Furuno FSV25 User manual

www.furuno.com

ll brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Installation Manual

COLOR SCANNING SONAR

Model FSV-25/FSV-25S

SAFETY INSTRUCTIONS ........................i

SYSTEM CONFIGURATION ..................iii

EQUIPMENT LISTS................................iv

1. HOW TO INSTALL THE SYSTEM ..1-1

1.1 Hull Unit (FSV-253/FSV-254)..............1-1

1.2 Processor Unit (FSV-2503/FSV-2503S)

............................................................1-7

1.3 Control Unit (FSV-2501) .....................1-9

1.4 Transceiver Unit (FSV-251) ..............1-12

1.5 Power Supply Unit (FSV-252)...........1-14

1.6 IF (Interface) Unit (FSV-8502) ..........1-15

1.7 Junction Box (FSV-2550)..................1-15

1.8 Raise/Lower Control Box (FSV-2530)

..........................................................1-15

1.9 Control Box Extension Box (FSV-2560)

..........................................................1-16

1.10 Attachment Flange (Option)..............1-17

1.11 Remote Controller (FSV-2504) .........1-18

2. WIRING............................................2-1

2.1 How to Connect the Units ...................2-1

2.2 Processor Unit ....................................2-2

2.3 IF Unit .................................................2-5

2.4 Control Unit and Remote Controller....2-7

2.5 Transceiver Unit..................................2-9

2.6 Junction Box .....................................2-11

2.7 Raise/Lower Control Box ..................2-12

2.8 Power Supply Unit ............................2-13

2.9 Control Box Extension Box ...............2-15

3. POST INSTALLATION SETTINGS .3-1

3.1 How to Set the Language ...................3-1

3.2 How to Set Up the Transducer............3-3

3.3 Hull Unit Checks .................................3-4

3.4 How to Access the System Menu .......3-8

3.5 How to Adjust the Heading .................3-9

3.6 How to Configure the Own Ship Mark

..........................................................3-10

3.7 How to Set Up a Secondary Monitor.3-10

3.8 Other System Menu Items ................3-11

APPENDIX 1 JIS CABLE GUIDE.....AP-1

APPENDIX 2

FRP TANK INSTALLATION .............AP-2

PACKING LISTS ................................. A-1

OUTLINE DRAWINGS ........................ D-1

INTERCONNECTION DIAGRAM........ S-1

The paper used in this manual

is elemental chlorine free.

・FURUNO Authorized Distributor/Dealer

9 52 Ashihara cho,

Nishinomiya, 662 8580, JAPAN

MAY

2014

Printed in Japan

DEC

09, 2016

Pub. No.

IME-13440-E

(

TAYA

)

FSV-25 25S

0 0 0 1 7 8 7 7 3 1 4

SAFETY INSTRUCTIONS

The installer must read the safety instructions before attempting to install the equipment.

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

DANGER

WARNING

CAUTION

Warning, Caution Prohibitive Action Mandatory Action

WARNING

DANGER

Keep away from raise/lower

shaft in hull unit when it is

moving.

Gears will cause serious injury.

WARNING

Do not open the equipment unless

totally familiar with electrical circuits

and service manual.

High voltage exists inside the equipment,

and a residual charge remains in capacitors

several minutes after the power is turned

off. Improper handling can result in

electrical shock.

Do not install the equipment where it

may get wet from rain or water splash.

Water can cause fire or electrical shock, or

damage the equipment.

Be sure no water leaks in at the hull

unit.

Water leakage can sink the vessel. Also

confirm that the transducer will not loosen

by ship's vibration. The installer of the

equipment is solely responsible for the

proper installation of the equipment.

FURUNO will assume no responsibility for

any damage associated with improper

installation.

Install the specified transducer tank

in accordance with the installation

instructions. If a different tank is to be

installed the shipyard is solely respon-

sible for its installation, and it should

be installed so the hull will not be

damaged if an object strikes the tank.

The tank or hull may be damaged if the

tank strikes an object.

Turn off power at the switchboard before

starting the installation.

Electrical shock or fire can result if the

the power is left on.

Make sure the drive shaft brake and

motor brake are functioning normally

before moving the transducer manually.

Do not remove the hull unit brake.

There is a risk of the shaft falling out.

SAFETY INSTRUCTIONS

Observe the following compass safe

distances to prevent interference to a

magnetic compass:

CAUTION

WARNING

If a steel tank is installed on a wooden

or FRP vessel, take appropriate

measures to prevent electrolytic

corrosion.

Electrolytic corrosion can damage the

hull.

Be sure to power each unit with proper

voltage.

Connection of an improper power supply

can cause fire or damage the equipment.

When checking the break on the hull

unit, always take measures against

static electricity.

Static electricity can cause the unit to

move unexpectedly, which can result in

personal injury to damage to unit.

Maximum speed while the transducer is

projected or being raised or lowered

is as below, to prevent damage to the

transducer.

Ground the equipment to prevent

electrical shock and mutual

interference.

1.45 mProcessor Unit

Control Unit

FSV-2501

Standard

compass

Steering

compass

0.90 m

0.35 m 0.30 m

IF Unit

0.90 m 0.55 m

Confirm there are no foreign objects on

the connecting cable terminals.

Foreign objects may cause the hull unit to

move unintententionally.

Sub Control Unit

FSV-853

0.80 m 0.50 m

Projected Raising/

Lowering

1100 to 1300

1100 or less

Over 1300

Max. 18 kn

Max. 20 kn

Max. 16 kn

Max. 13.5 kn

Max. 14.5 kn

Max. 12 kn

Projected length

(mm)

iii

SYSTEM CONFIGURATION

200-220 VAC,

3ø, 50/60 Hz

External

monitor

External

monitor

Processor unit

FSV-2503 (FSV-25)

FSV-2503S (FSV-25S)

External USB devices

NMEA IEC61162-1 device

Junction box FI-5002

External speaker

Sub control unit

FSV-853

Control unit

FSV-2501

Remote controller

FSV-2504

Remote controller

FSV-2504

Raise/Lower

control box*

FSV-2530

Junction box

FSV-2550

12-24 VDC

Rectifier

RU-1746B-2

100/110/115/

220/230 VAC

1ø, 50/60 Hz

100/110/115/

220/230 VAC

1ø, 50/60 Hz

Interface unit

FSV-8502

Transceiver unit

FSV-251

Power supply

unit

FSV-252

* The raise/lower control box can be installed within a 5 m radius of the hull

unit where normal operation is not feasible. Use the optional Control Box

Extension Box (FSV-2560) to extend the distance between the units.

Hull unit

FSV-253

(1200mm travel)

FSV-254

(1600mm travel)

EQUIPMENT LISTS

Standard supply

Name Type Code No. Qty Remarks

Control unit FSV-2501 - 1 Includes cable for control unit

(5 m/10 m)

Interface unit FSV-8502 - 1

Processor unit FSV-2503 - 1 For FSV-25

Processor unit FSV-2503S - 1 For FSV-25S

Transceiver unit FSV-251 - 1

Power supply unit FSV-252 - 1

Junction box FSV-2550 - 1 Includes cable (5m/10 m/20 m)

Hull unit FSV-253 - 1For 1200 travel

FSV-254 - For 1600 travel

Installation

materials

CP10-07200 000-017-257 1For Control unit, includes

CP10-07201 and CP03-33202

CP10-07300 000-017-123 1For Interface unit, includes

CP10-07301 and cables

CP19-00600 000-011-664 1For Processor unit, includes

CP19-00601

CP10-09300 000-027-169 1 For Transceiver unit

CP10-07701 001-267-450 1 For Power supply unit

CP10-09400 001-406-770 1 Cabling for Junction box (5 m)

CP10-07800 001-267-540 Cabling for Junction box (10 m)

CP10-07900 001-267-550 Cabling for Junction box (20 m)

CP10-08220 000-029-313 1 Cabling for Hull unit (5 m)

CP10-08200 000-025-104 Cabling for Hull unit (10 m)

CP10-08210 000-029-312 Cabling for Hull unit (20 m)

CP10-08300 000-025-069 1For Hull unit, includes

CP10-08101, CP10-08301

Spare parts SP19-00501 001-023-090 1 For Processor unit

SP10-03901 001-268-990 1 For Transceiver unit

SP10-04201 001-269-280 1 For Hull unit

EQUIPMENT LISTS

Optional supply

Name Type Code No. Remarks

Control unit FSV-2501 - Includes cable for control unit (5

m/10 m)

Sub control unit FSV-853 000-019-212

Rectifier unit RU-1746B-2 000-030-439

Remote controller FSV-2504 - Includes installation materials:

CP10-07401

Retraction tank OP10-40 001-269-630 For steel-hull vessels

Attachment kit OP10-24 006-943-530

Attachment flange OP10-42 001-269-580 150 mm

OP10-38 001-269-590 200 mm

OP10-39 001-269-600 250 mm

OP10-43 001-269-610 280 mm

OP10-44 001-269-620 315 mm

Fixing materials OP10-9 006-990-040 For remote controller

Flush mount kit FP03-09870 008-535-630

Junction box FI-5002 000-010-765 For processing NMEA signals to

navigational equipment

Control box exten-

sion box

FSV-2560 000-025-105 For remote installation of control

box

E/S cable VV-S0.3X8C *6M* 001-257-220 6 m

Cable assembly MJ-A7SPF0007-050C 000-154-028 NMEA cable

10CA10053 001-408-440 For transceiver (5 m)

001-269-570 For transceiver (20 m)

Cabling 10S2380 001-169-330 10 m

001-169-340 20 m

001-169-350 30 m

001-169-360 40 m

001-169-370 50 m

001-169-380 60 m

001-169-390 100 m

Installation materials CP03-28900 000-082-658 LAN cable (10 m)

CP03-28910 000-082-659 LAN cable (20 m)

CP03-28920 000-082-660 LAN cable (30 m)

CP03-28930 000-084-368 LAN cable (50 m)

CP03-28940 000-090-429 LAN cable (100 m)

EQUIPMENT LISTS

This page is intentionally left blank.

1-1

1. HOW TO INSTALL THE SYSTEM

1.1 Hull Unit (FSV-253/FSV-254)

Note 1: The raise/lower control box on the hull unit contains a motion sensor. Handle

the hull unit carefully.

Note 2: Handle the transducer carefully. Rough handling can damage its sensitive

components.

1.1.1 Installation considerations

Decide the location of the hull unit through consultation with the dockyard and ship

owner. When deciding the location, the following points should be taken into account.

• Select an area where propeller noise, cruising noise, air bubbles and interference

from turbulence are at a minimum. Generally, the point at 1/3 to 1/2 of the ship's

length from the bow on the keel is optimum. On-the-keel installation is

advantageous for minimizing oil consumption. For large ships with deep draft, the hull

unit can be installed at the bow, along the keel line. (See figure below for reference).

• For installations where there are other transducer tanks along the keel, install the hull

unit a minimum distance of three times the internal diameter of the tank directly in

front (bow direction) of the hull unit. Failure to install the hull unit with sufficient

spacing can result in excessive vibrations caused by turbulence, which can damage

the hull unit. (See figure above for reference).

• Select a place where the hull bottom is flat and the draft is sufficiently deep.

Normally, the transducer should protrude at least 500 mm beyond the keel to

minimize the effect of air foam and bubbles.

• Select a place where interference from other transducers is minimal. The hull unit

should be at least 2.5 m away from the transducers of other equipment.

• No obstacle should be in the fore direction since it causes a shadow zone and

aerated water, resulting in poor sonar performance.

• The physical distance between the hull unit and the transceiver unit should be no

more than 5 m.

• In the case of a bilge keel, select a location as far from the bilge as possible, but no

more than 5 m from the transceiver unit.

• Select a location away from indents and protrusions on the hull, especially indents,

as they can create noise interference and cause poor sonar performance.

• The space shown in the figure on the next page is required around the hull unit for

wiring and maintenance.

• If the ambient temperature around the unit will be below 0°C, provide the sonar

compartment with a heater to keep the temperature above 0°C.

1/2

1/3

Mounting range øD

Tank installation spacing Bow

or larger

1. HOW TO INSTALL THE SYSTEM

1-2

Note 1: After you install the hull unit,

make sure you install anti-vibration stays.

(See "How to install the stays (anti-vibra-

tion and anti-shock

measures)" on page 1-6.)

Note 2: Prepare a secure and firm safety

fence for the hull unit, to prevent acciden-

tal injury from the moving hull unit. The

safety fence should be easily removable

for maintenance and allow room for the

connected cables to swing freely with

pitch, roll and heave. The raise/lower con-

trol unit and emergency buttom should be

installed and operatable from outside the

safety fence.

1.1.2 How to shorten the retraction tank

The following table provides cutting guidelines for shortening the tank. Refer also to

the retraction tank installation drawing at the back of this manual.

Note 1: The default length for the retraction

tank is 1300 mm. By removing only 88 mm

fromtheretractiontank,youcaneliminatethe

need for limit switch adjustment.

Note 2: For both 1200 mm and1600 mm trav-

el hull units, the transducer will not fully re-

tract unless the tank is shortened by more

than 90 mm.

Stroke Cutting guidelines

1200 mm 100 to 110 mm

1600 mm 0 to 110 mm

Bow direction

6501300

1300650

Compartment

(Safety fence)

1162

686

(Recommended length)

1212

1300

(Retraction tank full length)

Other manuals for FSV25

This manual suits for next models

Table of contents

Popular Sonar manuals by other brands

Kongsberg

Kongsberg Simrad SP90 Series manual

Eagle

Eagle TriFinder 2 Installation and operation instructions

Lowrance

Lowrance X-70A Installation and operation instructions

Lowrance

Lowrance LMS-150 GPS Installation and operation instructions

Simrad

Simrad EQ 55 Operator's manual

Lowrance

Lowrance Traditional Installation

Teledyne

Teledyne BlueView BV3200 user manual

Reson

Reson SeaBat 7125 SV2 Operator's manual

Eagle

Eagle 101 install guide

IMAGENEX

IMAGENEX 881A-GS manual

Eagle

Eagle Z-15 installation instructions

Simrad

Simrad SH80 - REV C installation manual

Simrad

Simrad ST90 Harbour Acceptance Test

Hawk

Hawk Sultan manual

Lowrance

Lowrance 1240A Installation and operation instructions

Kongsberg

Kongsberg Flexview quick start

VEXILAR

VEXILAR 107 PRO Operation manual

Klein

Klein 5000 V2 Series Operation and maintenance manual