FeiYu Tech A1000 User manual

3-Axis Gimbal for Mirrorless Camera

Guilin Feiyu Technology Incorporated Company

V 1.0ENUser Manual

1. Product Overview

[2] Tilting lock screw

[21] Charging indicator

[4] Camera thumb screw

[13] Shutter cable socket

[3] Sliding arm

[20] Trigger button

[14] Cross arm

[16] Rolling axis

[15] Rolling lock screw

[19] Vertical arm

[23] Handle

[12] Socket connector

[10] Function button

[8] Status indicator

[9] Joystick

[22] USB interface

[24] Retaining ring

[5] Clamping plate thumb screw

[17] Quick-release clamp

[18] Adapter(Clamping plate)

[7] Panning axis

[6] Panning lock screw

[1] Tilting axis

[11] Shutter button

[1]

[4] [5]

[7]

[20]

[21]

[9]

[10]

[2]

[17] [18]

[16]

[19]

[6]

[3]

[22]

[23]

[14]

[13]

[15]

[8]

[11]

[24]

[12]

Included Accessories

After installation, please

tighten the retaining ring

USB cable

4 Batteries

(Type: 18650)

Shutter release

cable for Sony cameras

(3.5 mm to multi port) Smart charger

Cold shoe

Double-hand foldable set (Optional)

Retaining ring

1/4-20

inch screw

Double-hand Accessories

Single Handle

Install the handle

Tripod

Camera

thumb screw

Attach camera or smartphone

Place the camera correctly on the quick-release

clamp and use the camera thumb screw to

secure the camera through the middle chute at

the bottom of quick-release clamp.

18650

2. User Guide

Attention: Please read the following instructions before powering on the gimbal.

Insert the batteries

Remove the handle, insert 2 pcs 18650

batteries and tighten the handle.

Prior to use, please be sure to fully charge the

batteries.

Take the mirrorless camera for example

First use the smartphone adapter (optional) to install the

phone, and place them correctly on the quick-release clamp,

use the camera thumb screw to secure the phone through

the middle chute at the bottom of quick-release clamp.

Install the Gopro HERO 4 camera on a device with a

1 / 4-20 inch threaded hole (equipped by user) and

place them correctly on the quick-release clamp. Use

the camera thumb screw to secure the camera through

the middle chute at the bottom of quick-release clamp.

Take the Gopro HERO 4 camera for example Take the smartphone for example

Balance Adjustment

Turn on the gimbal after adjusting the center of gravity balance of the three axis.(refer to chapter

"9. Balance Adjustment"for more details)

Note: center of gravity imbalance can lead to poor performance or even failure

of the gimbal to operate at all.

Power on/Power oﬀ

Power on：Long press the function button and release it when the green light is on and you hear a tone.

Power oﬀ：

Long press the function button and release it when the red light changes from quick ﬂashing

to constant and you hear a tone.

3. Functions Modes

Trigger button

Lock

Function button

Double tap

Single tap

Function

Triple tap

Reset

Long press

Return to panning mode, tilting and rolling to return to initial level

Explanation

Function Explanation

Panning mode

Panning and Tilting mode Under panning and tilting mode, single tap to switch to panning mode

Rotate 180°in horizontal Make the camera lens rotate 180 °

Single tap to switch to panning mode (Default mode )

Instructions of Button

In the panning mode or panning and tilting mode, press and hold the

button to enter the lock mode, release it to return previous mode

Quadruple tap Enter autorotation mode

Autorotation Mode

Five tap Initialization Enter initialization

In case of low power, the indicator will light red and ﬂash 3 times

every 5 seconds. Please charge gimbal or replace the battery.

The current mode of the gimbal can be identiﬁed

by the indicator status.

Explanation of indicator status

Indicator status Mode / Status

Blue light ﬂashes once

Blue light ﬂashes twice

Panning mode

Panning and Tilting mode

Lock mode / Initialize the gimbalBlue light constant on

Blue light keeps ﬂashing Initialization failure / Malfunction

Low powerRed light ﬂashes three times

Red light keeps ﬂashing Entering power oﬀ

Explanation of joystick control

Function

Button

Shutter

button

Status

indicator

Left

Right

Down

Panning Mode (Default mode )

Panning and Tilting Mode

Lock Mode

Reset

The orientation of the camera is ﬁxed.

Return to panning mode, tilting and rolling to return to initial level.

Tilting and rolling direction are ﬁxed, and the camera lens moves according to the hand movement of the user.

Modes

The rolling direction is ﬁxed, and the camera lens moves according to the hand movement of the user.

3 4

Autorotation Mode

Gimbal speed setting reference table

Annexed parameter table：

8 hours / turn

4 hours / turn

1 hour / turn (default)

30 minutes / turn

15 minutes / turn

2 minutes / turn

4 minutes / turn

8 minutes / turn

30 seconds / turn

24 seconds / turn

18 seconds / turn

12 seconds / turn

1 minute / turn

α1000 Rotate Speed

Other operations：Click the function button to exit the autorotation mode during automatic rotation. The speed setting is made by

Feiyu ON App.

Note: Both the panning and tilting directions can be rotated.

1.Quadruple tap on function

button, gimbal will access the

autorotation mode setting.

Tilting

Panning

2. Turn the panning axis or tilting

axis to the start position and hold

for half a second.Click on function

button, record the start position .

3 .Turn the panning axis or

tilting axis to the end position

and hold for half a second.

Click on the function button

again,record the end position .

4.Gimbal will recover to

start position automatically.

Tilting axis and panning

axis turn to end position

at constant speed.The

gimbal is automatically

reset after the end.

1.Quadruple tap on function button, gimbal will access the autorotation mode .

2. Set the gimbal start rotation position: Pull the tilting axis or panning axis to the start position by hand,click the function button to record.

3. Pull the gimbal (which can be rotated more than one turn) according to the rotation path you want to set, and then click the function

button to record the end position .The gimbal will go to the start position and start the automatic rotation.Using the gimbal autorotation

function with a camera, timelapse photography functioning can be used to achieve special movement timelapse photograpy.

Manual Lock

Hold the camera and change its angle in

tilting axis direction.

Keep this position for half a second, the

current angle will be locked manually.

Adjust the camera by hand to the desired angle and hold in place for half a second to lock in that angle.(The tilting axis

and panning axis in the lock mode can be manual lock and the tilting axis can be manual lock in the panning mode.)

Take the tilting axis as an example :

4. Charging

Photograph

The shutter button can take pictures via the shutter release cable.

Timing photograph: Long press the shutter button 3s or more, gimbal "drop" sound and enter the timing photograph mode,

the default 5s shot once.Single tap the shutter button to exit the timing photograph.

Manual photograph: Click the shutter button to focus, click again within 3s to take pictures.If there is no operation within 3s,

the focus state is cleared.

Status indicator

Charging indicator

Micro USB

Input：5V/1A

（equipped by user）

Explanation of Charging indicator status

Indicator status Mode / Status

Blue light，red light oﬀ

The blue and red light

are ﬂashing

Stop charging

The voltage of two batteries balance ajustment

The blue and red light Charging

（If the two batteries voltage diﬀerence between

the larger, the process takes a long time）

Table of contents

Other FeiYu Tech Camera Accessories manuals

FeiYu Tech

FeiYu Tech FY-G4 Manual

FeiYu Tech

FeiYu Tech SCORP 2 User manual

FeiYu Tech

FeiYu Tech G4 Plus User manual

FeiYu Tech

FeiYu Tech G6 Plus User manual

FeiYu Tech

FeiYu Tech G360 User manual

FeiYu Tech

FeiYu Tech G5 User manual

FeiYu Tech

FeiYu Tech WCP2S User manual

FeiYu Tech

FeiYu Tech SPG User manual

FeiYu Tech

FeiYu Tech vimble 2 User manual

FeiYu Tech

FeiYu Tech VLOG pocket2 User manual

FeiYu Tech

FeiYu Tech SPG LIVE User manual

FeiYu Tech

FeiYu Tech VIMBLE 3 User manual

FeiYu Tech

FeiYu Tech G6 Max User manual

FeiYu Tech

FeiYu Tech AK2000S User manual

FeiYu Tech

FeiYu Tech Feiyu Pocket 2 User manual

FeiYu Tech

FeiYu Tech MiNi 3D User manual

FeiYu Tech

FeiYu Tech SCORP FM1 User manual

FeiYu Tech

FeiYu Tech VIMBLE3 User manual

FeiYu Tech

FeiYu Tech FY G4 User manual

FeiYu Tech

FeiYu Tech SCORP Mini User manual

FeiYu Tech

FeiYu Tech Smart Stab User manual

FeiYu Tech

FeiYu Tech VIMBLE ONE User manual

FeiYu Tech

FeiYu Tech Vimble 2A User manual

FeiYu Tech

FeiYu Tech MiNi 3D User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions

FeiYu Tech a1000 User manual

Popular Camera Accessories manuals by other brands