Gefen COMP-CAT5-148S User manual
1x8 Component
CAT-5 DA
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday PST
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
1x8 Component CAT5 DA is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
TABLE OF CONTENTS
Operation Notes
Introduction
Features
Sender Panel Descriptions
Receiver Panel Descriptions
Connecting and Operating the 1x8 Component CAT5 DA
How to Adjust the Picture
CAT5 Wiring Diagram
Specifications
Warranty
1
2
3
4
5
6
7
8
9
10
1
READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE 1X8 COMPONENT CAT5 DA SYSTEM
• Use industry standard Category-5 (CAT-5) cable to operate the 1x8 Component CAT5
DA system. CAT-5e cable is preferred.
• Please connect all the cables between the computer and the 1x8 Component CAT5 DA
system before powering up the 1x8 Component CAT5 DA Sender unit.
• The 1x8 Component CAT5 DA units are housed in a metal box for better RF shielding.
OPERATION NOTES
Congratulations on your purchase of the ex•tend•it 1x8 Component CAT5 Distribution
Amplifier. Your complete satisfaction is very important to us.
Gefen’s line of Home Theater switchers, extenders, and Distribution Amplifiers are de-
signed to make your A/V setup more comfortable, more productive and more affordable.
The 1x8 Component CAT5 DA allows one Component source to be distributed on up
to eight displays. The 1x8 Component CAT5 DA also extends Component signals over
330 feet using industry standard Category 5 (CAT-5) Cable. All output displays will have
mirrored images.
The ex•tend•it line offers solutions for home theater, A/V installation, data center, infor-
mation distribution, conference room presentation, school and corporate training envi-
ronments.
Our Commitment
Gefen will always offer the finest quality product at the best possible price. Included in
that price is a lifetime support from a team of outstanding engineers.
How it Works
Simply connect your Component video source to the 1x8 Component CAT5 Distribu-
tion Amplifier’s input using the supplied VGA to Component cable. Then connect up to
eight Component displays to the Component CAT5 receivers over 330 feet using CAT-5
Cable. Then power the 1x8 Component CAT5 Distribution Amplifier and the receivers
will get power from the CAT5. Note: Component output 1 is the primary connection and
is used for the main display. Component output 2 through 8 follow the main display. The
Component displays attached to the 1x8 Component CAT5 Distribution Amplifier MUST
have the same native resolution in order to get a picture.
INTRODUCTION
2
FEATURES
Features
• Distributes easily up to eight Component displays
• Extends each display up to 330 feet
• Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions
• Distributes and extends Component or VGA video signals
• Installs in seconds
Includes:
(1) 1x8 Component CAT5 DA
(1) 6’ VGA to Component cable
(1) 5V6A DC Power Supply
(1) Users Manual
3
SENDER PANEL DESCRIPTIONS
Connects to
5VDC power
supply
4
Video CAT5
Out 1-4 VGA to Component
Cable Input
Power LED
Video CAT5
Out 5-8
RECEIVER PANEL DESCRIPTIONS
5
Video
CAT5 In VGA to Component
Cable Out
Power
LED
EQ
Knob
CONNECTING AND OPERATING THE 1X8 COMPONENT CAT5 DA
How to Connect the 1x8 Component CAT5 DA to your devices
1 Connect the supplied VGAto Component cable from the Component video source into
the 1x8 Component CAT5 DASender "Comp In" port.
2Connect a CAT-5e* cable from the "CAT5 Video Outs" on the 1x8 Component CAT5
DA Sender to the "CAT5 Inputs" on the Component CAT5 Distribution Receiver. (Repeat
for each Receiver unit)
3 Connect the VGA to Component cable from the display to the "Comp Out" on the
Component CAT5 Distribution Receiver. (Repeat for each Receiver unit)
4 Plug the 5VDC power supply into the 1x8 Component CAT5 DA Sender.
6
HOW TO ADJUST THE PICTURE
7
The first step in adjusting the video quality is to display text and a graphic on your monitor
(i.e. desktop icons). Then set your computer to the resolution that you will be using most
frequently. The dip switches are used to set the focus and sharpness of the picture to the
best possible setting. Set the dip switches to the settings that are recommended for the
different lengths of CAT5 cable (see chart below). Verify that the picture quality is to your
satisfaction. If the recommended setting does not produce a great quality picture, try using
a different dip switch setting. The trim pod next to the Component connector on the 1x8
Component CAT5 DA R allows brightness adjustments for video.
0-25 Feet All dip switches OFF for all colors.
26-100 Feet Set dip switch #1 ON all colors. 2,3,4 remain OFF.
101-200 Feet Set dip switch #2 ON all colors. 1,3,4 remain OFF.
201-300 Feet Set dip switch #3 ON all colors. 1,2,4 remain OFF.
301 Feet and Up Set dip switch #4 ON all colors. 1,2,3 remain OFF.
NOTE: The dip switches are set to the OFF position when the switch is closest to the
number or in the down position.
This manual suits for next models
1
Table of contents
Other Gefen Extender manuals
Gefen
Gefen CAT5-5500HD User manual
Gefen
Gefen EXT-HDKVM-LAN User manual
Gefen
Gefen USB-400 User manual
Gefen
Gefen EXT-USB-400FON User manual
Gefen
Gefen CAT5-9000I User manual
Gefen
Gefen EXT-HDMIRS232-CAT5 User manual
Gefen
Gefen USB-2.0 User manual
Gefen
Gefen EXT-WHD-1080P-LR User manual
Gefen
Gefen USB 2.0 SR User manual
Gefen
Gefen RS-232 User manual
Gefen
Gefen GTV User manual
Gefen
Gefen VGARS232-141 User manual
Gefen
Gefen EXT-DVI-ELR User manual
Gefen
Gefen DVI-141DLB User manual
Gefen
Gefen CAT5-7000 User manual
Gefen
Gefen GTB-DVIKVM-ELR User manual
Gefen
Gefen Firewire 800 Extender Plus EXT-FW-1394BP User manual
Gefen
Gefen GTV-HDBT-CAT5 User manual
Gefen
Gefen EXT-HDMI1.3-141SBP User manual
Gefen
Gefen ex-tend-it CAT5-1000 User manual
