Ganz BC-IR3.6N User manual

PRODUCT FEATURES

1. Selection of 420 and 520TV resolution and low light performance surveillance

camera with a built-in 1/3 type CCD

2. Integrated 3.6mm fixed lens

3. Outstanding 0.15/0.30 lux performance with built-in 24 LEDs.

4. Photocell activates IR light at night.

5. Compact and light weight

6. Designed for indoor or outdoor use

SAFETY PRECAUTIONS

OUTDOOR IR COLOR CAMERA

MODEL: BC-IR3.6N / BCH-IR3.6N

5. The installation should be made

by qualified service engineers

and should conform to all local

codes.

6. To prevent fire or electric shock,

do not expose the camera to rain

or moisture.

7. To prevent fire or electric shock,

UL listed wiring should be used

for the DC 12V input.

8. Use only DC 12V regulated

power supply marked class 2.

9. Never attempt to disassemble or

modify the camera.

1. Be sure to connect each lead to the

appropriate terminal. Wrong

connection may cause damage to

the camera.

2. Do not attempt to aim the camera

at the sun or other extremely

bright objects.

3. Do not allow the camera to be

subject to unstable location, strong

shocks and vibration, and strong

electromagnetic field.

4. If any abnormality occurs,

immediately turn off the power

and consult your dealer.

INSTALLATION

1. Use the supplied three screws to attach the bracket to wall. Drill a hole in advance on the proper

position of the wall for the Power and Video Cable to pass through later.

2. Remove the Joint Lock from the bracket by turning it counterclockwise. Then, screw the Joint Lock

to the backside of the camera (turn clockwise)*.

* There are two screw holes on the backside of the camera. Please choose the proper one which best

suits your installation environment. If the upper screw hole is chosen, it’s recommended to push the

Sun Shield a little bit toward the direction of the lens for easy installation.

3. Screw the camera with the Joint Lock connected to the bracket. Adjust the camera angle and the

Sun Shield position. After that, secure the Joint Lock to fix. Then, pass the Power and Video Cable

through the hole drilled in Step 1 to hide it.

CONNECTION

1. Video Output Connector (VIDEO OUT)

Connect the camera video output and the monitor

video input with 75Ωcoaxial cable.

2. DC12V Input Terminal

Connect the power terminal of the camera to a 12V

DC regulated power supply.

Note: Please use the correct power adaptor, DC12V

(regulated), to operate this unit. The power

tolerance of this unit is DC12V ± 10%. Over

maximum DC 12V power input will damage this unit.

Joint Lock

Sun Shield

Power and Video Cable

SPECIFICATIONS

Model Name BC-IR3.6N BCH-IR3.6N

TV System NTSC

Scanning system 2 : 1 Interlace

Image Sensor 1/3"-Type Interline transfer CCD

Effective Elements 512(H) x 492(V) 771(H) x 492(V)

Scanning Frequency 15.734kHz(H) x 59.94Hz(V)

Video output 1.0Vp-p /75Ω

Horizontal resolution More than 420 TVL More than 520 TVL

Minimum Illuminance 0.15 Lux / F2.0, 0 Lux (15 meter IR ON) 0.3Lux / F2.0, 0Lux (IR ON)

S/N ratio More than 48 dB (AGC OFF)

Gamma characteristic 0.45

IR Illumination 24 IR LEDs

Sync. System Internal only

Electronic Shutter 1/60 sec. ～1/100K sec.

White balance ATW

Power Supply 12V DC±10%

Power consumption 1.2 Watt (IR OFF)/4.2 Watt(IR ON)

mbient temperature

Operation : 0°C to +40°C (14deg F to 122 deg F) /

Storage : -20°C to +60°C (-4 deg F to 140 deg F)

mbient humidity(No condensing) Operation : Max. 85%RH / Storage : Max. 95%RH

IP Rating IP67

External dimensions 100mm(L) x 65mm(W) x 63.8mm(H)

Weight 320g

IR camera with a power and video cable * 1

User Manual x 1

Bracket x 1

ccessories

Wall Plug and Screw x 3

LENS SPECIFICATIONS

Max. aperture ratio 1 : 2.0

Focal Length 3.6mm

Iris F2.0

D 92.6°

H 76.1

Angle of view (Wide to Tele)

V 58.4

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) This device

must accept any interference received, including interference that may cause undesired

operation.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a

product it means the product is covered by the European

Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of

separately from the municipal waste stream via designated

collection facilities appointed by the government or the local

authorities.

3. The correct disposal of your old appliance will help prevent

potential negative consequences for the environment and

human health.

4. For more detailed information about disposal of your old

appliance, please contact your city office, waste disposal

service or the shop where you purchased the product.

This manual suits for next models

Table of contents

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications