Genius SP-HF2.0 500 User manual
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 1 of 15
SERVICE GUIDE
KYE SYSTEMS CORP.
SP-HF2.0 500
Version : 1.0
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 2 of 15
RevisionHistory
Version Date Change
1.0 11/08/2004
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 3 of 15
Table of Contents
Revision History …………………………………………………………………….2
Table of Contents ……………………………………………………………………3
Getting Started ………………………………………………………………………4
Conventions Used in this Guide ……………………………………….4
Safety Precautions ……………………………………………………..4
Chapter 1. How to Handle Defective Returns……………………………………..5
1.1 Overview …………………………………………………………..5
1.2 Problems …………………………………………………………...6
1.2.1 One or more channels no sound ………………..…7
1.2.2 Power LED (indicator) no light………………....…8
1.2.3 Volume , Bass no function...……………...………..8
Chapter 2. Specifications …………………………………………………………9
Chapter 3. Block Diagram ……………………………………………………….11
Chapter 4. Exploded View ……………………………………………………….12
Chapter 5. Part List ………………………………………………………………15
Chapter 6. Schematic Diagram …………………………………………………..17
Chapter 7. Important Notes ………………………………………………………19
7.1 Packing Requirement for Sending the PCB Assembly by Post …..19
7.2 Short of Spare Parts while Repairing a Speaker System …………19
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 4 of 15
Getting Started
Conventions Used in this Guide
Pay Special Attention : Instructions that are important to remember and
may prevent mistakes .
Caution : Information that, if not followed, may result in damage to the
product .
Safety Precautions
The following precautions should be observed in handling the speaker
Described in this guide :
Place the speakers on a flat, level and stable surface.
Do not place the speakers in environments subject to mist, smoke,
vibration, excessive dust, salty or greasy air, or other corrosive gases
and fumes.
Do not drop or jolt the speakers.
Do not allow anything to drop into the subwoofer case through its
ventilator, as it could result in fatal electric shock or fire .
Place the unit far enough from other equipments for good heat
dissipation .
Disconnect the AC power cord from the AC outlet before performing
any maintenance on the speakers .
Do not perform any maintenance with wet hand .
Prevent foreign substances, such as water, other liquids or chemicals ,
From entering the speakers while performing maintenance procedures
on the speakers .
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 5 of 15
Chapter 1. How to Handle Defective Returns
1.1 Overview
Verifying problems
Proceeding necessary tests
Receiving Defective speakers from
Customers
Analyzing possible malfunction
causes
Deciding & proceeding the
rectification methods
Replace necessary defective parts
Proceeding tests to
Ver if
y
if the s
p
eaker is
functionin
g
normall
y
Return the speakers with proper
repackaging to customers
Function NG
Function OK
Function OK
Function NG
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 6 of 15
1.2 Problems
Item Problem Description
1.2.1 One or more channels no sound
1.2.2 Power LED (indicator) no light
1.2.3 Volume , Bass no function
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 7 of 15
Attention
1.2.1 One or more channels no sound
Problem
Solutions
Please follow the numbered sequence marked within parenthesis given in individual
Flow chat, in that this is the best-recommended sequence to rectify the problems .
One or more channels no sound
Broken or short circuit
Defective IC1
Speaker cable dis-connect or
speaker damaged
Check solder points on
PCB
Check and Replace
defective IC
Re-connect speaker cable or
replace defective speaker(s)
Analyzer and
Identify the Causes
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 8 of 15
1.2.2 Power LED (indicator) no light
Problem
Solutions
1.2.3 Volume , Tone no function
Problem
Solutions
Power LED (indicator) no light
Power switch or LED defective
Defective,D1-4,
Dc cord of transformer
disconnected or defective
Re-solder or replace
defective component(s)
Analyzer and
Identify the Causes
Volume , Bass no function
Broken or short circuit
Defective C11-12,VR1,
VR2,R7-10,C5-6,C9-10
Check solder points on PCB
Analyzer and
Identify the Causes
Check and Replace defective
components
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 9 of 15
Chapter 2. Specifications
NO. Description Unit Specifications
1 Out Power at THD 10% W ≧7
2 Sensitivity mV 500 ±70
3 Freq. Response (Ref:-3dB) Hz 35Hz ~ 20KHz
4 Separation dB ≧40
5 S/N ratio dB ≧50
6 Hum & Noise Vol:max mV ≦ 10
ServiceGuide SP-HF2.0 500
Version : 1.0 Page 10 of 15
Chapter 3. Block Diagram
AUDIO IN
Vo l u m e
Control
Power
Amplifier
R.CH Speaker
AC IN
L.CH Speaker
Tone
Control
Power
Conditioner
Table of contents
Other Genius Speakers manuals
Genius
Genius SW-2.1 355 User manual
Genius
Genius SP-S110 User manual
Genius
Genius SP-HF1250B User manual
Genius
Genius SW-G2.I I000 User manual
Genius
Genius SW-2.1 300 User manual
Genius
Genius SP-HF1800A User manual
Genius
Genius SP-i201U User manual
Genius
Genius SW-5.1 1800 User manual
Genius
Genius GX Gaming SW-G2.I 2000 User manual
Genius
Genius SP-HF2.0 800 User manual
Genius
Genius LOOK 313 MEDIA User manual
Genius
Genius SP-i160 User manual
Genius
Genius SP-HF800A User manual
Genius
Genius SP-HF2800BT User manual
Genius
Genius SP-HF2020 User manual
Genius
Genius SW-HF5.1 1200 User manual
Genius
Genius SP-i160 User manual
Genius
Genius SP-HF385BT User manual
Genius
Genius SP-HF1800A Instruction manual
Genius
Genius SP-HF1100X User manual
