Furuno FE-700 User manual

NAVIGATIONAL ECHO SOUNDER

700

OPE

ANUA

www.furuno.co.jp

The

erusedinthismanual

iselementalchlorinefree.

・FURUNOAuthorizedDistributor/Dealer

9‑52Ashihara‑cho,

Nishinomiya,662‑8580,JAPAN

Telephone: +81‑(0)798‑65‑2111

Fax

+81‑(0)798‑65‑4200

A : JAN 2000

PrintedinJapan

Allrightsreserved.

T : JUL . 27,2009

Pub.No. OME‑23660‑T

*00080890817**00080890817*

(HIMA ) FE‑700

00080890817

*00080890817*

Ni-Cd Pb

IMPORTANT NOTICES

General

• The operator of this equipment must read and follow the descriptions in this manual. Wrong

operation or maintenance can cancel the warranty or cause injury.

• Do not copy any part of this manual without written permission from FURUNO.

• If this manual is lost or worn, contact your dealer about replacement.

• The contents of this manual and equipment specifications can change without notice.

• The example screens (or illustrations) shown in this manual can be different from the

screens you see on your display. The screens you see depend on your system

configuration and equipment settings.

• Save this manual for future reference.

• Any modification of the equipment (including software) by persons not authorized by

FURUNO will cancel the warranty.

• All brand and product names are trademarks, registered trademarks or service marks of

their respective holders.

How to discard this product

Discard this product according to local regulations for the disposal of industrial waste. For disposal in

the USA, see the homepage of the Electronics Industries Alliance (http://www.eiae.org/) for the correct

method of disposal.

How to discard a used battery

Some FURUNO products have a battery(ies). To see if your product has a battery(ies), see the chapter

on Maintenance. Follow the instructions below if a battery(ies) is used.

In the European Union

The crossed-out trash can symbol indicates that all types of batteries

must not be discarded in standard trash, or at a trash site. Take the

used batteries to a battery collection site according to your national

legislation and the Batteries Directive 2006/66/EU.

In the USA

The Mobius loop symbol (three chasing arrows) indicates that Ni-Cd and

lead-acid rechargeable batteries must be recycled. Take the used

batteries to a battery collection site according to local laws.

In the other countries

There are no international standards for the battery recycle symbol. The number of symbols can

increase when the other countries make their own recycling symbols in the future.

SAFETY INSTRUCTIONS

Do not power the equipment when the

transducer is in air.

The transducer may become damaged.

The TFT LCD is constructed using the

latest LCD techniques, and displays

99.99% of its pixels. The remaining 0.01%

of the pixels may drop out or blink, how-

ever this is not an indication of malfunc-

tion.

About the TFT LCD

WARNING

Immediately turn off the power at the

switchboard if water leaks into the

equipment.

Continued use of the equipment can cause

fire or electrical shock. Contact a FURUNO

agent for service.

Do not disassemble or modify the

equipment.

Fire, electrical shock or serious injury can

result.

Immediately turn off the power at the

switchboard if the equipment is emitting

smoke or fire.

Continued use of the equipment can cause

fire or electrical shock. Contact a FURUNO

agent for service.

Make sure no rain or water splash leaks

into the equipment.

Fire or electrical shock can result if water

leaks in the equipment.

Use the proper fuse.

Use of a wrong fuse can result in equipment

damage and void the warranty.

ELECTRICAL SHOCK HAZARD

Do not open the equipment.

Only qualified personnel

should work inside the

equipment.

WARNING LABEL

A warning label is attached to the equip-

ment. Do not remove the label. If the

label is missing or illegible, contact

a FURUNO agent or dealer.

WARNING

To avoid electrical shock, do not

remove cover. No user-serviceable

parts inside.

Name: Warning Label (1)

Type: 86-003-1011-1

Code No.: 100-236-231

CAUTION

iii

AWord to FE-700 Owners.............................iv

Features.........................................................iv

1.1 Control Description.................................1

1.2 Indications, Markers...............................2

1.3 Turning On/Off........................................3

1.4 Tone and Brilliance.................................3

1.5 Panel Dimmer.........................................3

1.6 Display Mode..........................................4

1.7 Range Scale...........................................7

1.8 Gain Control ...........................................7

1.9 Automatic Operation...............................7

1.10 Picture Colors .....................................7

1.11 Shallow Depth Alarm............................8

1.12 Draft......................................................8

2.1 Menu Overview ......................................9

2.2 Suppressing Low Level Noise .............9

2.3 Suppressing Interference.......................9

2.4 Picture Advance ...................................10

2.5 Trend....................................................10

2.6 Interval..................................................10

2.7 Choosing the Transducer.....................10

3.1 System Menu ....................................... 11

3.2 System Menu 1 ....................................12

3.3 System Menu 2 .................................... 12

3.4 System Menu 3 .................................... 13

4.1 Demonstration Display......................... 14

4.2 Bottom Level ........................................ 14

4.3 TVG Level ............................................ 15

4.4 Echo Offset........................................... 15

5.1 Basic Operation..................................... 16

5.2 Menu Operation.................................. 17

5.3 Diagnosis............................................ 18

5.4 Factory Setting.................................... 18

6.1 Checking .............................................. 19

6.2 Cleaning the Display Unit..................... 19

6.3 Transducer Maintenance ..................... 19

6.4 Replacing the Fuse, Battery................. 19

6.5 Troubleshooting.................................... 20

6.6 Diagnostic Test..................................... 21

6.7 Test Pattern.......................................... 21

6.8 Clearing the Memory............................ 22

Thank you for purchasing this navigational echo

sounder. We are confident you will discover why

FURUNO has become synonymous with uality

and reliability.

Dedicated in the design and manufacture of

marine electronics e uipment for over 60 years,

FURUNO Electric Company has gained an

unrivaled reputation as a world leader in the

industry. This is the result of our technical

e cellence as well as our worldwide distribution

and service network.

Please carefully read and follow the safety

information and operating and maintenance

instructions set forth in this manual before

attempting to operate the e uipment and

conduct any maintenance. our navigational

echo sounder will perform to the utmost of its

ability only if it is operated and maintained in

accordance with the correct procedures.

This e uipment is designed, produced and

documented by FURUNO ELECTRIC CO., LTD.,

complying with ISO 9001 standards as certified

by the Lloyd s Register of ualityAssurance

System.

The FURUNO FE-700 is comprised of display

unit and transducer unit. Echo sounding data is

displayed on the bright 6.5-inch color TFT Thin

Film Transistor LCD display.

The main features of the FE-700 are

1. Complies with the IMO and ISO standards

MSC.74 69 Anne 4 and ISO9875.

2. Cost-effective no paper, no consumables

high accuracy and high reliability - no rotating

gears and belts as in the paper echo

sounders

3. igh-contrast 6.5-inch color LCD display

featuring a wide viewing angle and adustable

brightness.

4. Wide variety of modes with never-get-lost

default position.

5.Automatic function permits unattended

ad ustment of range, gain, and pulselength.

The range scale and gain automatically

change to display the bottom.

6. Position, course, speed, time are repeated

from the e ternal devices.

7.Alarms shallow water, bottom lost, power

drop

8. The dual fre uency display can be shown by

using the optional matching bo MB-1200.

DISTRIBUTION

BOX

FE-702

DISPLAY UNIT

FE-701

JUNCTION BOX

JISF8821-1M0 0-20A3P

MATCHING BOX

MB-502 (for 50B-6B)

MB-504 (for 200B-8B)

IEC 61162-1

EIA-232C

IEC 61162-1 Navigation Device

Navigation Device

Personal Computer

IEC 61162-1

TRANSDUCER

SWITCH BOX

EX-8

DIGITAL DEPTH

INDICATOR

FE-720

CONTACT CLOSURE Alarm Unit

AU-12

: Standard Supply

100/110-115/

200/220-230 VAC

24 VDC

: Optional Supply

Terminal Box

DS-802

: Local Supply

DISTRIBUTION

BOX

MB-1200

TRANSDUCER

50B-6B,

200B-8B

FE-700 system configuration

The FE-700 uses ultrasonic pulses to detect the seabed and other underwater obects. The display unit

contains all basic electric circuits and logic processor. Electrical pulses are converted into acoustical

energy in the transducer fitted on the ships hull. The processor measures the time of pulses travelling

between the seabed and transducer and displays the water depths in the graphical form or other forms.

The transducers have a specific beam width with respect to their working fre uency, 50 k or 200 k .

The high fre uency has a narrow beamwidth and is immune to aeration when the ship is going astern or in

rough weather. The low fre uency has a wide beamwidth and more powerful sounding capability.

FURUNO

FE-700

E2366S01T

1.1 Transmit fre uency 50 k , 200 k , or 50/200 k alternating transmit

1.2 Output power 600 Wrms

1.3 Beam width 50B-6B 50 k 35 , 200B-8B 200 k 6

1.4 Basic display range Range

Unit 1 2 3 4 5 6 7 8

Meter 5 10 20 40 100 200 400 800

Feet 15 30 60 120 300 600 1500 2500

Fathom 3 5 10 20 50 100 200 400

Default settings it could be customi ed for use w/o range 3 and 6.

1.4 Accuracy 2.5 on any range

1.5 Minimum range 0.5 m 200 k , 2.0 m 50 k

1.6 Draft 0 to 30 m in 0.1 m steps, default 0 m

1.7 Pulse repetition rate PRR

Depth m P/L ms PRR pulse/min

5, 10, 20 0.25 750

40 0.38 375

100 1.00 150

200 2.00 75

400,800 3.60 42

2.1 Graphical display 6.5-inch color TFT LCD, 320 234 pi els

2.2 Echo colors 8 colors or 8 level monochrome

2.3 Display area 133 97 mm

2.4 Display mode

NAV Basic echo presentation with the depth below transducer or keel

DBS Echo presentation with the depth below sea surface

ISTR istorical Echo presentation with the depth

LOGBOO Echo presentation with the pop-up table showing

Time, Depth and L/L data memori ed at preset interval

OS DATA Echo presentation with the pop-up table of present

navigational data L/L , course , speed , time, depth

ELP Echo presentation with the help menu and note

MENU Echo presentation with the user menu

2.5 Picture advance speed

Slow mode 15 minutes or more

Fast mode Picture advance range

Range m 5 10 20 40 100 200 400 800

Interval min. 1.8 8 20 30

2.6 User setting Gain, Range, Alarm, Draft, Brilliance, Dimmer, Color, Auto

2.7 Auto set mode Gain, range and clutter will be automatically ad usted.

2.8 Alarm Shallow water default 20 m , Bottom lost, Power drop

2.9 Logbook display Depth, Internal clock, L/L

FURUNO

FE-700

E2366S01T

1 hour at 5 sec Interval, 12 hours at 1 minute interval and 24

hours at 2 minutes interval

E ternal navigational sensor re uired.

3.1 Display 4.5-inch monochrome LCD

3.2 Depth indication . m less than 100m , m 100 m or more

4.1 Serial input data IEC61162-1, current loop 1 port

RMA L/L, Ground track speed, Track

RMC L/L GPS , Ground track speed, Track, Time

GGA/GLL L/L

VTG Ground track speed, Track true/magnetic selected on menu

DA Time

4.2 Serial output data IEC61162-1, output period 1 sec. 3 outputs/ 1 port

SDDPT Depth m , Draft m

SDDBT Depth ft, m, fa below transducer

SDDB Depth ft, m, fa below keel

SDDBS Depth ft, m, fa below sea surface

4.3 Serial I/O data RS-232C, 1 port

Output Depth, Clock, L/L, Ship s speed, Course

Input Control command for PC

4.4 Alarm Depth, Power Contact closure signal, normal open or normal close,

250 VAC/ 200 VDC, 3A ma .

5.1 Distribution bo FE-720 100/110-115/200/220-230 VAC 0.2 A ma ., 1 phase, 50/60 or

24 VDC 0.6 A

5.2 Digital depth indicator 24 VDC, 0.15A

6.1 Temperature -15 C to 55 C

6.2 Relative humidity 93 at 40 C

6.3 Degree of protection

Display unit, Digital depth indicator IP 5

Distribution bo , Matching bo IP 2

6.4 Vibration IEC 60945

6.5 EMC IEC 60945

7.1 Display unit Panel N3.0, Chassis 2.5G 5/1.5 fi ed

7.2 Digital depth indicator Panel N3.0, Chassis 2.5G 5/1.5 fi ed

7.3 Distribution bo FE-720 2.5G 5/1.5 or 7.5BG7/2

7.4 Distribution bo MB-1200 N3.0

7.5 Matching bo 2.5G7/2 fi ed





  23(5$7,21

 &RQWURO'HVFULSWLRQ

$OORSHUDWLRQRIWKH)(LVFDUULHGRXWZLWKWKHFRQWUROVRQWKHIURQWSDQHORIWKHGLVSOD\XQLW5RWDU\

FRQWUROVUHVSRQGLPPHGLDWHO\WR\RXUFRPPDQGEXWVRPHWRXFKNH\VUHTXLUHWKHVXFFHVVL HRSHUDWLRQ



•



Other manuals for FE-700

Table of contents

Popular Sonar manuals by other brands

Kongsberg

Kongsberg Simrad SP90 Series manual

Eagle

Eagle TriFinder 2 Installation and operation instructions

Lowrance

Lowrance X-70A Installation and operation instructions

Lowrance

Lowrance LMS-150 GPS Installation and operation instructions

Simrad

Simrad EQ 55 Operator's manual

Lowrance

Lowrance Traditional Installation

Teledyne

Teledyne BlueView BV3200 user manual

Reson

Reson SeaBat 7125 SV2 Operator's manual

Eagle

Eagle 101 install guide

IMAGENEX

IMAGENEX 881A-GS manual

Eagle

Eagle Z-15 installation instructions

Simrad

Simrad SH80 - REV C installation manual

Simrad

Simrad ST90 Harbour Acceptance Test

Hawk

Hawk Sultan manual

Lowrance

Lowrance 1240A Installation and operation instructions

Kongsberg

Kongsberg Flexview quick start

VEXILAR

VEXILAR 107 PRO Operation manual

Klein

Klein 5000 V2 Series Operation and maintenance manual