Gigabyte S251-3O0 User manual

Giga Computing GIGABYTEChannel

@GIGABYTEServer GIGABYTEofficial

How To Install a Server into a Tank

S251

Installing Server

Installation

1 Attach the two carabiners to server handles.

2 Put the server into the tank vertically.

 Strongly recommended to use gloves when handling the coolant.

 Before handling coolant, handlers must read the material safety data sheet (MSDS) for their safety.

 The thermal pad contains Indium foil, so it is strongly recommended to use gloves

when replacing the thermal pad.

DANGER!

CAUTION!

 Make sure the crane can handle at least 60 KG before installing the server into a tank.

 Only licensed professionals are authorized to access the restricted access location.

 The power supply fan is disabled by default, so the server must be immersed in the fluid before powering on.

 Consult with immersion cooling tank vendor to ensure compatibility and read their tank manual thoroughly.

 Do not install a GPU into the system without consulting GIGABYTE first, doing so may cause

compatibility issues.

Giga Computing GIGABYTEChannel@GIGABYTEServer GIGABYTEofficial

Learn more about GIGABYTE server, visit www.gigabyte.com/Enterprise

* All specifications are subject to change without notice. Please visit our website for the latest information.

* All other brands, logos and names are property of their respective owners.

Engineered by

How To Install a Thermal Pad to CPU

Installing Thermal Pad

Installation

1 Place the thermal pad at the bottom of the CPU heatsink

2. Align the carrier assembly so that the triangle on the carrier aligns with the triangle on the heatsink, and then

install the carrier assembly onto the bottom of the heatsink.

 Strongly recommended to use gloves and mask when handling the thermal pad.

 The thermal pad contains Indium foil, so it is strongly recommended to use gloves

when replacing the thermal pad.

DANGER!

2 When installing the heatsink to CPU, use a T30 Lobe screwdriver to tighten 4 captive nuts in sequence as 1-4.

The screw tightening torque: 8 ± 0.5 kgf-cm.

Other manuals for S251-3O0

This manual suits for next models

Table of contents

Other Gigabyte Server manuals

Gigabyte

Gigabyte R283-ZF1-AAL1 User manual

Gigabyte

Gigabyte GS-SR295 User manual

Gigabyte

Gigabyte GS-SR102 User guide

Gigabyte

Gigabyte GS-SR326 User guide

Gigabyte

Gigabyte GS-SR125ED User manual

Gigabyte

Gigabyte T181-Z70 User manual

Gigabyte

Gigabyte E152-ZE0 User manual

Gigabyte

Gigabyte G292-Z45-ICU1 User manual

Gigabyte

Gigabyte G262-ZO0 User manual

Gigabyte

Gigabyte G593-SD2-AAX1 User manual

Gigabyte

Gigabyte R283-Z91-AAV1 User manual

Gigabyte

Gigabyte R283-S94-AAC1 User manual

Gigabyte

Gigabyte R283-S93-AAF1 User manual

Gigabyte

Gigabyte R183-SF0-AAJ1 User manual

Gigabyte

Gigabyte G293-Z40-AAP1 User manual

Gigabyte

Gigabyte R263-Z32-AAC1 User manual

Gigabyte

Gigabyte G292-Z45 User manual

Gigabyte

Gigabyte TO15-S40-IA01 User manual

Gigabyte

Gigabyte H273-Z81-AAN1 User manual

Gigabyte

Gigabyte H262-ZL2 User manual

Gigabyte

Gigabyte R162-ZA1 User manual

Gigabyte

Gigabyte H263-S63-AAN1 User manual

Gigabyte

Gigabyte G493-ZB3-AAP1 User manual

Gigabyte

Gigabyte G482-Z53 User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started