FeiYu Tech Vimble C Quick start guide

Guilin Feiyu Technology Incorporated Company

Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]

- 1 -

VimblecGimbal

Firmware Upgrade Manual

Attention :

 Please do not operate any other function button except the ones indicated by

the instructions during upgrade.

 The firmware upgrade software is compatible with Windows operation system

provisionally,including Window XP / 7 / 8 / 8.1 / 10.

If you want to upgrade it in Mac, Please kindly download the upgrade software

and USB driver for Mac from our official website.

If you want to get the current version of the gimbal, please do the operations

step 1~6.

1. Download the USB driver from FeiyuTech official website

http://www.feyu-tech.com and install it. Then download the upgrade software

and the firmware for Vimble c.

2. Please refer the following connection diagram, connect the USB cable with

USB port of the computer and the gimbal. Check the port number in device

manager .

If the port number is more than COM10 , please modify it to the available

number which is within COM10 . ( please make sure the gimbal is powered off

until step 6)

Guilin Feiyu Technology Incorporated Company

Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]

- 2 -

3. Run the software ---“Gimbal-Update-3AXIS”directly if you use a PC with

Windows XP/7/8/8.1 .

If you have a PC with windows10 operation system, please right click the icon of

the software ,choose “Trouble shoot compatibility”---”Try the recommended

settings”---”test program”, Run the upgrade software in compatibility mode.

4. Software interface is shown in following picture.:

5. Choose the correct port number and the correct baud rate-115200, then click

OPEN button to open the com port.(The serial port number should be the

same as step 2).

6. Long press the function button, The connection between the gimbal and the

computer will be established automatically, The connection status and the

current version show up(For example, “LINK OK! VERSION 1. 48”) , Keep

holding the function button for 2~3 seconds after “LINK OK” showing up.

Guilin Feiyu Technology Incorporated Company

Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]

- 3 -

Release it, the indicator will alternately flashing blue and red，Which means

the power is ready and the connection is done.

(Tips: if you can’t see that the indicator alternately flashing blue and red,

please long press the function button for 2 seconds again.)

7. Click on OPEN FILE button and choose the correct firmware for the Vimble

c.

8. Click on UPDATE button to start upgrading, the process will display on the

software.

Guilin Feiyu Technology Incorporated Company

Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]

- 4 -

9. After all the blocks of the firmware are completely sent , please click “Confirm”

button to finish the upgrade. Close the software then remove the USB cable.

Long press the function button of the gimbal to power off. All the upgrade is done.

–––– END ––––

Note: We reserve the right to change this manual at any time!And the newest edition will

be shown on our official website www.feiyu-tech.com.

Table of contents

Other FeiYu Tech Camera Accessories manuals

FeiYu Tech

FeiYu Tech SCORT-C F2C User manual

FeiYu Tech

FeiYu Tech FY-G3 Ultra 3-Axis User manual

FeiYu Tech

FeiYu Tech vimble 2 Operation instructions

FeiYu Tech

FeiYu Tech vimble 2 User manual

FeiYu Tech

FeiYu Tech G6 Plus Installation guide

FeiYu Tech

FeiYu Tech QING User manual

FeiYu Tech

FeiYu Tech SCORP-C User manual

FeiYu Tech

FeiYu Tech VB4 User manual

FeiYu Tech

FeiYu Tech SPG LIVE User manual

FeiYu Tech

FeiYu Tech FY WG2 User manual

FeiYu Tech

FeiYu Tech FY WGS User manual

FeiYu Tech

FeiYu Tech G360 User manual

FeiYu Tech

FeiYu Tech G4 Plus User manual

FeiYu Tech

FeiYu Tech MINI 3D Pro User manual

FeiYu Tech

FeiYu Tech Vimble 2A User manual

FeiYu Tech

FeiYu Tech WG2 Quick start guide

FeiYu Tech

FeiYu Tech G3 Steadycam User manual

FeiYu Tech

FeiYu Tech VB 4SE User manual

FeiYu Tech

FeiYu Tech Feiyu-WCP2 User manual

FeiYu Tech

FeiYu Tech SPG User manual

FeiYu Tech

FeiYu Tech G6 Max Installation guide

FeiYu Tech

FeiYu Tech VIMBLE 2A User manual

FeiYu Tech

FeiYu Tech SPG User manual

FeiYu Tech

FeiYu Tech G360 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions