Festo DDLI-25 User manual
Operating
instructions
8113360
2019-05b
[8113362]
Linear drive
DDLI25_63
DDLI25_63
2 Festo – DDLI25_63 – 2019-05b
Translation of the original instructions
Identification of hazards and instructions on how to prevent them:
Danger
Immediate dangers which can lead to death or serious injuries
Warning
Hazards that can cause death or serious injuries
Caution
Hazards that can cause minor injuries
Other symbols:
Note
Material damage or loss of function
Recommendations, tips, references to other documentation
Essential or useful accessories
Information on environmentally sound usage
Text designations:
Activities that may be carried out in any order
1. Activities that should be carried out in the order stated
– General lists
èResult of an action/References to more detailed information
DDLI25_63
Festo – DDLI25_63 – 2019-05b English 3
Table of contents
1 Control sections and connections 4............................................
2 Function and application 5...................................................
3 Transport and storage 5.....................................................
4 Requirements for use 6......................................................
5 Installation 7..............................................................
5.1 Installation, mechanical 7....................................................
5.2 Installation, pneumatic 10.....................................................
5.3 Installation, electric 11.......................................................
6 Commissioning 12...........................................................
6.1 Commissioning the complete system 12..........................................
6.2 Commissioning DDLI 12.......................................................
7 Operation 14...............................................................
8 Maintenance and care 14.....................................................
9 Repair 14..................................................................
10 Accessories 14..............................................................
11 Trouble-shooting 15.........................................................
12 Technical data 16............................................................
DDLI25_63
4 Festo – DDLI25_63 – 2019-05b English
1 Control sections and connections
1 2 3 456 7 8
1Measuring system connection
2Compressed air connection with push-in
fitting (blue releasing ring)
3Earthing (e.g. via screws 4in the connection
cap)
4Screws with female thread for attachment of
the drive (4x per side)
5Slide
6Mounting thread for useful load
7Cylinder barrel with integrated displacement
encoder
8Compressed air connection with push-in
fitting (black releasing ring)
Fig. 1
For all available product documentation èwww.festo.com/pk
DDLI25_63
Festo – DDLI25_63 – 2019-05b English 5
2 Function and application
When compressed air is applied to the cylinder chambers in alternate sequence, the piston moves
backwards and forwards in the profiled tube. By means of a rigid connection to the piston, the slide
also moves. The slot in the cylinder barrel required for this is covered by a sealing band system. The
displacement encoder enables the position of the slide to be ascertained clearly at any time.
The displacement encoder with CAN axis interface is suitable for use with:
– end-position controllers SPC11-MTS-AIF-2
– axis controller SPC200 with axis interface SPC-AIF-MTS-2
– end-position controller CPX-CMPX
– position controller CPX-CMAX
– measuring module CPX-CMIX.
The linear drive DDLI in intended for the pneumatic positioning of
loads in slide operation.
The DDLI is intended for use in an industrial environment. Outside
of industrial environments, e.g. in commercial and mixed-residen
tial areas, actions to suppress interference may have to be taken.
Fig. 1 Slide mode
Note
Unpressurized movement of the slide is permitted only for fault correction and at low
speed. If excessive speed is used, the resulting low pressure can pull the sealing band
into the piston chamber. This leads to:
– high leakage and
– impermissible acceleration (e.g. in vertical mounting position).
3 Transport and storage
Take into account the weight of the DDLI.
Depending on the design, the DDLI weighs over 40 kg.
The following should be observed with regard to storage:
– short storage times
– cool, dry, UV and corrosion resistant.
– free from strong magnetic fields.
DDLI25_63
6 Festo – DDLI25_63 – 2019-05b English
4 Requirements for use
Note
Malfunctions will occur if the device is not used correctly.
Make sure that the specifications contained in this chapter are adhered to at all
times.
Take into consideration the legal regulations applicable for the destination, as well as:
– regulations and standards,
– regulations of the testing organizations and insurers,
– national specifications.
Note the warnings and instructions on the product and in the relevant operating instructions.
Remove all transport packaging, such as plastic sheets, caps and cartons (except for any covers in
the pneumatic ports).
The material used in the packaging has been specifically chosen for its recyclability (exception: oil
paper = residual waste).
Observe the local regulations for environmentally friendly waste management of electronic compon
ents.
Take into account the material specifications (èTechnical data).
Use the product in its original status, without any unauthorised product modifications.
Take into consideration the ambient conditions at the location of use.
Corrosive elements in the environment (e.g. ozone) will reduce the service life of the product.
Compare the maximum values specified in these operating instructions with your actual application
(e.g. pressures, forces, torques, temperatures, masses, speeds).
Operation of the product in compliance with the relevant safety regulations is contingent on adher
ence to the load limits.
Take the tolerance of the tightening torques into account. Unless otherwise specified, the tolerance
is ± 20 %.
For vertical installation:
Make sure that the slide has reached a stable position when it comes to a stop (e.g. the lowest
point or secured with external stops).
Make sure the compressed air is properly prepared (èTechnical data).
Read also the documentation for your control system (e.g. CPX-CMAX).
DDLI25_63
Festo – DDLI25_63 – 2019-05b English 7
5 Installation
5.1 Installation, mechanical
Note
Incorrectly parameterised positioning drives can perform sudden unexpected move
ments.
Use the DDLI only with the specified mounting positions and parameters
(èdrive-specific information on the controllers).
Observe the mounting requirements and instructions specified, especially in the
descriptions for the controllers used.
Leave all screws and threaded bolts in their original states, un
less you are requested to modify them in these instructions.
Avoid the sealing band being pressed and/or sucked in.
Damage to the sealing band reduces its reliability in operation.
Jerky movement of the unpressurized slide can cause a partial
vacuum that sucks the sealing band into the piston chamber. Fig. 2
Avoid the band system becoming damaged or excessively dirty.
Damage can cause leakage and reduce the performance of the DDLI.
Make sure that the device is installed free of distortion and deflection.
For fastening the drive:
Use:
– MUP central supports or
– foot mountings of type HP in combination with additional MUC central supports.
The following table shows the required minimum number of central supports and foot mountings.
Stroke range
[mm]
Number of mounting attachments
Central supports Foot mounting + Central supports
100 … 400 2 2 0
401 … 600 2 2 1
601 … 1200 3 2 1
1201 … 1400 3 2 2
1401 … 2000 4 2 2
Tab. 1
DDLI25_63
8 Festo – DDLI25_63 – 2019-05b English
Note
Excessive distances between the central supports can reduce the positioning accuracy.
Use at least the specified number of fastening elements (èTab. 1).
Make sure that the plates are equally distributed over the complete drive length.
For attachment of HP foot mountings and MUC central supports:
1. Place the foot mountings, as needed, on the threads 4on the
DDLI and at first screw the mounting screws in lightly.
2. Place the central supports over the slot nuts in the mounting
slot.
3. Screw in the mounting screws lightly at first so that the central
supports can still be moved.
4. Move the central supports so that the spaces between the
central supports and, if applicable, foot mounting are the same.
5. Tighten all mounting screws on the DDLI evenly with the
subsequent tightening torque (èTab. 2).
6. Fasten the DDLI via the foot mountings and central supports. Fig. 3
Tightening torques for fastening screws
Foot mounting HP
Size 25 32 40 63
[Nm] 3.0 4.0 5.0 14
Central support MUP
Size 18/25-P 32 40 63
[Nm] 2.9 4.5 5.5 18
Tab. 2
DDLI25_63
Festo – DDLI25_63 – 2019-05b English 9
7. Make sure that the central supports are outside the positioning
range of the movable load (especially with side mounting). To do
this, push the movable load one time over the complete
positioning path.
Fig. 4
To fasten the useful load:
Place the useful load so that the break-down torque from force
F remains parallel to the axis of motion and the lever arm a
remains low (Mx, My, Mz è12 Technical data). Fig. 5
With hard and stiff useful loads:
Note
If the slide 5becomes bent against a buckled use
ful load the service life of the guide will be reduced.
Make sure the mounting surface of the useful
load is even. Fig. 6
Note the tightening torques when attaching the useful load on the slide:
Size 25 32 40 63
Screw M5 M6 M8
Tightening torque [Nm] 3.5 6.5 12
Tab. 3
Effective loads with own guide:
Adjust the guide of the effective load and the DDLI so that they are exactly parallel.
Only in this way can you avoid overloading on the slide (permissible forces è12 Technical data).
Make sure that the effective load is coupled free of play to the DDLI (0.1 mm).
The driver DARD-L1-...-M offers a torque-free and almost backlash-free power transmission.
DDLI25_63
10 Festo – DDLI25_63 – 2019-05b English
5.2 Installation, pneumatic
When using in a vertical or sloping position:
Warning
Uncontrolled moving masses can cause personal injury and material damage (risk of
crushing). If there is a pressure failure, the moveable load (slide mass + mass of the
effective load) will slide down.
Read the documentation for your controller (e.g. CPX-CMAX). There you will find
information on pneumatic circuits with which the moveable mass can be prevented
from falling down.
Check whether safety measures are required to prevent slow sinking as a result of
leakage (e.g. toothed latches or moveable bolts).
Connect the tubing connections in the supply ports. The
threaded connectors are marked with different colours on the
releasing ring:
– blue releasing ring at connection 2:
movement to the right towards the measuring system end
– black releasing ring at connection 8:
movement to the left towards the measuring system
connection
The required tubing O.D. is summarised in the following table
(èTab. 4).
2 8
Fig. 7
Size Stroke [mm] Tubing outside diameter [mm]
25 100 … 160 6
225 … 2000 8
32 100 6
160 … 2000 8
40 100 … 750 8
850 … 2000 10
63 100 … 300 8
360 … 450 10
500 … 2000 12
Tab. 4
This manual suits for next models
3
Table of contents
Other Festo DC Drive manuals
Festo
Festo CMMT-ST-SW User manual
Festo
Festo SLG-8 Series User manual
Festo
Festo DRRD Series User manual
Festo
Festo DAPS-...-R-...-F...-...-MW Series User manual
Festo
Festo ESBF-BS-32 Parts list manual
Festo
Festo DFPD-Series User manual
Festo
Festo EGC-50-TB Parts list manual
Festo
Festo DFPI-...D2P-C1V-NB3P series User manual
Festo
Festo EMCA-EC-67-CO Series Reference guide
Festo
Festo DGC Series User manual
Festo
Festo CMMT-ST-C8-1C-...-S0 Series User manual
Festo
Festo FKP Series User manual
Festo
Festo DFPI ND2P-E-NB3 Series User manual
Festo
Festo EMCS-ST User manual
Festo
Festo DGO-xxx-A-B series User manual
Festo
Festo EMCA-EC-67 CO Series User manual
Festo
Festo DGCI Series User manual
Festo
Festo DRRD-12 User manual
Festo
Festo DRD Series User manual
Festo
Festo EMCA-EC-67 CO Series Reference guide
Popular DC Drive manuals by other brands
Rockwell Automation
Rockwell Automation PowerFlex 700S Programming manual
WEG
WEG DeviceNet CFW500 user manual
Siemens
Siemens SINAMICS G List manual
Siemens
Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Operating instructions & installation instructions
SOMFY
SOMFY JR RU 30 instructions
Beckhoff
Beckhoff AX8911 Documentation