Friedrich Ductless split system User manual

960-911-06

Installation Manual

TYPE : Single Zone

ENGLISH

FRANÇAIS

ESPAÑOL

Air Conditioner Installation Manual

CONTENTS

Safety Precautions ..............................................................................................3

Installation of Outdoor Unit................................................................................6

Wiring Connection...............................................................................................8

Connecting Copper Pipes.................................................................................11

Leakage test and Evacuation ...........................................................................17

Test running .......................................................................................................19

Function..............................................................................................................20

Self-diagnosis Function....................................................................................21

Installation Guide at the Seaside .....................................................................22

2Air Conditioner

To prevent the injury of the user or other people and property damage, the following instructions

must be followed.

■Be sure to read before installing the air conditioner.

■Be sure to observe the cautions specified here as they include important items related to safety.

■Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is

classified by the following indications.

■The meanings of the symbols used in this manual are as shown below.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to properties only.

■Installation

Be sure not to do.

Be sure to follow the instruction.

Safety Precautions

Always perform grounding.

• Otherwise, it may cause electri-

cal shock.

Ensure that the power cord

used is not frayed or dam-

aged in anyway.

• Otherwise, it may cause a fire

or electrical shock.

Please contact a licensed ser-

vice center or installer to install

this equipment.

•

Otherwise, it may cause a fire, elec-

trical shock, explosion or injury.

Securely attach the electrical

part cover to the indoor unit

and the service panel to the

outdoor unit.

•

If the electrical part cover of the indoor

unit and the service panel of the out-

door unit are not attached securely, it

could result in a fire or electric shock

due to dust, water, etc.

Ensure a dedicated circuit

breaker is installed as well as

an independent electrical dis-

connect.

• No installation may cause a fire

and electrical shock.

Do not keep or use flammable

gases or combustibles near

the air conditioner.

• Otherwise, it may cause a fire

or the failure of product.

Ensure that the outdoor system is free of dam-

age prior to installation.

• It may cause injury or an accident.

Do not service this equipment unless you are

a licensed contractor.

• It will cause a fire or electrical shock.

Use a vacuum pump or Inert (nitrogen) gas when doing leakage test or air purge. Do not use

oxygen, compressed air or other gases which may be flammable or harmful. Doing so causes

risk for fire, explosion, injury or death.

• There is the risk of death, injury, fire or explosion.

Installation Manual 3

Safety Precautions

ENGLISH

4Air Conditioner

Safety Precautions

Ensure that system is properly secured once

installation is complete.

• Otherwise, it may result in personal injury.

Use caution when unpacking and installing.

• Sharp edges may cause injury.

Do not use the power cord

near the heating tools.

• Otherwise, it may cause a fire

and electrical shock.

Do not open the suction

inlet of the indoor/outdoor

unit during operation.

• Otherwise, it may electrical

shock and failure.

If equipment is submerged.

Please shut off power and

call a service center.

• Otherwise, it may cause the

failure of machine or electrical

shock.

Hold the plug by the head

when taking it out.

• It may cause electric shock

and damage.

Never touch the metal parts

of the unit when removing

the filter.

• They are sharp and may

cause injury.

Do not use the equipment

as a step or a shelf.

• It may cause an injury through

dropping of the unit or falling

down.

Do not place a heavy object

on the power cord.

• Otherwise, it may cause a fire

or electrical shock.

When the product is sub-

merged into water, always

contact the service center.

• Otherwise, it may cause a fire

or electrical shock.

Take care so that children

may not step on the outdoor

unit.

• Otherwise, children may be

seriously injured due to falling

down.

Ensure system is installed

on a dedicated circuit.

• It will cause an electric shock

or a fire due to heat genera-

tion.

Do not use the damaged

power cord.

• Otherwise, it may cause a fire

or electrical shock.

Do not alter the power cord

without seeking assistance

from a licensed professional.

• Otherwise, it may cause a fire

or electrical shock.

Ensure power cord is

securely in place and care

is taken to prevent cord

from being pulled loose.

• Otherwise, it may cause a fire

or electrical shock.

Unplug the unit if strange

sounds, smell, or smoke

comes from it.

• Otherwise, it may cause elec-

trical shock or a fire.

Keep unit clear of any heat

source.

• Otherwise, it may cause a fire.

■Operation

Installation Manual 5

Safety Precautions

ENGLISH

■Installation

Ensure drain is securely fastened.

• Otherwise, it may cause water leakage.

Install in area where consideration of sur-

roundings have been made, noise and heat

may not affect those nearby.

• Otherwise, it may cause dispute with the neigh-

bors.

Always check for leaks at all connections, if

leak is found perform proper repairs.

• Otherwise, it may cause the failure of product.

Ensure equipment is level during installa-

tion.

• Otherwise, it may cause vibration or water

leakage.

Avoid excessive cooling and perform venti-

lation sometimes.

• Otherwise, it may do harm to your health.

Use a soft cloth to clean. Do not use wax,

thinner, or a strong detergent.

• The appearance of the air conditioner may

deteriorate, change color, or develop surface

flaws.

Do not use an appliance for special purposes

such as preserving animals vegetables, pre-

cision machine, or art articles.

• Otherwise, it may damage your properties.

Do not block or restrict the airflow inlet or

outlet.

• Otherwise, it may cause the failure of appli-

ance or an accident.

■Operation

1. Installation Locations

• If an awning is built over the unit to prevent

direct sunlight or rain exposure, make sure

that heat radiation from the condenser is not

restricted.

• Ensure that the spaces indicated by the

arrows around the front, back and side of the

unit are followed.

• Do not place animals and plants in the path of

the warm air.

• Take the air conditioner weight into account

and select a place where noise and vibration

are minimum.

• Be considerate of the surroundings when

choosing the location for the equipment to be

installed.

More than

300(11 13/16)

Fence or

obstacles

More than

700(27 9/16)

More than

600(23 21/32)

More than

300(11 13/16)

More than

300(11 13/16)

Sunroof

Installation of Outdoor Unit

2. Piping length and the elevation

If installed tube is shorter than 7.6 m, additional charging is not necessary.

Additional Refrigerant = (A -7.6) x Additional refrigerant (g)

6Air Conditioner

Outdoor unit

Indoor unit

Outdoor unit

Indoor unit

Unit : mm(inch)

Model

Pipe Size

mm(inch)

Length A

Unit : m(ft)

Elevation B

Unit : m(ft)

Additional

refrigerant

Unit :

g/m(oz/ft)

Gas Liquid Standard Max. Standard Max.

MR24UY3J

Ø15.88(5/8) Ø9.52(3/8) 7.6(25) 50(164) 5(16) 30(98)

40(0.43)

MR36UY3J

Ø15.88(5/8) Ø9.52(3/8) 7.6(25) 75(246) 5(16) 30(98)

40(0.43)

Installation of Outdoor Unit

Installation Manual 7

ENGLISH

Night Silent Operation setting

1. Open the Side panel or Top Cover of outdoor unit.

2. Set the SW01N (PIP SW2).

3. Close the Side panel or Top Cover.

SW01N

MR24UY3J MR36UY3J

The power cord

connected to the outdoor unit should be complied

withIEC 60245 or HD 22.4 S4 (This equipment shall be provided with a

cord set complying with the national regulation.

The connecting cable connected to the outdoor unit should be

complied with IEC 60245 or HD 22.4 S4 (This equipment shall be

provided with a cord set complying with the national regulation.)

If the supply cord is damaged, it must be replaced by a special cord or assembly availible from the manufacturer of its service agent.

CAUTION

NORMAL

CROSS-SECTIONAL

AREA 0.75mm2

When the connection line between the indoor unit and

outdooor unit is over 40m, connect the telecommunication

line and power line separately.

20mm

GN/YL

35±5mm

10±3mm

GN/YL

20mm

35±5mm

10±3mm

Wiring Connection

Electrical Wiring

Outdoor

Indoor

Main

power source Switch box

ELCB

Perform the electrical wiring work according to the electrical wiring connection.

• All wiring must comply with local requirements.

•

Select a power source that is capable of supply-

ing the current required by the air conditioner.

• Use a recognized ELCB(Electric Leakage Cir-

cuit Breaker) between the power source and

the unit. A disconnection device to adequately

disconnect all supply lines must be fitted.

• Model of circuit breaker recommended by

authorized personnel only

8Air Conditioner

Connecting Cables between Indoor Unit and Outdoor Unit

Model Phase(Ø) ELCB

MR24UY3J 1 30A

MR36UY3J 140A

Model Phase(Ø) Area(mm

)

MR24UY3J

(AUUW24GD2) 12.5

MR36UY3J

(AUUW36GD2) 15

Outdoor

unit Indoor

unit

Wiring Connection

Installation Manual 9

ENGLISH

• For wiring, use the designated power wire and connect firmly, then secure to prevent outside pres-

sure being exerted on the terminal block.

• Use an appropriate screwdriver for tightening the terminal screws. A screwdriver with a small head

will strip the head and make proper tightening impossible.

• Over-tightening the terminal screws may break them.

When none are available, follow the instructions below.

• Do not connect wiring of different thicknesses to the power terminal block. (Slack in the power

wiring may cause abnormal heat.)

• When connecting wiring which is the same thickness, do as shown in the figure below.

◆

Precautions when laying power wiring

Round pressure terminal Power wire

Use round pressure terminals for connections to the power terminal block.

Wiring Connection

CAUTION:

• The circuit diagram is not subject to change without notice.

• Be sure to connect wires according to the wiring diagram.

• Connect the wires firmly, so that not to be pulled out easily.

• Connect the wires according to color codes by referring to the wiring diagram.

Makes sure rubber bushings are properly

used in knock out holes after connecting

main power.

Insulation

Main

Terminal

Block

Cord clamp

• Remove the side panel for wiring connection.

• Use the cord clamp to fix the cord.

• Grounding work

- connect the cable of diameter more to the grounding terminal provided in the control

box and do grounding

Connecting the cable to Outdoor Unit

10 Air Conditioner

CAUTION:

•

The power cord should be selected according to the specifications below.

This manual suits for next models

Table of contents

Languages:

Other Friedrich Air Conditioner manuals

Friedrich

Friedrich Kuhl KCS12B10A User manual

Friedrich

Friedrich ZONEAIRE SELECT PZE07K3SA Guide

Friedrich

Friedrich MWM24Y3J User manual

Friedrich

Friedrich M18YJ User manual

Friedrich

Friedrich PTAC Series Original operating instructions

Friedrich

Friedrich Vert-I-Pak VEA09K User manual

Friedrich

Friedrich FSHSR09A1A User manual

Friedrich

Friedrich MR09C1F User manual

Friedrich

Friedrich MR09C1H User manual

Friedrich

Friedrich SS08 User manual

Friedrich

Friedrich SV08A10A Building instructions

Friedrich

Friedrich Uni-Fit UE08A13B User manual

Friedrich

Friedrich 0 User manual

Friedrich

Friedrich VERT-I-PAK VEA09 Original operating instructions

Friedrich

Friedrich QuietMaster KM18 User manual

Friedrich

Friedrich MR36Y3J User manual

Friedrich

Friedrich ZoneAire Premier R-32 Series User manual

Friedrich

Friedrich M18CF User manual

Friedrich

Friedrich CP05N10 Building instructions

Friedrich

Friedrich Uni-Fit UE10 Original operating instructions

Friedrich

Friedrich CP08C10 Building instructions

Friedrich

Friedrich Twintemp YS09 User manual

Friedrich

Friedrich SH15 User manual

Friedrich

Friedrich MW09Y3FM User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual