Gefen EXT-DVI-ELR User manual
®
DVI Extra Long Range
Extender
EXT-DVI-ELR
User Manual
www.gefen.com
ASKING FOR ASSISTANCE
Rev A2
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday, Pacific Time
Write To:
Gefen LLC
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen LLC reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
DVI Extra Long Range Extender is a trademark of Gefen, LLC
© 2011 Gefen LLC, All Rights Reserved.
All trademarks are the property of their respective owners.
CONTENTS
1 Introduction
2 Operation Notes
3 Features
4 Sender Unit Layout
5 Sender Unit Descriptions
6 Receiver Unit Layout
7 Receiver Unit Descriptions
8 Connecting and Operating the DVI Extra Long Range Extender
9 DIP Switch Configuration
12 Network Cable Wiring Diagram
13 Specifications
14 Warranty
1
Congratulations on your purchase of the Gefen DVI Extra Long Range Extender.
Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to install and simple to operate.
The Gefen DVI Extra Long Range Extender
The DVI Extra Long Range Extender over CAT-5 extends any DVI source to an
HD display or other digital signage application up to 330 feet (100 meters). This
product uses Gefen ELR technology, delivering uncompressed DVI video to
1920x1200 over a single CAT-5 cable, reducing cable costs and providing easier
installation.
How It Works
Place the DVI Extra Long Range Extender Sender Unit next to the DVI source.
Use the included DVI cable to connect the source to the Sender Unit. Connect
the Receiver Unit to the display with a DVI cable. Use one CAT-5 cable, up to
330 feet (100 meters), to connect the Sender to the Receiver Unit. Connect the
included locking power supplies to the Sender and Receiver Units, and then con-
nect both power cables to available electrical outlets.
INTRODUCTION
2
OPERATION NOTES
PLEASE READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI EXTRA LONG RANGE EXTENDER
• CAT-5 or CAT-6 cables should not exceed 330 feet (100 meters).
• Shielded (STP) CAT-5 or CAT-6 is recommended. However, un-shielded
(UTP) CAT-5 or CAT-6 is acceptable.
NOTE: The shielded cable has an advantage by providing immunity to
Electromagnetic Interference (EMI), cell phones and A/C motors.
• The Gefen DVI Extra Long Range Extender features the ability to generate
compatible EDID and Hot Plug signals when working with different brands of
source devices and monitors.
• This product does not support HDCP content with DVI.
3
FEATURES
Features
• Supports DVI Resolutions to 1920x1200@60 Hz or 1080p at 330 feet (100
meters)
• EDID Management for Local and Pass-through modes
• Power save mode
• Digital signal transmission over CAT-5 cable for zero signal loss
• Locking Power Supplies for secure connections
• Wall mountable
Package Includes
(1) Gefen DVI Extra Long Range Extender - Sender Unit
(1) Gefen DVI Extra Long Range Extender - Receiver Unit
(1) 6 ft. DVI Cable (M-M)
(2) 5V DC Locking Power Supplies
(1) User Manual
4
SENDER UNIT LAYOUT
Back
Front
2 3
1
4
5
SENDER UNIT DESCRIPTIONS
1 5 V DC Locking Power Connector
Connect the included 5 V DC locking power supply to this connector.
2 Power Indicator
This LED will turn bright blue once the included 5 V DC locking power supply
has been properly connected to the unit and the locking power supply has been
connected to an available electrical outlet.
3 DVI In
Connect a DVI cable from the computer to this DVI-I connector.
4 Link
Connects the Sender Unit to the Receiver Unit using CAT-5 / CAT-6 cable.
6
RECEIVER UNIT LAYOUT
Back
Front
3
4
21
7
RECEIVER UNIT DESCRIPTIONS
1 DVI Out
Connect a DVI display to this DVI-I connector.
2 Power Indicator
This LED will turn bright blue once the included 5 V DC locking power supply
has been properly connected to the unit and the locking power supply has been
connected to an available electrical outlet.
3 5 V DC Locking Power Connector
Connect the included 5 V DC locking power supply to this connector.
4 Link
Connects the Receiver Unit to the Sender Unit using CAT-5 / CAT-6 cable.
Other manuals for EXT-DVI-ELR
1
Table of contents
Other Gefen Extender manuals
Gefen
Gefen EXT-DVI-1CAT6 User manual
Gefen
Gefen ex-tend-it DVI Detective User manual
Gefen
Gefen USB-MIDI User manual
Gefen
Gefen EXT-DVI-CAT5-4X User manual
Gefen
Gefen CAT5-8500 User manual
Gefen
Gefen GTV-WVGA-LR User manual
Gefen
Gefen EXT-DIGAUD-141 User manual
Gefen
Gefen EXT-DVI-1CAT6-GI User manual
Gefen
Gefen GTB-HDKVM-ELR User manual
Gefen
Gefen EXT-WRS232 User manual
Gefen
Gefen GTV-WIRELESSHD User manual
Gefen
Gefen ex-tend-it CAT5-1500 User manual
Gefen
Gefen GTB-HDBT-POL-BLK User manual
Gefen
Gefen EXT-HDKVM-LAN User manual
Gefen
Gefen DVI Booster User manual
Gefen
Gefen EXT-WHD-1080P-SR-TX User manual
Gefen
Gefen HDMIRS232-CAT5 User manual
Gefen
Gefen USB-400FO User manual
Gefen
Gefen EXT-AUD -1000 User manual
Gefen
Gefen FW-1394B User manual
