GeoVision GV-SD2322-IR User manual

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual forfuture use. ISD2322IR-QG-A

Quick Start Guide

GV-SD2322-IR Speed Dome

Under the copyright laws, this manual may not be copied, in whole or in part, without the

written consent of GeoVision.

Every effort has been made to ensure that the information in this manual is accurate.

GeoVision, Inc. makes no expressed or implied warranty of any kind and assumes no

responsibility for errors or omissions. No liability is assumed for incidental or consequential

damages arising from the use of the information or products contained herein. Features and

specifications are subject to change without notice.

GeoVision, Inc.

9F, No. 246, Sec. 1, Neihu Rd.,

Neihu District, Taipei, Taiwan

Tel: +886-2-8797-8377

Fax: +886-2-8797-8335

http://www.geovision.com.tw

Trademarks used in this manual: GeoVision, the GeoVision logo and GV series products are

trademarks of GeoVision, Inc. Windows and Windows XP are registered trademarks of

Microsoft Corporation.

May 2016

Contents



Note for Connecting to GV-VMS / DVR / NVR......................................ii

Note for Recording...............................................................................iii

Note for Installing Camera Outdoor....................................................iv

1. Introduction ....................................................................................1

1.1 Packing List ........................................................................................................... 1

1.2 Optional Accessories ............................................................................................. 2

1.3 Overview................................................................................................................ 2

2. Installation ......................................................................................3

3. Connecting the Camera .................................................................6

4. Accessing the Camera ...................................................................8

4.1 Web Browser ......................................................................................................... 8

4.2 Looking Up the Dynamic IP Address...................................................................... 9

4.3 Configuring the IP Address ...................................................................................11

5. The WebInterface.........................................................................12

5.1 PTZ Control Panel ................................................................................................14

6. Upgrading System Firmware .......................................................17

7. Restoring to Factory Default........................................................18

7.1 Using the Web Interface .......................................................................................18

7.2 Directly on the Camera .........................................................................................19

Note for Connecting to GV-VMS / DVR / NVR

The GV-IP Speed Dome is designed to work with GV-VMS / DVR / NVR, a video management

system. Note the following when the camera is connected to GV-VMS / DVR / NVR:

1. By default, the images are recorded to the memory card inserted in the camera.

2. Once the camera is connected to the GV-VMS / DVR / NVR, the resolution set on the

GV-VMS / DVR / NVR will override the resolution set on the camera’s Web interface. You

can only change the resolution settings through the Web interface when the connection to

the GV-VMS / DVR / NVR is interrupted.

iii

Note for Recording

1. Mind the following when using a memory card for recording:

•Recorded data on the memory card can be damaged or lost if the data are accessed

while the camera is under physical shock, power interruption, memory card

detachment or when the memory card reaches the end of its lifespan. No guarantee is

provided for such causes.

•The stored data can be lost if the memory card is not accessed for a long period of

time. Back up your data periodically if you seldom access the memory card.

•Memory cards are expendable and their durability varies according to the conditions

of the installed site and how they are used. Back up your data regularly and replace

the memory card annually.

•To avoid power outage, it is highly suggested to apply a battery backup (UPS).

•For better performance, it is highly suggested to use Micro SD card of MLC NAND

flash, Class 10.

•Replace the memory card when its read/write speed is lower than 6 MB/s or when the

memory card is frequently undetected by the camera.

2. It is recommended to use memory cards of the following setting and specifications:

•Apply a battery backup (UPS) to avoid power outage.

•Use Micro SD card of MLC NAND flash, Class 10 for better performance.

Note for Installing Camera Outdoor

When installing the camera outdoor, be sure that:

1. The camera is set up above the junction box to prevent water from entering the camera

along the cables.

2. Any power, audio and I/O cables are waterproofed using waterproof silicon rubber or the

like.

3. The screws are tightened and the cover is in place after opening the camera cover.

Introduction

1. Introduction

Welcome to the GV-SD2322-IR Speed Dome Quick Start Guide. In the following sections, you

will learn the basic installations and configurations. For a detailed user manual, see the

GV-SD2322-IR Speed Dome User’s Manual on the Software DVD.

1.1 Packing List

•GV-SD2322-IR Speed Dome

•24V AC Power Adapter

•M4 Hex Key

•Waterproof Rubber Set

•Waterproof Requirements

•GV-IP Speed Dome Software DVD

•GV-Software DVD

•Warranty Card

1.2 Optional Accessories

Optional devices can expand the capabilities and versatility of your camera. Contact your

dealer for more information.

Name Details

GV-Mount Accessories The GV-Mount Accessories provides a comprehensive lineup

of accessories for installation on ceiling, wall and pole. For

details, see GV-Mount Accessories Installation Guide on the

software DVD.

1.3 Overview

No. Name Function

1. Default Button Resets all configurations to default factory settings. See 7.

Restoring to Factory Default.

2. Micro SD Card Slot Inserts a micro SD card (SD/SDHC, version 2.0, Class 10)

to store recording data.

Installation

2. Installation

You can separately purchase optional mounting accessories to mount GV-SD2322-IR on a

wall, ceiling or pole. Make sure the wall has enough strength to support the camera and the

mount. For details, see GV-Mount Accessories Installation Guide.

Below are the instructions for Wall Pendant Mount, which requires the accessory

GV-Mount210. The pendant tube and screws are not included in the standard packing list of

GV-SD2322-IR.

1. Unscrew the back cover of the camera.

2. Insert the micro SD card into the slot, and secure the back cover of the camera.

Note: Be sure to format the memory card on the camera’s Web interface (Setup > Storage

> Storage).

3. Place the pendant tube on the wall, and mark the position of the screw holes.

4. Drill holes on the wall, and secure the pendant tube to the wall with 4 self-prepared screws.

5. Attach the safety lock of the camera to the pendant tube.

6. Thread the data cable through the pendant tube.

Other manuals for GV-SD2322-IR

Table of contents

Other GeoVision Security Camera manuals

GeoVision

GeoVision GV-SD220 Series User manual

GeoVision

GeoVision GV-VD120D User manual

GeoVision

GeoVision GV-Hybrid LPR Camera 20R User manual

GeoVision

GeoVision GV-3D People Counter V2 User manual

GeoVision

GeoVision GV-IP User manual

GeoVision

GeoVision GV-ADR Series User manual

GeoVision

GeoVision GV-BL5311 Use and care manual

GeoVision

GeoVision GV-MFD1501 User manual

GeoVision

GeoVision GV-IP LPR-DL User manual

GeoVision

GeoVision GV-IP LPR Camera 5R User manual

GeoVision

GeoVision GV-GEB4900 User manual

GeoVision

GeoVision GV-EBD2702: GV-EBD4700 User manual

GeoVision

GeoVision GV-VD8700 User manual

GeoVision

GeoVision GV-FEC5302 User manual

GeoVision

GeoVision GV-BX2700 Series Use and care manual

GeoVision

GeoVision GV-BL8714 User manual

GeoVision

GeoVision GV-QFER12700 User manual

GeoVision

GeoVision GV-EFER3700 Series User manual

GeoVision

GeoVision GV-IRCAM Series User manual

GeoVision

GeoVision GV-TBL Series User manual

GeoVision

GeoVision GV-SD200 User manual

GeoVision

GeoVision GV-SD220 Series User manual

GeoVision

GeoVision GV-FD5300 User manual

GeoVision

GeoVision GV-SD220 Series Operator's manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications