Global 695746 User manual
Instruction Manual Manuel d'instruction
Customer
Service:
US:
1-800-645-2986
Service
à
la
clientèle
Canada:
888-645-2986
1
Non-Contact Digital Infrared
Forehead Thermometer
Temperature Range: 91.4°-109.4°F (33°-43°C)
Measuring Distance Range: 1-1/6 – 2 in.
Power Supply: DC 3V - 2 AAA batteries (not included)
Response Time: 1 Second
Memory Data: 20 Records
High-Fever Warning: 5 Beeps
Display: Blue LCD
Low Battery Alarm: Yes
Product Weight: 1/4 lb. (excluding batteries)
Product Dimensions: 6.1"L x 3.5"W x 1.7"H
Certification: FDA
Ambient Temp. Working Range: 60°-95°F (16°-35°C)
Specifications
Model 695746
Read entire manual before operation. For additional
questions or concerns, contact Global Industrial Customer
Service at 1-800-645-2986 or visit www.globalindustrial.com.
WARNING
• Product to be used in ambient temperatures between
60°-95°F (16°-35°C).
• DO NOT use this product in an environment with a relative
humidity greater than 93%.
• DO NOT place this product too close to the electromagnetic
range, (examples: radio, mobile phone, etc.).
• DO NOT expose to excessive heat or water.
• DO NOT use if product is damaged.
• Sweat, hair, hats, or other foreign matter on the forehead
can affect the accuracy of the measurement.
• Ensure the measurement distance is within 1 to 2 inches.
• Contact Global Industrial if there are any problems with
the thermometer, DO NOT attempt to do any repairs yourself.
• Keep this manual for future use.
globalindustrial.ca
Instruction Manual
2
①
②
③
④
⑤
⑥
⑦
⑧
①
LCD Display
②Function Button
③“+” Button
④“-” Button
⑤Infrared Sensor
⑥Measurement Trigger
⑦Handle
⑧Battery Cover
Operation Instructions
1. Insert batteries - Open the battery cover and insert (2) AAA batteries (not included)
into the bottom of the thermometer. Close the battery cover.
2. The thermometer will beep.
3. Tap the FUNCTION button to switch between “body” and “surface” temperature modes.
4. Press the MEASUREMENT TRIGGER to measure forehead temperature. In order to get
an accurate measurement, ensure the thermometer is 1 to 2 inches away from the forehead.
5. Press “+” or “-” buttons to review the last 20 measurement results.
6. Press and hold the FUNCTION button for 3 seconds to access the different function modes
below. Tap the FUNCTION button again to scroll through the following modes:
- F1: °F or °C unit mode - Press “+” or “-” button to select.
- F2: Max. temperature alarm mode; press “+” or “-” button to select.
- F3: Display data offsetting mode; press “+” or “-” button to select.
- F4: Buzzer sound activate/deactivate mode; press “+” or “-” button to select.
Note: Pressing the MEASUREMENT TRIGGER button will exit during any set up mode.
7. The thermometer will automatically shut-off when idle and will turn back on by pressing
any button.
Component Identification
Digital Infrared Forehead Thermometer
Product Maintenance
Note: Be sure not to damage and use extra precaution when cleaning the infrared sensor.
• Do not use abrasive cleaners to clean this product.
• Do not submerge the product into water or other liquids.
• Keep the product in a dry place to avoid dust, pollution and direct sunlight.
• Clean regularly using a dry soft cloth. If needed, use a damp cloth with water or a neutral
detergent to clean, then wipe dry with a clean cloth.
Table of contents
Other Global Thermometer manuals
