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Operator's manual

Binks

Binks SV100 Service manual

Fimco

Fimco LG-4-3-1 owner's manual

AG SPRAY

AG SPRAY FS-ATV-25BL owner's manual

Nordson

Nordson MicroMax 2 manual

Bonide

Bonide 051 Operation and service instructions

zogics

zogics Z-DAS instruction manual

KISANKRAFT

KISANKRAFT KK-KBS-165 Operation manual

Matrix

Matrix SG 650 Translation of the original instructions

Anest Iwata

Anest Iwata SGA-3 Installation, use & maintenance instruction manual

paasche

paasche VV Instructions and parts list

Carlisle

Carlisle DeVilbiss JGA-510 Service manual

Gardena

Gardena 11120 Operator's manual

Conrad

Conrad Hobby Airbrush K3 operating instructions

wiwa

wiwa 14025 R/F operating manual

DeVilbiss

DeVilbiss LUNA2i Operation manual

WAGNER

WAGNER W 125 manual

My Clean Buddy

My Clean Buddy PW018 user manual