Graco 246737 User manual

TI3477A

Operating Instructions

GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441

230E Airless Paint Sprayer

Model 246737

3000 psi (20.7 MPa, 207 bar) Maximum Working Pressure

309859B

Related Manuals

309860 – Repair

309646 – Tool Tips

309060 – Pump Repair

Important Safety Instructions

Read all warnings and instructions in this

manual. Save these instructions.

2309859

The following are general warnings related to the setup, use, grounding, maintenance and repair of this equipment.

Additional, more specific warnings may be found throughout the body of this manual where applicable. Symbols

appearing in the body of the manual refer to these general warnings. When these symbols appear throughout the

manual, refer back to these pages for a description of the specific hazard.

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help

prevent fire and explosion:

DUse equipment only in well ventilated area.

DEliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic

drop clothes (potential static arc).

DSprayer generates sparks. When flammable liquid is used in or near sprayer or for flushing or

cleaning, keep sprayer at least 20 ft (6 m) away from explosive vapors.

DKeep work area free of debris, including solvent, rags and gasoline.

DDo not plug or unplug power cords or turn lights on or off when flammable fumes are present.

DGround equipment and conductive objects in work area. Read Grounding instructions.

DIf there is static sparking or you feel a shock, stop operating immediately. Do not use equipment

until you identify and correct the problem.

DKeep a fire extinguisher in the work area.

ELECTRIC SHOCK HAZARD

Improper grounding, setup, or usage of the system can cause electric shock.

DTurn off and disconnect power cord before servicing equipment.

DUse only grounded electrical outlets

DUse only 3–wire extension cords.

DEnsure ground prongs are intact on sprayer and extension cords.

DDo not expose to rain. Store indoors.

PRESSURIZED ALUMINUM PARTS HAZARD

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or

fluids containing such solvents in this equipment. Such use could result in a serious chemical reaction,

with the possibility of explosion, which could cause death, serious injury and/or substantial property

damage.

3309859

WARNING

SKIN INJECTION HAZARD

High pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like

just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

DDo not point gun at anyone or any part of the body.

DDo not put your hand over the spray tip.

DDo not stop or deflect leaks with your hand, body, glove, or rag.

DEngage trigger lock when not spraying.

DFollow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning,

checking or servicing equipment.

INSTRUCTIONS

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

DDo not exceed the maximum working pressure or temperature rating of the lowest rated system

component. Read Technical Data in all equipment manuals.

DUse fluids and solvents that are compatible with equipment wetted parts. Read Technical Data in

all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information

about your material, request MSDS from distributor or retailer.

DCheck equipment daily. Repair or replace worn or damaged parts immediately with genuine Graco

replacement parts only.

DDo not alter or modify equipment.

DUse equipment only for its intended purpose. Call your Graco distributor for information.

DRoute hoses and cables away from traffic areas, sharp edges, moving parts and hot surfaces.

DDo not kink or overbend hoses or use hoses to pull equipment.

DKeep children and animals away from work area.

DDo not operate the unit when fatigured or under the influence of drugs or alcohol.

DComply with all applicable safety regulations.

TOXIC FLUID HAZARD

Toxic fluid or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or

swallowed.

DRead MSDS’s to know the specific hazards of the fluids you are using.

DStore hazardous fluid in approved containers and dispose of it according to all applicable guide-

lines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating

area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic

fumes, burns, and hearing loss. This equipment includes, but is not limited to:

DProtective eye wear.

DClothing and respirator as recommended by the fluid and solvent manufacturer.

DGloves.

DHearing protection.

4309859

DThe sprayer requires a 120V AC, 60 Hz, 15A circuit

with grounding receptacle. Never use an outlet that is

not grounded or an adapter.

DDo not use the sprayer if the electrical cord has a damaged

ground prong. Only use an extension cord with an undamaged,

3–prong plug.

DRecommended extension cords for use with this sprayer:

D25 ft (7.6 m) 18 AWG

D50 ft (15.2 m) 16 AWG

D100 ft (30.5 m) 14 AWG

D150 ft. (45.7 m) 12 AWG

Smaller gauge or longer extension cords may reduce sprayer

performance.

Grounding and Electric Requirements

ti5572a

DGround sprayer gun through connection to a

properly grounded fluid hose and pump.

DGround fluid supply container. Follow local code.

The sprayer must be grounded. Grounding reduces the risk of static and

electric shock by providing an escape wire for the electrical current due to

static build up or in the event of a short circuit.

ti3001b

5309859

Grounding and Electric Requirements

DGround solvent pails used when flushing. Follow local code. Use

only conductive, metal pails, placed on a grounded surface such as

concrete. Do not place the pail on a non–conductive surface such

as paper or cardboard, which interrupts the grounding continuity.

ti5850a

ti5851a

DGround the metal pail by connecting a ground wire to the

pail by clamping one end to pail and the other end to

ground such as as water pipe.

DMaintain grounding continuity when flushing or

relieving pressure by holding metal part of spray gun

firmly to side of a grounded metal pail, then trigger gun.

Thermal Overload

DMotor has a thermal overload switch

to shut itself down if overheated.

To reduce risk of injury from motor staring

unexpectedly when it cools, always turn power

switch OFF if motor shuts down.

6309859

PRESSURE RELIEF

1. Turn power OFF and unplug sprayer.

2. Turn pressure to lowest setting and trigger

gun to relieve pressure.

3. Make sure drain tube is in pail. Turn

prime valve down.

WASTE

Do this when cleaning, repairing or shutting down

sprayer.

7309859

Power

Switch

Pressure Control

Decrease

Pressure

Increase

Pressure

Component Identification

Suction Tube

Drain Tube

Prime Valve

Prime/drain position

Paint position

Spray Gun Trigger Safety

LOCK trigger safety

when not spraying.

UNLOCK trigger safety

before triggering gun.

Filter

TI3183a

TI3477A

Fluid Outlet

Suction tube + drain

tube = Siphon tube set

8309859

1. Connect airless hose to sprayer.

Tighten securely.

2. Connect other end of hose to gun.

Setup

3. Tighten securely.

4. Remove tip guard.

TI3489A

TI3490A

TI3491A

9309859

5. Check inlet strainer for clogs and debris.

6. Turn power OFF.

TI3183a

10 309859

1. Plug power supply cord into a properly

grounded electrical outlet.

PAINT

FLUSH

2. Turn prime valve down.

3. Place siphon tube set in grounded metal

pail partially filled with flushing fluid.

4. Attach one end of ground wire to pail and

other end to sprayer or a true earth ground.

5. Do Steps 1 – 5 of Startup to flush out

storage oil. Use water to flush water-base

paint and mineral spirits to flush oil-base

paint and storage oil.

Startup

6. Turn pressure control to lowest pressure.

Other manuals for 246737

Table of contents

Other Graco Paint Sprayer manuals

Graco

Graco 24V112 Instruction Manual

Graco

Graco 16N664 User manual

Graco

Graco TexSpray 235490 Operating instructions

Graco

Graco 231-034 Datasheet

Graco

Graco Reactor E-20 Series User manual

Graco

Graco GX-7A Quick start guide

Graco

Graco 255108 Parts list manual

Graco

Graco 3A4442B User manual

Graco

Graco HVLP Series Guide

Graco

Graco MERKUR 309463N Operation manual

Graco

Graco ToughTek S340e Use and care manual

Graco

Graco 25T804 User manual

Graco

Graco T-MAX 506 Manual

Graco

Graco ProShot 258865 User manual

Graco

Graco Xtreme 3Z9329L User manual

Graco

Graco XTR 7 User manual

Graco

Graco Pro 395st Operating instructions

Graco

Graco 24F150 Parts list manual

Graco

Graco PROX17 User manual

Graco

Graco Reactor 2 H-30 Instruction Manual

Graco

Graco LineLazer 130HS Manual

Graco

Graco Reactor H-VR Use and care manual

Graco

Graco dutymax eh 230 Guide

Graco

Graco ULTRA AIRLESS 230-963 Datasheet

Popular Paint Sprayer manuals by other brands

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Operator's manual

Binks

Binks SV100 Service manual

Fimco

Fimco LG-4-3-1 owner's manual

AG SPRAY

AG SPRAY FS-ATV-25BL owner's manual

Nordson

Nordson MicroMax 2 manual

Bonide

Bonide 051 Operation and service instructions

zogics

zogics Z-DAS instruction manual

KISANKRAFT

KISANKRAFT KK-KBS-165 Operation manual

Matrix

Matrix SG 650 Translation of the original instructions

Anest Iwata

Anest Iwata SGA-3 Installation, use & maintenance instruction manual

paasche

paasche VV Instructions and parts list

Carlisle

Carlisle DeVilbiss JGA-510 Service manual

Gardena

Gardena 11120 Operator's manual

Conrad

Conrad Hobby Airbrush K3 operating instructions

wiwa

wiwa 14025 R/F operating manual

DeVilbiss

DeVilbiss LUNA2i Operation manual

WAGNER

WAGNER W 125 manual

My Clean Buddy

My Clean Buddy PW018 user manual