Fujitsu PRIMERGY TX1330 M4 User manual

FUJITSU Server PRIMERGY TX1330 M4

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

04/2022

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to ISO 9001 and ISO 27001

To ensure high quality and information security standards while creating documentation, the

quality management system and information security management system of cognitas are

certified in compliance with ISO 9001 and ISO 27001.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de/en/

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

TX1330 M4 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual TX1330 M4

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

TX1330 M4 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 11/2018 Initial release

V 2.0 09/2019 New text Chassis ID Prom Tool, new CPU types

V 3.0 12/2020 Cable plan updated

V 4.0 04/2021 – Verifying system information backup/restore

–Replacing the CMOS battery

– Replacing the system board

10/2021 – Some structures adepted to new editoral

system

– Information about Infrastructure Manager

(ISM) added

V 5.0 04/2022 – Cable plan updated

– List of released adapters updated

Upgrade and Maintenance Manual TX1330 M4

Content

1 Introduction 19

1.1 Concept and target groups of this manual 19

1.2 Notational conventions 19

2 Before you start 21

2.1 Basic information 21

2.1.1 Proceeding 21

2.1.2 Advanced Thermal Design (ATD) 21

2.1.3 Installing optional components 22

2.1.4 Replacing a defective component 22

2.2 Classification of procedures 23

2.2.1 Assignment of unit categories 23

2.2.2 Customer Replaceable Units (CRU) 23

2.2.3 Upgrade and Repair Units (URU) 24

2.2.4 Field Replaceable Units (FRU) 25

2.3 Average task duration 27

2.4 Tools you need at hand 28

2.5 Documentation overview 28

2.5.1 About availability of manuals 28

2.5.2 List of documents 28

3 Important information 31

3.1 Introduction 31

3.2 Safety instructions 31

3.2.1 Basic safety instructions 31

3.2.2 Before starting up 32

TX1330 M4 Upgrade and Maintenance Manual

3.2.3 Installation and operation 32

3.2.4 Batteries 35

3.2.5 Working with optical disk drives (ODDs) and media 35

3.2.6 Laser information 37

3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 37

3.2.8 Transporting the server 39

3.2.9 Installing the server in the rack 40

3.2.10 Other important information 40

3.3 ENERGY STAR 41

3.4 CE conformity 41

3.5 FCC Class A Compliance Statement 42

3.6 Environmental protection 43

4 Basic hardware procedures 45

4.1 Using diagnostic information 45

4.1.1 Proceeding 45

4.1.2 Locating the defective server 45

4.1.3 Determining the error class 46

4.1.4 Locating the defective component 46

4.2 Shutting down the server 47

4.3 Disconnecting the power cord 48

4.3.1 Disconnecting the power cord (standard PSU) 48

4.3.2 Disconnecting the power cord (hot-plug PSU) 49

4.4 Getting access to the component 50

4.4.1 Safety notes 50

4.4.2 Rack model 50

4.4.2.1 Extending the server out of the rack 50

4.4.2.2 Removing the server from the rack 51

4.4.2.3 Removing the top cover 54

4.4.2.4 Removing the rack front cover 55

4.4.3 Floorstand model 58

Content

Upgrade and Maintenance Manual TX1330 M4

4.4.3.1 Unlocking the server 58

4.4.3.2 Removing the side cover 60

4.4.3.3 Removing the accessible drive bay cover 61

4.4.3.4 Removing the HDD bay cover 63

4.4.3.5 Removing the front cover 63

4.5 Reassembling 66

4.5.1 Safety notes 66

4.5.2 Rack model 66

4.5.2.1 Installing the rack front cover 66

4.5.2.2 Installing the top cover 68

4.5.2.3 Installing the server in the rack 69

4.5.2.4 Sliding the server into the rack 72

4.5.3 Floorstand model 73

4.5.3.1 Installing the front cover 73

4.5.3.2 Installing the HDD bay cover 75

4.5.3.3 Installing the accessible drive bay cover 76

4.5.3.4 Installing the side cover 77

4.5.3.5 Locking the server 78

4.6 Connecting the power cord 79

4.6.1 Connecting the power cord (standard PSU) 79

4.6.2 Connecting the power cord (hot-plug PSU) 80

4.7 Switching on the server 81

4.8 Handling the system fan module 82

4.8.1 Removing the system fan module 82

4.8.2 Installing the system fan module 85

4.9 Handling accessible drive bays 89

4.9.1 Opening the accessible drive locking bar 89

4.9.2 Closing the accessible drive locking bar 91

4.9.3 Accessible drive filler covers 92

4.9.3.1 Removing accessible drive filler covers 92

4.9.3.2 Installing accessible drive filler covers 93

4.9.4 Accessible drive covers 95

4.9.4.1 Removing accessible drive covers 95

4.9.4.2 Installing accessible drive covers 96

Content

TX1330 M4 Upgrade and Maintenance Manual

4.10 Handling the anti-tilt bracket 97

4.10.1 Installing the anti-tilt bracket 97

4.10.2 Removing the anti-tilt bracket 98

5 Basic software procedures 99

5.1 Validation 99

5.2 Starting the maintenance task 99

5.2.1 Suspending BitLocker functionality 99

5.2.2 Disabling the boot watchdog 100

5.2.3 Removing backup and optical disk media 102

5.2.4 Verifying and configuring the backup software solution 102

5.2.5 Switching on the ID indicator 102

5.3 Completing the maintenance task 103

5.3.1 Updating or recovering the BIOS and iRMC S5 103

5.3.2 Verifying system information backup or restore 105

5.3.3 Updating expansion card firmware 106

5.3.4 Enabling Option ROM scan 107

5.3.5 Reconfiguring the backup software solution 108

5.3.6 Resetting the boot retry counter 108

5.3.7 Resetting the error status after replacing memory modules or

CPUs 110

5.3.7.1 Resetting the error status after replacing memory modules 110

5.3.7.2 Resetting the error status after replacing CPUs 112

5.3.8 Enabling the boot watchdog 114

5.3.9 Enabling replaced components in the BIOS 115

5.3.10 Verifying the memory mode 116

5.3.11 Verifying the system time settings 116

5.3.12 Viewing and clearing the System Event Log (SEL) 117

5.3.13 Updating the NIC configuration file in a Linux and VMware

environment 120

5.3.14 Resuming BitLocker functionality 121

5.3.15 Performing a RAID array rebuild 122

5.3.16 Looking for MAC/WWN/GUID and SAS addresses 123

5.3.16.1 Basic information 123

5.3.16.2 Looking for the MAC address of a LAN controller 123

5.3.16.3 Looking for the WWN address of a fibre channel controller 124

Content

Upgrade and Maintenance Manual TX1330 M4

Other manuals for PRIMERGY TX1330 M4

Table of contents

Other Fujitsu Server manuals

Fujitsu

Fujitsu Primergy RX300 S2 User manual

Fujitsu

Fujitsu Primergy BX920 S3 User manual

Fujitsu

Fujitsu PRIMERGY TX100 S1 User manual

Fujitsu

Fujitsu BS2000 SE Series User manual

Fujitsu

Fujitsu PRIMERGY TX150 S5 Owner's manual

Fujitsu

Fujitsu PRIMERGY CX2550 M6 User manual

Fujitsu

Fujitsu PRIMERGY RX2520 M1 User manual

Fujitsu

Fujitsu PRIMERGY RX200 S2 User manual

Fujitsu

Fujitsu PRIMERGY Econel 100 User manual

Fujitsu

Fujitsu PRIMERGY RX200 S3 User manual

Fujitsu

Fujitsu PRIMERGY GX2570 M6 User manual

Fujitsu

Fujitsu PRIMERGY CX270 S1 User manual

Fujitsu

Fujitsu PRIMERGY RX300 S5 User manual

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Owner's manual

Fujitsu

Fujitsu PRIMEQUEST 2800B3 User manual

Fujitsu

Fujitsu Supercomputer PRIMEHPC FX700 Installation instructions

Fujitsu

Fujitsu FD-1000ST User manual

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Instruction sheet

Fujitsu

Fujitsu PRIMERGY TX200 S7 User guide

Fujitsu

Fujitsu PRIMERGY TX140 S1p User manual

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Assembly instructions

Fujitsu

Fujitsu PRIMERGY RX600 S4 User manual

Fujitsu

Fujitsu PRIMERGY BX900 User guide

Fujitsu

Fujitsu PRIMERGY RX300 S7 User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started