Fujitsu PRIMERGY Econel 200 S2 Owner's manual

PRIMERGY Econel 200 S2

Server

Service Supplement

Edition February 2007

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

Econel 200 S2 Service Supplement

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the documentation . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.2 Removing the processor fan 2 . . . . . . . . . . . . . . . . . . 17

4.1.3 Removing the system fan . . . . . . . . . . . . . . . . . . . . 18

4.1.4 Removing the memory air duct . . . . . . . . . . . . . . . . . 18

4.1.5 Removing the processor fan 1 . . . . . . . . . . . . . . . . . . 18

4.1.6 Removing the front cover . . . . . . . . . . . . . . . . . . . . 19

4.2 Replacing the operating panel cable . . . . . . . . . . . . . 21

4.3 Replacing the USB cable (front side) . . . . . . . . . . . . . 23

4.4 Replacing the temperature sensor . . . . . . . . . . . . . . 25

4.5 Replacing the power supply unit . . . . . . . . . . . . . . . 26

4.6 Replacing the intrusion switch . . . . . . . . . . . . . . . . 29

4.7 Replacing the Chassis ID board . . . . . . . . . . . . . . . . 30

4.8 Replacing the system board . . . . . . . . . . . . . . . . . . 31

Service Supplement Econel 200 S2

Contents

5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5.1 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5.1.1 Chassis ID board . . . . . . . . . . . . . . . . . . . . . . . . . 35

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Econel 200 S2 Service Supplement 5

1 Introduction

The PRIMERGY Econel 200 S2 server is an Intel-based server for workgroups

and small networks. The server is suitable for use as a file server and also as

an application, information or Internet server.

1.1 Overview of the documentation

Concept and target group of this manual

This Service Supplement completes the information given in the Operating

Manual, the Options Guide and the Technical Manual of the system board.

The actions described in this manual should only be performed by service

personnel.

Service DVD

Service partners of Fujitsu Siemens Computers can order a Service DVD

PRIMERGY. On the DVD the following manuals are available in PDF format:

– “Safety notes and other important information” manual

– Operating Manual for PRIMERGY Econel 200 S2

– Technical Manual for the system board D2530

– Options Guide for PRIMERGY Econel 200 S2

– Service Supplement PRIMERGY Econel 200 S2

– BIOS Setup manual

6 Service Supplement Econel 200 S2

Overview of the documentation Introduction

Information/procedure Manual

Detailed safety notes Safety notes and other

important information

Features and technical data of the server

Installation and operation, among other things:

– External ports on the server

– Operation

– Configuration of the server

Troubleshooting

Operating Manual

Information about the system board:

– Features of the system board

– Pin assignment of the connectors

– Jumper settings

– LED indicators

– Replacing the battery

Technical Manual

Extensions and upgrades:

IFor some components only the installation

routine is described in the Options Guide.

Removing these components proceed in

reverse order.

– Installing a second processor

– Extending the main memory

– Installing accessible drives

– Installing SATA hard disk drives

– Installing expansion boards in PCI slots

Cabling

Options Guide

Table 1: Overview of the Documentation Econel 200 S2

Econel 200 S2 Service Supplement 7

Introduction Notational conventions

1.2 Notational conventions

The following notational conventions are used in this manual:

Replacement routines:

– Replacing the operating panel cable

– Replacing the USB cable (front side)

– Replacing the temperature sensor

– Replacing the power supply unit

– Replacing the intrusion switch

– Replacing the Chassis ID board

– Replacing the system board

Board layout

Service Supplement

BIOS setup BIOS Setup

text in italics indicate commands, menu items or software programs.

“quotation marks” indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown

VCAUTION! Pay particular attention to texts marked with this

symbol. Failure to observe this warning may endanger

your life, destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips

Table 2: Notational conventions

Information/procedure Manual

Table 1: Overview of the Documentation Econel 200 S2

Econel 200 S2 Service Supplement 9

2Procedure

VCAUTION!

The actions described in this manual should only be performed by

service personnel.

ÊBefore doing anything else, please take notice of chapter “Safety notes” on

page 11 et seq. .

ÊMake sure all necessary manuals (see service DVD) are available; possibly

print of the PDF files. You will definitely need the Operating Manual for the

server, the Options Guide for the server and the Technical Manual for the

system board.

ÊShut down the server correctly, switch it off, pull out the power plug, and

open the server as described in the chapter “Replacement routines” on

page 17 et seq. .

ÊReplace the defective component as described in the relevant chapter.

ÊClose the server.

ÊConnect the cables.

ÊConnect the server to the line voltage.

ÊStart the operating system.

ÊIf necessary, configure the server as required.

Other manuals for PRIMERGY Econel 200 S2

Table of contents

Other Fujitsu Server manuals

Fujitsu

Fujitsu FUTRO S900 User manual

Fujitsu

Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance... User manual

Fujitsu

Fujitsu PRIMERGY TX2560 M1 User manual

Fujitsu

Fujitsu Primergy RX300 S4 User manual

Fujitsu

Fujitsu PRIMEQUEST 3000 Series User manual

Fujitsu

Fujitsu Primergy BX900 S2 User manual

Fujitsu

Fujitsu Primergy RX600 S2 User manual

Fujitsu

Fujitsu PRIMERGY TX300 S8 User manual

Fujitsu

Fujitsu PRIMERGY TX150 S5 User manual

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Operating and maintenance instructions

Fujitsu

Fujitsu PRIMERGY RX200 S8 User guide

Fujitsu

Fujitsu PRIMERGY RX100 S7 User manual

Fujitsu

Fujitsu PRIMERGY TX200 S2 Guide

Fujitsu

Fujitsu PRIMERGY TX100 S3 User manual

Fujitsu

Fujitsu SE700 User manual

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Assembly instructions

Fujitsu

Fujitsu PRIMERGY BX600 S3 User manual

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Instruction sheet

Fujitsu

Fujitsu PRIMEQUEST 2000 Series User manual

Fujitsu

Fujitsu teamserver M851i User manual

Fujitsu

Fujitsu PRIMERGY RX2530 M1 User manual

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Assembly instructions

Fujitsu

Fujitsu SPARC Enterprise T5140 User manual

Fujitsu

Fujitsu SPARC M12-2 User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started