Fluke 114 User manual

Other manuals for 114

3

Table of contents

Other Fluke Multimeter manuals

Popular Multimeter manuals by other brands

Agilent Technologies

Agilent Technologies 34420A user guide

Hameg

Hameg HM 8012 manual

Mastech

Mastech MY70 Operation manual

Steren

Steren MUL-300 user manual

Somogyi Elektronic

Somogyi Elektronic home SMA 92 instruction manual

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 operating instructions

PeakTech

PeakTech 4000 Procedure of calibration

YOKOGAWA

YOKOGAWA 90050B user manual

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 operating instructions

Tempo Communications

Tempo Communications MM200 instruction manual

Elenco Electronics

Elenco Electronics CM-1555 operating instructions

Mastech

Mastech MS8238C user manual

SDAR

SDAR 830A, 830B, 830D, 830C user manual

RS PRO

RS PRO RS-9519BT instruction manual

BGS technic

BGS technic 8890 instruction manual

Amprobe

Amprobe Hexagon 60 user manual

Morris

Morris 57074 user manual

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter user guide

Technical Data

Fluke 114

Electrical Multimeter

Features include:

•AutoVolt: automatic ac/dc voltage selection

•Large white LED backlight to work in poorly lit areas

•Resistance and continuity

•Min/Max/Average to record signal fluctuations

•CAT III 600 V safety rated

Compact true-rms

meter for electrical

troubleshooting

The Fluke 114 is the troubleshooting

tool for “go/no-go” testing. It includes

a feature to prevent false readings

caused by ghost voltage.

General specifications

Accuracy is specified for 1 year after calibration, at operating

temperatures of 18 °C to 28 °C, with relative humidity at

0 % to 95 %.

The accuracy specifications take the form of:

± ( [ % of Reading ] + [ Counts ] )

Maximum voltage between

any terminal and earth

ground

600 V

Surge protection 6 kV peak per IEC 61010-1 600 V

CAT III, Pollution Degree 2

Display Digital: 6,000 counts, updates 4/sec

Bar graph 33 segments, updates 32/sec

Operating temperature -10 °C to + 50 °C

Storage temperature -40 °C to + 60 °C

Battery 9 volt Alkaline, NEDA 1604A/

IEC 6LR61

Battery life 400 hours typical, without backlight

N10140

R

Actual size

Accuracy specifications

2 Fluke Corporation 114 Electrical Multimeter

Fluke Corporation

PO Box 9090, Everett, WA USA 98206

Fluke Europe B.V.

PO Box 1186, 5602 BD

Eindhoven, The Netherlands

For more information call:

In the U.S.A. (800) 443-5853 or

Fax (425) 446-5116

In Europe/M-East/Africa (31 40) 2 675 200 or

Fax (31 40) 2 675 222

In Canada (800)-36-FLUKE or

Fax (905) 890-6866

From other countries +1 (425) 446-5500 or

Fax +1 (425) 446-5116

Web access: http://www.fluke.com

©2006 Fluke Corporation. All rights reserved.

Printed in U.S.A. 8/2006 2634055 D-EN-N Rev A

Fluke. Keeping your world

up and running.

Ordering Information

Fluke-114 Electrical Multimeter

Included

TL75 Test leads, holster, User’s manual

and 9 V battery (installed).

Measurement Range Resolution Accuracy ± ([% of reading] + [counts])

DC millivolts 600.0 mV 0.1 mV 2.0 % + 3

DC volts 6.000 V 0.001 V

60.00 V 0.01 V

600.0 V 0.1 V

Auto volts 600.0 V 0.1 V 2.0 % + 3 (dc, 45 Hz to 500 Hz)

4.0 % + 3 (500 Hz to 1 kHz)

AC millivolts1true-rms 600.0 mV 0.1 mV 1.0 % + 3 (dc, 45 Hz to 500 Hz)

2.0 % + 3 (500 Hz to 1 kHz)

AC volts1true-rms 6.000 V 0.001 V

1.0 % + 3 (dc, 45 Hz to 500 Hz)

2.0 % + 3 (500 Hz to 1 kHz)

60.00 V 0.01 V

600.0 V 0.1 V

Continuity 600 W1 WBeeper on < 20 W, off > 250 W; detects

opens or shorts of 500 µs or longer.

Ohms 600.0 W0.1 W0.9 % + 2

6.000 kW0.001 kW

0.9 % + 1

60.00 kW0.01 kW

600.0 kW0.1 kW

6.000 MW0.001 MW

40.00 MW0.01 MW1.5 % + 2

Notes:

1 All ac voltage ranges are specified from 1 % to 100% of range. Because inputs below 1 % of range are not specified,

it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected

from a circuit or are shorted together. For volts, crest factor of ≤3 at 4000 counts, decreasing linearly to 1.5 at full

scale. AC volts is ac-coupled. Auto-V LoZ, and ac mV are dc-coupled.

2 Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage.