Fluke 8808A Configuration guide

Other manuals for 8808A

6

Table of contents

Popular Multimeter manuals by other brands

Agilent Technologies

Agilent Technologies 34420A user guide

Hameg

Hameg HM 8012 manual

Mastech

Mastech MY70 Operation manual

Steren

Steren MUL-300 user manual

Somogyi Elektronic

Somogyi Elektronic home SMA 92 instruction manual

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 operating instructions

PeakTech

PeakTech 4000 Procedure of calibration

YOKOGAWA

YOKOGAWA 90050B user manual

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 operating instructions

Tempo Communications

Tempo Communications MM200 instruction manual

Elenco Electronics

Elenco Electronics CM-1555 operating instructions

Mastech

Mastech MS8238C user manual

SDAR

SDAR 830A, 830B, 830D, 830C user manual

RS PRO

RS PRO RS-9519BT instruction manual

BGS technic

BGS technic 8890 instruction manual

Amprobe

Amprobe Hexagon 60 user manual

Morris

Morris 57074 user manual

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter user guide

Manual Supplement

© 2008-2012 Fluke Corporation. All rights reserved. 



Manual Title: 8808A Getting Started Supplement Issue: 6

Part Number: 2716412 Issue Date: 12/12

Print Date: July 2007 Page Count: 2

Revision/Date:

This supplement contains information necessary to ensure the

accuracy of the above manual.

8808A Getting Started Manual Supplement

2/10 1

Change #1, 44931, 46479, 47892

On page 1, in the Specifications section, under Relative Humidity (non-condensing), replace

Operating with the following:

Operating................................................ <90 % (0 C to 28 C)

<75 % (28 C to 40 C)

<45 % (40 C to 50 C)

On page 5, under DC Current, Shunt Resistance, replace the Burden Voltage with the

following:

Burden voltage <5 mV for 200 A and 2 mA range.

In the Input Characteristics table, change the Burden Voltage for both 200 µA and 2 mA

ranges,

From: <1 mV

To: <5 mV

Change #2

On page 6, under the Warning, replace steps 4 and 5, with the following:

4. Insert the other end of the test lead into the mA terminal. If the fuse is good, the Meter

displays a reading of <10 . If the fuse is blown, the Meter displays  to indicate an overload.

5. Remove the test lead from the mA terminal and insert it into the 10 A terminal. If the fuse is

good, the Meter displays a reading of <2 . If the fuse is blown, the Meter displays  to

indicate an overload.

Change #3, 53744

Under the LIMITED WARRANTY AND LIMITATION OF LIABILITY replace the second

sentence with the following:

The warranty period is three years limited and begins on the date of shipment.

On page 11, replace Table 6 with the following:

Table 6. Accessories

Item Model / Part Number

Premium Test Lead Set TL71

Fuse, .25*1.25, 0.063 A, 250 V, Slow 163030

Fuse, .25*1.25, 0.125 A, 250 V, Slow 166488

F1 - Fuse, 11 A, 1000 V, Fast, 406INX1.5IN, BULK 803293

F2 - Fuse, 440 mA, 1000 V, Fast, 406INX1.375IN, BULK 943121

Rack Mount Kit 8845A & 8846A Single Y8846S

Rack Mount Kit 8845A & 8846A Dual Y8846D

USB to RS-232 Cable Adapter (included) 884x-USB

Precision Electronic Probe Set TL910

2X4 Wire Ohms 1000 V Test Lead TL2X4W-PTII

FlukeView Forms Basic Software (included) FVF-SC5

FlukeView Forms Software Upgrade to enhanced version FVF-UG

Manual Supplement 8808A Getting Started

2 12/12

In the Specifications section on page 2, change the Warranty,

From:

One year

To: Three years limited

Change #4

On page 6, under the Current-Input Fuses section add the following Table:

Current Input Fuse Table

F1 F1 - Fuse, 11 A, 1000 V, Fast blow or equivalent 803293

F2 F2 - Fuse, 440 mA, 1000 V, Fast blow or equivalent 943121

On page 6, under the Warning replace step 3 with:

Press to set the range to 200 .

On page 7, under the Warning replace step 5 with:

5. Remove the defective fuse and replace it with a fuse of an appropriate rating. See the Current Input

Fuse Table.

Change #5, 64137, 64189

On page 4, add the following to the Symbols, table:

Conforms to relevant South Korean EMC Standards.

Conforms to CAN/CSA-C22.2 No. 61010-1, second edition,

including Amendment 1.

On page 2, in the Specification section, add Electromagnetic Environment and replace

Safety and EMC with:

Safety ................................................................ IEC 61010-1, 600 V CAT II / 1000 V CAT I, Pollution Degree 2

Electromagnetic Environment.............. IEC 61326-1, Basic

EMC.................................................................... Applies to use in Korea only. Class A Equipment (Industrial Broadcasting &

Communication Equipment) [1]

[1] This product meets requirements for industrial (Class A)

electromagnetic wave equipment and the seller or user should take

notice of it. This equipment is intended for use in business

environments and is not to be used in homes.