Fisher FIELDVUE DVC6200 User manual

DVC6200/DVC2000

Digital Valve Controller on

Linear Actuator

Mounting Instructions

D103996X012

May 2014

Use these instructions to mount a FIELDVUE™

DVC6200/DVC2000 to a Linear Actuator.

WARNING

Avoid personal injury or property

damage from sudden release of process

pressure or bursting of parts. Before

performing any maintenance

operations:

Always wear protective clothing,

gloves, and eyewear.

Do not remove the actuator from

the valve while the valve is still

pressurized.

Disconnect any operating lines

providing air pressure, electric power, or

a control signal to the actuator. Be sure

the actuator cannot suddenly open or

close the valve.

Use bypass valves or completely

shut off the process to isolate the valve

from process pressure. Relieve process

pressure from both sides of the valve.

Vent the pneumatic actuator

loading pressure and relieve any

actuator spring precompression.

Use lock-out procedures to be sure

that the above measures stay in effect

while you work on the equipment.

Check with your process or safety

engineer for any additional measures

that must be taken to protect against

process media.

The visual aids in this document are for general

reference representation only. Refer to the

appropriate actuator instruction manual for actuator

installation, operation, maintenance, and parts

identification as this manual

may or may not include

all components shown for kit installation

1. Isolate the control valve from the process line

pressure and release pressure from both sides of the

valve body. Shut off all pressure lines to the actuator,

releasing all pressure from the actuator. Use lock-out

procedures to be sure that the above measures stay in

effect while you work on the equipment.

2. Attach connector arm assembly to stem block

using provided fasteners (including spacers and stud

bolts, if applicable).

DVC6200/DVC2000

Digital Valve Controller on

Linear Actuator

Mounting Instructions

D103996X012

May 2014

For fork-style connector arms remove the nuts and

indicator disk from the stem. Place the fork-style

extension arm flush with the bottom of the stem block

onto the stem. Reattach the indicator disk and nuts.

3. Loosely attach array to extension arm using

provided fasteners. (

Array not included with kit)

DVC6200/DVC2000

Digital Valve Controller on

Linear Actuator

Mounting Instructions

D103996X012

May 2014

4. Attach extension arm with array assembly to

connector arm.

5. Attach mounting plate to actuator using provided

hardware (including stud bolts, spacers, and

L-brackets, if applicable).

DVC6200/DVC2000

Digital Valve Controller on

Linear Actuator

Mounting Instructions

D103996X012

May 2014

6. Attach aligning template to mounting plate.

Adjust height of array until the middle line of the

aligning template is level with the corresponding line

of the array relative to stem block position.

***Care

needs to be taken to ensure that line the index marks

on the array do not move outside of the center index

mark on the alignment template***

DVC6200/DVC2000

Digital Valve Controller on

Linear Actuator

Mounting Instructions

D103996X012

May 2014

7. Attach insert assembly into the magnet housing

slot on the back of the device using the provided 3m

adhesive strip.

8. Remove aligning template. Attach device to

mounting bracket using provided fasteners.

DVC6200/DVC2000

Digital Valve Controller on

Linear Actuator

Mounting Instructions

D103996X012

May 2014

9. Attach remote mount air filter regulator (if

applicable).

Final Assembly

DVC6200/DVC2000

Digital Valve Controller on

Linear Actuator

Mounting Instructions

D103996X012

May 2014

Air Filter Regulator

Alignment Template

Connector Arm

Common Mounting Bracket

DVC2000

DVC6200

Extension Arm

Insert Assembly

Linear Feedback Array

Mounting Plate

Shield

Spacer

U-Bracket

DVC6200/DVC2000

Digital Valve Controller on

Linear Actuator

Mounting Instructions

D103996X012

May 2014

Neither Emerson, Emerson Process Management, Fisher, nor any of their affiliated entities assumes responsibility for the selection, use and

maintenance of any product. Responsibility for the selection, use and maintenance of any product remains with the purchaser and end user.

Fisherand FIELDVUE are marks owned by Fisher Controls International LLC, a member of the Emerson Process Management business unit of Emerson Electric

Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the

property of their respective owners.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to

be construed as warranties or guarantees, express or implied, regarding the products or services

described herein or their use or applicability. We reserve the

right to modify or improve the designs or specifications of such products at any time without notice.

Emerson Process Management

Marshalltown, Iowa 50158 USA

Sorocaba, 18087 Brazil

Chatham, Kent ME4 4QZ UK

Dubai, United Arab Emirates

Singapore 128461 Singapore

_____________________________________________________________________________________________________

Other manuals for FIELDVUE DVC6200

This manual suits for next models

Other Fisher Controllers manuals

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual