Fujitsu SE700 User manual

Edition June 2015

English

SE700 / SE500 / SE300

Additive Components

FUJITSU Server BS2000

Operating Manual

Comments…Suggestions…Corrections…

The User Documentation Department would like to know your

opinion on this manual. Your feedback helps us to optimize our

documentation to suit your individual needs.

Feel free to send us your comments by e-mail to:

manuals@ts.fujitsu.com

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system which

complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

This manual is printed

on paper treated with

chlorine-free bleach.

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

The Xen® mark is a trademark of Citrix Systems, Inc., which manages the mark on behalf of the Xen open source

community. The Xen® mark is registered with the U.S. Patent and Trademark Office, and may also be registered in

other countries.

Novell and SUSE are registered brands of Novell, Inc. in the USA and other countries.

Linux is a registered brand of Linus Torvalds.

Windows® is a registered trademark of Microsoft Corporation.

The Linux-based basic software M2000, X2000, and HNC which is installed on the Management Unit,

Server Unit x86, and HNC contains Open Source Software. The licenses for this can be found in the LICENSES

directory on the relevant installation DVD

U41861-J-Z126-1-76

Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

29. Juni 2015 Stand 16:52.14 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.ivz

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2 Application Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1 Application Unit AU47 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.1.1 Front of the Application Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.1.1.1 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.1.1.2 Indicators on the operator control panel . . . . . . . . . . . . . . . . . . . . . 13

2.1.1.3 Indicators on the operable drives/components . . . . . . . . . . . . . . . . . . . 14

2.1.1.4 Hard disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.1.2 Rear of the Application Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.2 Switching an Application Unit on/off . . . . . . . . . . . . . . . . . . . . . . . . 22

2.3 Operating system and other software . . . . . . . . . . . . . . . . . . . . . . . . 22

2.4 System operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3 Port extension (Net Unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4 Periphery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.1 ETERNUS JX40 disk storage system . . . . . . . . . . . . . . . . . . . . . . . . 28

4.1.1 Indicator elements (front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.1.2 Operating and indicator elements (rear) . . . . . . . . . . . . . . . . . . . . . . . . 31

4.1.3 Problem Solutions and Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Contents

U41861-J-Z126-1-76

4.2 ETERNUS LT40 S2 tape library . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.2.1 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4.2.2 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

4.2.3 Operating the tape library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

4.2.3.1 Operating panel on the device . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

4.2.3.2 Remote Management Unit (RMU) . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.2.4 Magazines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

4.2.4.1 Removing and replacing a magazine using the OCP . . . . . . . . . . . . . . . . 45

4.2.4.2 Removing and replacing a magazine using the RMU . . . . . . . . . . . . . . . . 46

4.2.4.3 Inserting tape cartridges Into a magazine . . . . . . . . . . . . . . . . . . . . . . 46

4.2.4.4 Mailslots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

4.2.5 LTO tape cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

4.2.6 Working with the tape library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

4.2.6.1 Modes of the tape library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

4.2.6.2 Device settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

4.2.7 Error handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

4.2.7.1 Removing stuck tapes from slots . . . . . . . . . . . . . . . . . . . . . . . . . . 56

4.2.7.2 Tape library error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

U41861-J-Z126-1-76 5

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k01

1 Introduction

The FUJITSU Server BS2000 SE Series unites the existing server lines S servers and SQ

servers in the server line SE servers.

Depending on requirements, the SE server contains all the system components needed for

operation as an overall application:

– /390-based BS2000 Server Unit

– x86-based Server Units with BS2000, Linux or Windows guest systems

– x86-based Application Units for operation under Linux, Windows or VMware

– Shareable tape and disk periphery

– A high-speed, server-internal infrastructure to connect the components with each other

and with the customer LAN or SAN.

The SE700 / SE500 / SE300 Operating Manual, which consists of a number of modules,

describes the features and hardware components of the FUJITSU Server BS2000 of the

SE Series. Users should read the operating manuals carefully in order to obtain optimal

performance from the SE server.

This manual describes the optional hardware components such as Application Unit,

redundant Net Unit and peripheral devices, thus complementing the Basic Operating

Manual [1]. You will find a comprehensive introductory chapter in the Basic Operating

Manual . The chapters "Important notes" chapter on SE server operation and "Environ-

mental protection and service" are contained only in the Basic Operating Manual .

6 U41861-J-Z126-1-76

U41861-J-Z126-1-76 7

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03

2 Application Unit

In addition to the Server Unit, up to 20 autonomous high-end x86-64 servers, which are

known as Application Units, can also be installed and operated in the rack of the SE server.

Application Units are particularly suitable for important corporate applications. They offer a

high degree of data security and availability through highly-developed hardware and

software components. Their structure (two or four Intel processors of the XEON E7 family)

and their scalability enable them to be employed for a large number of customer applica-

tions, e.g. for medium-sized or large databases, for ERP systems and for subapplications

which interwork with a BS2000 application on the Server Unit.

In comparison to guest systems on XenVMs in an SU x86, further operating systems can

be operated on the Application Unit, and the selection of configured components is greater.

The operating systems and the customer applications on the Application Unit run indepen-

dently of the Server Unit.

The following operating systems can be used for Application Units:

●SUSE Linux Enterprise Server 11 (SLES 11, 64-bit)

●RedHat Enterprise Linux 6.5 and 7

●Windows Server 2008 R2, 2012 and 2012 R2

●VMware vSphere 5.1 and 5.5

●Microsoft Windows Hyper-V Server 2008 R2 and higher

If you want to use other operating systems or virtualization techniques, please contact

Customer Support.

It is the responsibility of the customer to configure the Application Units, and also to

installand operate his/her own software on the Application Units, see the “Operation and

Administration” manual [5].

Application Unit

8 U41861-J-Z126-1-76

Application Units are integrated into the service concept of the SE server, e.g. into remote

service via the MU and into administration with the SE Manager. The following functions are

offered for Application Units in the SE Manager:

●Status display of the Application Unit

●Display and configuration of the links to the web interfaces of the applications on the

Application Unit

●Remote powering on of the Application Units using the iRMC

●Integration into AIS Connect (remote service)

●Storage Management functions via the add-on pack StorMan

Detailed information on this subject is provided in the "Operation and Administration"

manual [5].

An Application Unit occupies four height units (HUs) in the rack.

Up to 20 Application Units can be installed and operated in the rack or extension rack.

Application Unit Application Unit AU47

U41861-J-Z126-1-76 9

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03

2.1 Application Unit AU47

AU47s are set up on the same system unit as the PRIMERGY servers RX4770 M<x> and

use the same system board. Differences in the basic units exist to permit integration of the

Application Units into the SE server and to enhance the SE server’s redundancy features.

In the event of questions, e.g. regarding application compatibility, the information for the

PRIMERGY servers RX4770 M<x> also applies for the Application Units of the SE server.

Security functions in the BIOS setup and on the system board protect the data against

manipulation. Information on the security functions in the BIOS is provided in the "D3342

BIOS Setup Utility for FUJITSU Server PRIMERGY RX4770 M1“

(http://manuals.ts.fujitsu.com under the heading Industry standard servers).

iAt present the current model of the PRIMERGY server RX4770 M1 provides the

hardware basis for AU47. When an innovation of the PRIMERGY server takes

place in future, the newer variants will be released as the hardware basis for AU47,

e.g. an RX4770 M2.

Features

Application Units contain two or four Intel XEON processors, have a storage capacity of up

to 6 TB and offer ten PCI express slots.

Detailed information on the various hardware components and interfaces of the Application

Units is provided in the data sheet "FUJITSU Server BS2000 SE Series". See the product

site for the relevant server at http://www.fujitsu.com/uk:

ÊGo to Products →Servers →BS2000 →FUJITSU Server BS2000 and select SE700,

SE500 or SE300.

Application Unit AU47 Application Unit

10 U41861-J-Z126-1-76

2.1.1 Front of the Application Unit

Figure 1: Server Unit (front)

1 ID card (green) 5 Video port

2 ServerView Local Service Display 6 3x USB ports

3 Optical drive activity indicator 7 HDD indicators;

8 slots for 2.5" HDDs

4 Operator control panel (for further details see

figure 2 on page 11)

8 SSD indicators;

4 slots for SSDs

햲 햳 햴 햵햶햷

햸

햹

Other manuals for SE700

This manual suits for next models

Table of contents

Other Fujitsu Server manuals

Fujitsu

Fujitsu PRIMERGY TX100 S1 User manual

Fujitsu

Fujitsu Primergy RX100 S5 Guide

Fujitsu

Fujitsu Supercomputer PRIMEHPC FX700 Installation instructions

Fujitsu

Fujitsu SPARC Enterprise M3000 Service manual

Fujitsu

Fujitsu PRIMERGY DX920 S3 Manual

Fujitsu

Fujitsu PRIMERGY RX200 S3 User manual

Fujitsu

Fujitsu T2555SC020IN User manual

Fujitsu

Fujitsu PRIMERGY RX300 S8 User manual

Fujitsu

Fujitsu PRIMERGY RX300 S5 Owner's manual

Fujitsu

Fujitsu PRIMERGY RX2520 M5 User manual

Fujitsu

Fujitsu PRIMERGY TX600 S3 Owner's manual

Fujitsu

Fujitsu PRIMERGY TX300 S7 User guide

Fujitsu

Fujitsu Primergy RX100 S3 User manual

Fujitsu

Fujitsu B23Q8WD-G-01-J Installation instructions

Fujitsu

Fujitsu PRIMERGY CX400 M1 User guide

Fujitsu

Fujitsu PRIMEQUEST 480 Guide

Fujitsu

Fujitsu Primepower200 User manual

Fujitsu

Fujitsu PRIMERGY RX2520 M4 User manual

Fujitsu

Fujitsu SPARC Enterprise M8000 User manual

Fujitsu

Fujitsu PRIMERGY RX1330 M3 User manual

Fujitsu

Fujitsu SPARC Enterprise T5120 Installation guide

Fujitsu

Fujitsu BS2000 SE320 User manual

Fujitsu

Fujitsu PRIMERGY BX900 S1 Owner's manual

Fujitsu

Fujitsu PRIMERGY TX2550 M4 User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started