GeoVision GV-IP Speed Dome User manual
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use. ISD220200-QG-D
Quick Start Guide
GV-IP Speed Dome
© 2014GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in
part, without the written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision, Inc. makes no expressed or implied warranty of any
kind and assumes no responsibility for errors or omissions. No liability is
assumed for incidental or consequential damages arising from the use of
the information or products contained herein. Features and specifications
are subject to change without notice.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: +886-2-8797-8377
Fax: +886-2-8797-8335
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV
series products are trademarks of GeoVision, Inc. Windows and Windows
XP are registered trademarks of Microsoft Corporation.
May2014
Contents
1. Introduction............................................................... 1
2.......................... 2
2
................................ 2
................................ 3
4
................................ 5
ount........... 5
Mount..................... 7
.............................. 10
11
...............................11
ng In................. 12
.............................. 14
.............................. 16
2.8 Configuring a Preset Position............................................... 18
2.9 Configuring a Sequence Route ............................................ 20
2.10 Configuring a Cruise .......................................................... 23
2.11 Configuring an Auto Pan..................................................... 24
2.12 Configuring a Tour.............................................................. 26
2.13 Upgrading System Firmware .............................................. 28
2.14 Restoring to Default Settings.............................................. 30
. GV-SD220 / SD220-S.......................
2.1 Packing List ...........................................................................
2.1.1 Indoor GV-IP Speed Dome...........
2.1.2 Outdoor GV-IP Speed Dome ........
2.2 Overview................................................................................
2.3 Installation..............................................
2.3.1 Indoor GV-IP Speed Dome: Hard-Ceiling M
2.3.2 Outdoor GV-IP Speed Dome: Wall
2.4 Connecting the Cables...........................
2.5 Accessing the Camera ..........................................................
2.5.1 System Requirements ..................
2.5.2 Looking Up the IP Address and Loggi
2.6 The Web Interface..................................
2.7 The PTZ Control Panel...........................
i
2.14.1 Restoring All the Settings.......................................... 30
30
ings Only............... 31
3. G 32
.............................. 32
.............................. 32
.............................. 33
.............................. 34
3.3 Installation............................................................................ 35
e Mount ................ 35
Pendent Mount..... 38
.............................. 40
.............................. 42
42
gging in.................. 43
3.6 The Web Interface................................................................ 45
3.7 The PTZ Control Panel......................................................... 46
3.8 Configuring a Preset Position............................................... 48
3.9 Configuring a Sequence Route ............................................ 50
3.10 Configuring a Cruise .......................................................... 53
3.11 Configuring an Auto Pan..................................................... 55
3.12 Configuring a Tour.............................................................. 57
2.14.2 Restoring System Settings Only ...............................
2.14.3 Restoring PTZ Configuration Sett
V-SD200 / SD200-S...............................................
3.1 Packing List ...........................................
3.1.1 Indoor GV-IP Speed Dome...........
3.1.2 Outdoor GV-IP Speed Dome ........
3.2 Overview................................................
3.3.1 Indoor Speed Dome Mount: Surfac
3.3.2 Outdoor Speed Dome Mount: Mini
3.4 Connecting the Cables...........................
3.5 Accessing the Camera ...........................
3.5.1 System Requirements ................................................
3.5.2 Looking up the IP Address and Lo
ii
iii
60
3.14 Restoring to Default Settings.............................................. 62
3.13 Upgrading System Firmware ..............................................
1. Intr
de. In the following
sections, you will be guided through the basic installations and
io V GV-SD200/GV-SD200-S.
led tion, ser’s Manual on the
re C
oduction
Welcome to the GV-IP Speed Dome Quick Start Gui
configurat ns of the G -SD220/GV-SD220-S/
see GV-IP Speed Dome UFor detai informa
Softwa D.
Model Application Description
GV-SD220 Indoor
GV-SD220-S Outdoor
2 MP H.264, 20x / 30x optical
zoom, 12x digital zoom, WDR Pro
GV-SD200 Indoor
GV-SD200-S Outdoor
2 MP H.264, 18x optical zoom, 8x
digital zoom, WDR Pro
2. GV-SD220 / SD220-S
2.1 Packing List
2.1.1 Indoor GV-IP Speed Dome
•Indoor GV-IP Speed Dome
•Hard-Ceiling Cover
te•Mounting Pla
•GV-IP Speed Dome
Software CD
•GV-NVR Software DVD
GV-SD220 / SD220-S
2
2.1.2 Outdoor GV-IP
•Outdoor GV-IP Speed Dome
Speed Dome
•Pendant Tube
•Hex Keys x 2
•M6 Screws x 3
•Desiccant pack x 4 •GV-IP Speed Dome
Software CD
•GV-NVR Software DVD
3
2.2 Overview
1
2
3
4
5
6
No. Name Description
1. e factory default values.
to Default Settings.
ault Restores all the settings to th
Def For details, see 2.13 Restoring
2. Status The status LED turns green when the power is on and
fades when the camera is ready for use.
3. Power The power LED turns green when the power is on.
4. ACT The ACT LED flashes orange light upon data
transmission.
5. Link The Link LED turns green with Internet connectivity.
6. Memory
Card Slot Insert a micro SD/SDHC card to store recording data.
4
GV-SD220 / SD220-S
2
2.3 Installation
There are multiple ways to install the GV-IP Speed Dome. Only the
standard installation methods are introduced in the Quick Start Guide. For
GV-SD220/220-S IP
Speed Dome, Chapter 5, GV-Mount Installation Guide on the Software CD.
2.3.1 Indoor GV-I eiling Mount
details on optional installations, see Installing the
P Speed Dome: Hard-C
Required Items
•Indoor packing (supplied)
•ceiling screws x 3 (user-prepared)
1. Secure the mounting plate to the ceiling with self-prepared screws.
5
Other manuals for GV-IP Speed Dome
1
This manual suits for next models
4
Table of contents
Other GeoVision Security Camera manuals
GeoVision
GeoVision GV-EBD2702: GV-EBD4700 User manual
GeoVision
GeoVision GV-IP SERIES User manual
GeoVision
GeoVision GV-TFD Series User manual
GeoVision
GeoVision GV-LPR CAM 10A User manual
GeoVision
GeoVision GV-IP Speed Dome User manual
GeoVision
GeoVision GV-IP User manual
GeoVision
GeoVision GV-BX110D User manual
GeoVision
GeoVision GV-BL5311 Use and care manual
GeoVision
GeoVision GV-QSD5730-Indoor User manual
GeoVision
GeoVision GV-MFD2401 User manual
GeoVision
GeoVision GV-OPAL S1 User manual
GeoVision
GeoVision GV-EBD4700 User manual
GeoVision
GeoVision GV-PFER12800 User manual
GeoVision
GeoVision 84-VD870000-001U User manual
GeoVision
GeoVision GV-BX2700 Series Use and care manual
GeoVision
GeoVision GV-GDR4900 User manual
GeoVision
GeoVision myGVcloud HCW120 User manual
GeoVision
GeoVision GV-SD220 Series User manual
GeoVision
GeoVision GV-VD120D User manual
GeoVision
GeoVision 84-FD34100-002U User manual
