GE AGV05 Operating instructions

Air Conditioners

Safety Instructions

Adapter Plugs . . . . . . . . . . . . . . . . .3

Connect Electricity . . . . . . . . . . . .2

Extension Cords . . . . . . . . . . . . . . .3

Safety Precautions . . . . . . . . . . .2, 3

Operating Instructions

Control knob models . . . . . . . .6, 7

Touch pad models . . . . . . . . . . .4, 5

Care and Cleaning

Air Filter . . . . . . . . . . . . . . . . . . . . .7

Front Grille and Case . . . . . . . . . .8

Outdoor Coils . . . . . . . . . . . . . . . .7

Installation Instructions . . .9–13

Troubleshooting Tips . . . . . . .14

Normal Operating Sounds . . . . .15

Consumer Support

Consumer Support . . .Back Cover

Product Registration . . . . . . .17, 18

Warranty . . . . . . . . . . . . . . . . . . . .19

3828A20060R 49-7412-1 01-01 JR

AGV05 – 5,200 BTU models

AGD06 – 6,000 BTU models

Owner’s Manual and

Installation Instructions

www.GEAppliances.com

Room

Write the model and serial numbers here:

Model # __________________________

Serial # __________________________

Find these numbers on a label on the

side of the air conditioner.

Consumer Support Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock

or personal injury.

■Use this appliance only for its intended

purpose as described in this Owner’s

Manual.

■This air conditioner must be properly

installed in accordance with the Installation

Instructions before it is used.

■Never unplug your air conditioner by pulling

on the power cord. Always grip plug firmly

and pull straight out from the receptacle.

■Repair or replace immediately all electric

service cords that have become frayed or

otherwise damaged. Do not use a cord that

shows cracks or abrasion damage along its

length or at either the plug or connector end.

■Turn the mode control to

OFF

and unplug

your air conditioner before making any

repairs or cleaning.

NOTE:

We strongly recommend that any

servicing be performed by a qualified

individual.

■For your safety…do not store or use

combustible materials, gasoline or other

flammable vapors or liquids in the vicinity

of this or any other appliance.

SAFETY PRECAUTIONS

Do not, under any circumstances, cut or remove

the third (ground) prong from the power cord. For

personal safety, this appliance must be properly

grounded.

The power cord of this appliance is equipped

with a 3-prong (grounding) plug which mates

with a standard 3-prong (grounding) wall

outlet to minimize the possibility of electric

shock hazard from this appliance.

Have the wall outlet and circuit checked by a

qualified electrician to make sure the outlet is

properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation

to have it replaced with a properly grounded

3-prong wall outlet.

The air conditioner should always be

plugged into its own individual electrical

outlet which has a voltage rating that matches

the rating plate.

This provides the best performance and also

prevents overloading house wiring circuits

which could cause a fire hazard from

overheated wires.

See the Installation Instructions,

Electrical

Requirements

section for specific electrical

connection requirements.

HOW TO CONNECT ELECTRICITY

Consumer SupportTroubleshooting Tips

Operating Instructions

Safety Instructions Installation Instructions

www.GEAppliances.com

WARNING!

Because of potential safety hazards under certain

conditions, we strongly recommend against the

use of an extension cord.

However, if you must use an extension cord,

it is absolutely necessary that it be a UL-listed,

14 gauge, 3-wire grounding type appliance

extension cord having a grounding type plug

and outlet and that the electrical rating of the

cord be 15 amperes (minimum) and 125 volts.

CAUTION:

DO NOT use an extension cord with any of

the 230/208 volt models.

USE OF EXTENSION CORDS –

115-Volt models only

Because of potential safety hazards under certain

conditions, we strongly recommend against the use

of an adapter plug.

However, if you must use an adapter, where

local codes permit, a

temporary connection

may

be made to a properly grounded 2-prong wall

outlet by use of a UL-listed adapter available at

most local hardware stores.

The larger slot in the adapter must be aligned

with the larger slot in the wall outlet to provide

proper polarity in the connection of the power

cord.

When disconnecting the power cord from the

adapter, always hold the adapter in place with

one hand while pulling the power cord plug

with the other hand. If this is not done, the

adapter ground terminal is very likely to break

with repeated use.

If the adapter ground terminal breaks,

DO NOT

USE

the air conditioner until a proper ground

has been established.

Attaching the adapter ground terminal to a wall outlet

cover screw does not ground the appliance unless the

cover screw is metal, and not insulated, and the wall

outlet is grounded through the house wiring. You should

have the circuit checked by a qualified electrician to

make sure the outlet is properly grounded.

USE OF ADAPTER PLUGS –

115-Volt models only

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

Consumer Support Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

■ To ensure proper operation, aim the remote

control at the signal receiver on the air

conditioner.

■ The remote control signal has a range of

up to 21 feet.

■ Make sure nothing is between the air conditioner

and the remote control that could block the

signal.

■ Make sure batteries are fresh and installed

correctly–see the

Care and Cleaning

section.

About the controls on the air conditioner–models with touch pads.

Features and appearance will vary.

Air Conditioner Controls Remote Control

Controls

ON/OFF Pad

Turns air conditioner on and off.

Display

Shows the set temperature or time remaining

on timer.

MODE

Use to set the air conditioner to

COOL

FAN

mode.

Increase

▲

/Decrease

▼

Pads

Use to set temperature when in

COOL

mode.

FAN Pad

Use to set the fan speed to

LOW (F1), MED (F2)

HIGH (F3).

TIMER Pad

ON–

When the air conditioner is off, it can be

set to automatically come on in 1 to 12 hours

at its previous setting. Each touch will set the

timer in hours.

OFF–

When the air conditioner is on, it can be

set to automatically turn off in 1 to 12 hours.

Each touch will set the timer in hours. After

the timer has been on for 30 minutes, the

temperature will automatically rise 2°F, and

after another 30 minutes, it will automatically

rise 2°F again. The temperature will then stay

the same until the timer goes

OFF

To cancel the timer, press the

TIMER

pad

until the display time disappears.

Remote Control Signal Receiver

Remote Control

www.GEAppliances.com

When the air conditioner is turned on, it will

automatically start in the last cool and fan

settings used.

Lights next to the touch pads on the air conditioner

control panel indicate the selected settings.

COOL Mode

Use the

COOL

mode with

HIGH (F3), MED (F2)

LOW (F1)

fan for cooling. Use the

INCREASE

▲

DECREASE

▼ pads to set the desired temperature

between 60°F and 86°F in 1°F increments.

A thermostat is used to maintain the room

temperature. The compressor will cycle on and off

to keep the room at the set level of comfort. Set the

thermostat at a lower number and the indoor air

will become cooler. Set the thermostat at a higher

number and the indoor air will become warmer.

NOTE: If the air conditioner is off and is then turned on

while set to COOL, it will take approximately 3 minutes

for the compressor to start and cooling to begin.

Cooling Descriptions

For Normal Cooling–

Select the

COOL

mode and

HIGH (F3)

MED (F2)

fan with a middle set

temperature.

For Maximum Cooling–

Select the

COOL

mode

and

HIGH (F3)

fan with a lower set temperature.

For Quieter & Nighttime Cooling–

Select the

COOL

mode and

LOW (F1)

fan with a middle set

temperature.

NOTE: If you switch from a COOL setting to OFF or to

a fan setting, wait at least 3 minutes before switching

back to a COOL setting.

FAN Mode

Use the

FAN

HIGH (F3), MED (F2)

LOW (F1)

provide air circulation and filtering without cooling.

Since fan only settings do not provide cooling,

a temperature setting will not be displayed.

Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions

Air Direction

Fingertip pressure on the louvers lets you control

the air direction left, right, straight ahead or any

combination of these directions.

Additional controls and important information.

About the controls on the air conditioner–models with control knobs.

Features and appearance will vary.

Controls

Mode Control

HI COOL , MED COOL

and

LO COOL

provide

cooling with different fan speeds.

HI FAN

and

LO FAN

provide air circulation and

filtering without cooling.

NOTE: If you move the mode control from a cool

setting to OFF or to a fan setting, wait at least 3

minutes before switching back to a cool setting.

Cooling Descriptions

For Normal Cooling

—Select

HI COOL

MED COOL

with the temp control at midpoint.

For Maximum Cooling

—Select

HI COOL

with the

temp control at the highest number available

on your knob.

For Quieter & Nighttime Cooling

—Select

LO COOL

with the temp control at midpoint.

Temp Control

The temp control is used to maintain the

room temperature. The compressor will cycle

on and off to keep the room at the same level

of comfort. When you turn the knob to a

higher number the indoor air will become

cooler. Turn the knob to a lower number and

the indoor air will become warmer.

MODE

Your model will have one of the above type controls.

TEMP

Your model will have one of the above type controls.

OFF

FAN

COOL

FAN

COOL

OFF

FAN

MED

COOL

FAN

COOL

Consumer Support Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

The air filter behind the front grille should be

checked and cleaned at least every 30 days or

more often if necessary.

Clean the filter with warm, soapy water. Rinse and

let the filter dry before replacing it.

CAUTION: DO NOT operate the air conditioner without a

filter because dirt and lint will clog it and reduce performance.

To remove (on some models):

Grasp the tab and gently pull the filter up and out.

To remove (on some models):

Open the inlet grille downward by pulling out

the upper corners of the inlet grille.

Using the tab, push down on the filter to release

it and pull it out.

Consumer SupportTroubleshooting Tips

Operating InstructionsSafety Instructions Installation Instructions

Care and cleaning of the air conditioner.

Air Direction

Fingertip pressure on the louvers lets you control

the air direction left, right, straight ahead or any

combination of these directions.

www.GEAppliances.com

Additional controls and important information.

Outdoor Coils

The coils on the outdoor side of the air conditioner

should be checked regularly. If they are clogged

with dirt or soot they may be professionally steam

cleaned, a service available through your GE

service outlet.

Filter

tab

Grasp

corner

Grasp

corner

Air Filter

Front Grille and Case

Turn the air conditioner off and remove the plug

from the wall outlet before cleaning.

To clean, use water and a mild detergent. Do not

use bleach or abrasives.

To remove the front grille:

Remove the knobs. Then remove the screw

beneath the bottom knob. Press in on the lower

left side of the case and pull the grille forward.

Gently press inward on the right side of the

case and pull the lower right side of the grille

forward to release from the slot.

Lift the top of the grille up and off to release

from the tabs.

To replace the grille:

Hook the front of the grille onto the tabs

on the top of the case.

Snap the bottom right side of the grille into

the case slot.

Snap the bottom left side of the grille into

the case slot and replace the screw. Attach

the knobs.

Care and cleaning of the air conditioner.

Consumer Support Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

Consumer SupportTroubleshooting Tips

Operating InstructionsSafety Instructions Installation Instructions

Preparing to install the air conditioner.

Read these instructions completely and carefully.

NOTE TO INSTALLER: Leave these instructions with

the air conditioner after installation is completed.

NOTE TO CONSUMER: Keep this Owner’s Manual

and Installation Instructions for future use.

IMPORTANT NOTES:

For personal safety, this air conditioner must be

properly grounded.

It is important to have the wall outlet and circuit

checked by a qualified electrician if there is any

doubt as to whether a proper ground exists.

Follow National Electric Codes (NEC) and/or local

codes and ordinances.

CAUTION:

Do not, under any circumstances, cut or

remove the third (ground) prong from the

power cord.

Do not change the plug on the power cord

of this air conditioner.

Aluminum house wiring may present

special problems—consult a qualified

electrician.

Before You Begin

These models require 115/120-volt a.c.,

60 Hz grounded outlet protected with

a 15-amp time delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the

possibility of electric shock hazard. If the wall outlet

you plan to use is only a 2-prong outlet, it is your

responsibility to have it replaced with a properly

grounded 3-prong wall outlet.

Electrical Requirements

■Phillips head screwdriver

■Flat blade screwdriver

■Ruler or tape measure

■Scissors

■Pencil

■Level

Tools You Will Need

Window Installation Instructions

Parts Included

Air conditioner

Window sash seal

Safety brackets (3)Type A (4) Type B (11)

Foam top window gasket

Top mounting rail

Sliding panels

Consumer Support Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

This manual suits for next models

Table of contents

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual