GET GCCTV1000BW User manual

Instructions for:

Professional Black and

White CCTV System

GCCTV1000BW

Professional Colour

CCTV System

GCCTV1001C

Explanation of terms used in these instructions.

CCTV Closed Circuit Television

6 pin din Type of connection plug

SCART Type of Socket used on televisions in Europe – VCR units to input/

output of audio and video signals.

Infra-red LED’s Light emitting diodes that work on the infra-red spectrum.

(Invisible to the human eye).

TV Television

VCR Video cassette / recorder

1 way sound A microphone within the CCTV Camera that transmits

sound from the camera position.

Contents

Black and White System

1X Black and White camera

with 4 metres cable and 6 pin

din connector.

1X15 metres CCTVcamera cable

with 6 pin din connector and

SCART adaptor.

1X 6V 350mA DC mains

adaptor.

1X Fixing Kit instructions.

Contents

Colour System

1X Colour camera with 4

metre cable and 6 pin din

connector.

1X 15 metres CCTV camera

cable with 6 pin din connector

and SCART adaptor.

1X 6V 350mA DC mains

adaptor.

1X fixing kit and instructions.

Congratulations on purchasing a GET

Home / Workplace CCTV System. The

camera is compact and designed for

both outdoorand indooruse.The Black

andWhite camera is equipped with Infra

– Red LED’s that allow you to see in

the dark in close proximity to the camera

position. (We recommend additional

lighting to be installed if you wish to

cover a largerarea of view). Colour

Cameras require additional lighting for

night time operation.

We advise that you read these

instructions before installing the system

even though it is a plug in and play

system. The system easily connects to

any standard TV orVCR with a SCART

socket.

It allows you to see and hear events at

the camera location by simply tuning

yourTV orVCR to an AV channel.

The Black and White – Colourcameras

are ideal for monitoring or protecting

your home, place of business or areas

you wish to observe;

+ Door entry

+ Safety of children

+ Car observation

+ Visitors to the premises

Please read and follow these instruction

/ operations so the instalation process

is quick and trouble free foryou.

Keep for future reference.

G T

Tools Required (Not Supplied)

1. 5mm masonry drill (If mounting

camera on a brick wall)

2. Long 12mm dia masonry drill

(If you plan to run camera through

the house wall) or a 12mm wood

bit (If you are drilling through the

wooden door surround)

3. Flexible sealant (To seal gaps

around drilled holes)

4. Small cross head screwdriver

5. Small hammer (To fix cable clips)

Quick set up installation

To satisfy your curiosity we suggest you dry run the connections of the component parts before you start to install the CCTV system.

Follow the diagram connections below.

Planning your system layout

Carefully plan where and how you will position the camera and the route the cable will

take to the television. Select a camera location that provides an unobstructed view of the

area you wish to monitor. The camera cable should be run directly indoors to provide the

maximum protection from being cut.

The cameras are weatherproof to IP45, however if you can protect the camera from the

extremes of weather, i.e. under a porch, then do so.

4 metre cable

Black & white or colour camera

Mains

adaptor

15m cable + Scart adaptor

Back ofTelevision

Scart socket

Change TV

station to AV

channel

Connection to TV

TV remote control

6 pin plug

Twist to point

downwards

and outwards

From camera

VCR

Connection via VCR

with scart socket

3. Mounting and installing the

camera system (continued)

1. Planning yoursystem layout

(continued)

Try not to position the camera so that

it is facing directly at the sun, as this will

affect the picture quality. Rememberthe

changing positions of the sun during

the year.

Note! Colour CCTV cameras have

limited picture visibility in the dark, even

Black and White cameras with infra-red

LED’s have a limited range of view at

night.

We recommend that you install an

outside incandescent 100W lamp ora

small PIR halogen security floodlight to

improve the ambient light and view seen

by the camera at night. We suggest you

install the CCTV system first and see if

the end result is sufficient to yourneeds

/ expectations.

Power jack lead connectors

7. Plug in the 6V350mA mains adaptor

to a 13A 230V mains socket.

Connect the jack plug from the

adaptorto the SCARTadaptor. Now

insert the SCART adaptor into the

SCART socket on yourTV.

8. Turn on the television and adaptor.

Change over the TV to the AV

channel.

8A.Using the TV remote you will be

able to see the camera view at any

time by pressing the AV button.

9. If you are unsure on how to do this

or which function key to press

consult yourTV user guide.

10. You should now be able to see the

camera picture, adjust the camera

view by moving the camera until

satisfied. Tighten the fixing screw

on the camera bracket.

6. Run the cable to the back of your

television, fixing into final position

as you go with the cable clips

supplied.

(Underno circumstances attempt to

cut the cable to remove any excess

you may have. Coil Neatly).

6A. If the SCARTsocket on yourTV/VCR

is being used by another appliance

then you will need to use a SCART

splitter to give yourself a spare

SCART socket for the CCTV camera.

2. Mounting and installing the

camera system

1. Use the bracket of the camera to mark

out locations above head height for

the masonry plugs. Mark a third

position for the cable

entry on a vertical

centre line between

and 15mm lower.

2. Drill all three holes and fit masonry

plugs supplied to the top two holes.

3. Thread the 4 metres of power

cable through the 12mm dia hole.

(Use a flexible sealant to seal any

gaps). Screw the camera to the

location chosen.

20mm

5mm dia

mm dia

15mm

4. Adjust the camera angle by twisting

the camera up / down and left / right

until you are covering the area to be

observed.

5. Inside the home now connect the

din connectors from the camera and

15 meter lead. The din pin plugs will

only locate in one position, however

care should be taken not to damage

the pins.

DOWN

RIGHT

LEFT

Problems Solution

Picture does not appear. Check that the mains powersupply

is Connected and switched on.

Check that the camera is correctly

Connected to the TV orVCR.

Check that all connections are

correctly made

Check that the TV AV channel has

been correctly selected.

Picture is very white Check that the camera is not

pointing at the Sun or any other

source of bright light.

Picture is too dark Add exterior lighting or move the

camera to cover an area with

increased illumination.

Picture is not level on TV Check the camera is level on

mounting bracket.

Squealing noise can be heard on TV This is electronic feedback and

means the camera is too near to

the television.

Remember your camera has one

way sound so you will be able to

hear on yourTV the sounds from

the camera location.

WARNING

It is an offence underlaw (Data

protection act 1998, Human rights

act 1998) to site a CCTV camera

where it intrudes upon a neighbours

right to privacy or where it overlooks

a public path / area. To stay within

the law for your own protection you

must display the CCTV in operation

sticker supplied, in a prominent

position.

Should you experience any difficulty

with this equipment then please

telephone the helpline provided;

GET SMART Helpline:

0870 6093059

Monday – Friday 9am – 5.30pm

Do not attempt to repairoropen any

part of the system yourself. Repairs

by unauthorised persons will

invalidate the guarantee.

GET products are subject to

continuous improvement, GET and

its subsidiaries reserve the right to

modify the product, design,

specification and prices without

notice or incurring any obligation.

This CCTV system can provide

valuable protection to yourhome or

property. However the camera or

any system linked to it cannot

guarantee protection against

burglary, vandalism or robbery.

The manufacturer, distributor, or

supplier will not be held responsible

forany loss or damage, which may

occur.

Accessories

Questions

Can I connect other makes of camera

to this system?

Can I connect this system to a VCR

A. How do I record the camera views

on my VCR?

B. Can I connect two cameras to

my TV?

Troubleshooting

Answers

No, only GETcameras and CCTV

equipment are compatible with this

system. (Please consult the GET

SMART helpline)

Yes, but theVCR will not automatically

record the cameras views.You will

have to set this up manually.

Select the channel on yourVCR that

is tuned into the CCTV system and

record as normal.

Yes. You will need to use a switched

multi-scart splitter.To view the camera

picture you will need to select the

switch / camera required on the

SCART splitter and change the TV

over to the AV channel.

WARNING

CCTV

Cameras are in

operation

GET PLC, Key Point 3 – 17 High Street,

Potters Bar, Herts. EN6 5AJ England.

GET SMART HELP LINE

TELEPHONE:

(0044)(0)870 609 3059

Scart splitter

GCCTV101555

Extension cable

GCCTV101310MXL 10 Metres

GCCTV101415MXL 15 Metres

G T

AR095-010605

This manual suits for next models

Other GET Security System manuals

GET

GET GCCTV1004BW User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual