Fujitsu PRIMERGY TX300 S6 User manual

Options Guide - English

PRIMERGY TX300 S6 Server

Options Guide

Edition August 2010

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

email: [email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

TX300 S6 Options Guide

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the product

is used in a hot environment. The customer shall bear the cost of replacing

replaceable components which have exceeded their operating life. Note that

these are only guidelines, and do not constitute a guarantee of trouble-free

operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

OptionsGuide TX300 S6

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance control

in weapons systems (hereafter, "high safety use"). Customers should not use

this product for high safety use unless measures are in place for ensuring the

level of safety demanded of such use. Please consult the sales staff of Fujitsu if

intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

TX300 S6 Options Guide

Only for the Japanese market:

I Although described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– USB Flash Module (UFM)

– CSS (Customer Self Service)

OptionsGuide TX300 S6

TX300 S6 Options Guide

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.1 Concept and target groups . . . . . . . . . . . . . . . . . . 12

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 12

1.3 Expansions and conversions . . . . . . . . . . . . . . . . . 14

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 16

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 19

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.1 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 28

4.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 28

4.1.2 Removing the front cover . . . . . . . . . . . . . . . . . . . . 29

4.1.3 Removing the server feet . . . . . . . . . . . . . . . . . . . . 31

4.2 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

4.2.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 32

4.2.2 Removing the rack front cover . . . . . . . . . . . . . . . . . . 34

4.3 Removing the fan carrier . . . . . . . . . . . . . . . . . . . . 35

5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.1 Memory modules . . . . . . . . . . . . . . . . . . . . . . . . 38

5.2 Expanding the main memory . . . . . . . . . . . . . . . . . 40

OptionsGuide TX300 S6

Contents

6 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

6.1 Installing a second processor . . . . . . . . . . . . . . . . . 42

6.2 Replacing the processor . . . . . . . . . . . . . . . . . . . . 47

6.3 Replacing the heat sink . . . . . . . . . . . . . . . . . . . . . 52

7 Accessible drives and LSD/LSP . . . . . . . . . . . . . . . . 53

7.1 Equipping of the bays . . . . . . . . . . . . . . . . . . . . . . 54

7.2 Accessible 5.25-inch drive . . . . . . . . . . . . . . . . . . . 56

7.2.1 Removing the dummy cover . . . . . . . . . . . . . . . . . . . 56

7.2.2 Installing an accessible 5.25-inch drive . . . . . . . . . . . . . . 58

7.3 Multibay 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

7.3.1 Equipping Multibay 1 . . . . . . . . . . . . . . . . . . . . . . . 59

7.3.1.1 Installing LSP or LSD . . . . . . . . . . . . . . . . . . . . . 59

7.3.1.2 Installing a slimline DVD drive . . . . . . . . . . . . . . . . . 61

7.3.2 Installing Multibay 1 . . . . . . . . . . . . . . . . . . . . . . . . 64

7.4 HDD extension box . . . . . . . . . . . . . . . . . . . . . . . 68

7.4.1 Multibay 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

7.4.1.1 Installing Multibay 2 . . . . . . . . . . . . . . . . . . . . . . 70

7.4.2 2.5-inch HDD extension box . . . . . . . . . . . . . . . . . . . 72

7.4.2.1 Installing 2.5 inch HDD extension box . . . . . . . . . . . . . 73

8 Expansion cards and BBU . . . . . . . . . . . . . . . . . . . 75

8.1 Installing expansion cards . . . . . . . . . . . . . . . . . . . 76

8.2 Installing a BBU . . . . . . . . . . . . . . . . . . . . . . . . . 79

9 Further options . . . . . . . . . . . . . . . . . . . . . . . . . 93

9.1 TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

9.2 USB Flash Module (UFM) . . . . . . . . . . . . . . . . . . . . 96

10 Conversion from a floorstand model to a rack model . . . . . 99

TX300 S6 Options Guide

Contents

11 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

11.1 Installing the fan carrier . . . . . . . . . . . . . . . . . . . . 105

11.2 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 107

11.2.1 Mounting the server feet . . . . . . . . . . . . . . . . . . . . . 107

11.2.2 Attaching the front cover . . . . . . . . . . . . . . . . . . . . . 108

11.2.3 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 110

11.3 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

11.3.1 Attaching the rack front cover . . . . . . . . . . . . . . . . . . 111

11.3.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 112

12 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

12.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

OptionsGuide TX300 S6

Contents

Table of contents

Other Fujitsu Server manuals

Fujitsu

Fujitsu PRIMERGY TX1330 M4 User manual

Fujitsu

Fujitsu SPARC Enterprise T5140 User manual

Fujitsu

Fujitsu PRIMERGY RX100 S8 User manual

Fujitsu

Fujitsu PRIMERGY 300 User manual

Fujitsu

Fujitsu PRIMEQUEST 480 Technical manual

Fujitsu

Fujitsu PRIMERGY CX2550 M1 User manual

Fujitsu

Fujitsu SPARC Enterprise T2000 User manual

Fujitsu

Fujitsu PRIMERGY TX200 S5 User manual

Fujitsu

Fujitsu S540 User manual

Fujitsu

Fujitsu PRIMERGY TX150 S7 User manual

Fujitsu

Fujitsu SPARC M10-4 User manual

Fujitsu

Fujitsu Primergy CX270 S2 User manual

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service manual

Fujitsu

Fujitsu PRIMERGY BX620 S5 User manual

Fujitsu

Fujitsu Primepower200 User manual

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service manual

Fujitsu

Fujitsu PRIMERGY CX2560 M4 User manual

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Owner's manual

Fujitsu

Fujitsu Primergy TX300 S4 User manual

Fujitsu

Fujitsu PRIMERGY RX2530 M4 User manual

Fujitsu

Fujitsu PRIMERGY BX900 User manual

Fujitsu

Fujitsu PRIMEPOWER900 User manual

Fujitsu

Fujitsu PRIMERGY CX120 S1 Owner's manual

Fujitsu

Fujitsu PRIMERGY RX1330 M3 User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started