Fein GSZ11-320PRL Setup guide

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

Repair instructions

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 53

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

Contents

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 2of 53

1. Models described

2. Technical data

3. Notes and requirements

4. Tools required

5. Lubricants and auxiliary substances required

6. Removal

7. Fitting

8. Connection diagram

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

1. Models described

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 3of 53

These repair instructions describe how to repair the following models:

Model Order number

GSZ 11-320 PRL 7 223 21 .. .. .

GSZ 11-320 PERL 7 223 22 .. .. .

GSZ 11-90 PERL 7 223 23 .. .. .

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

2. Technical data

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 4of 53

Technical data

All the technical data can be found in the operating instructions for the model.

Tests

Up-to-date test data and test instructions after repair can be found on the FEIN Extranet (Customer Service → Repair Guides).

Lubricants / Auxiliary substances

The lubricants or auxiliary substances and their container sizes available from FEIN can be found on the FEIN Extranet

(Customer Service → Repair Guides).

Lists of spare parts

Lists of spare parts and exploded views are available online at www.fein.com

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

3. Notes and requirements

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 5of 53

Please note

These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and

electrical training.

Only use original FEIN spare parts.

Provisions

Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in

serious risks to the user.

The provisions set out in DIN VDE 0701-0702 should be observed after repairs.

The relevant accident prevention regulations of the employer’s liability insurance associations are to be observed when

commissioning.

The German Equipment and Product Safety Act [ProdSG] applies for correct use.

Outside Germany, the regulations applicable in the relevant country must be observed.

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

4. Tools required

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 6of 53

Standard tools Special tools

Arbor 13 mm diameter Drawing-off socket cap 6 41 04 150 00 8

Arbor press Pressure piece 6 41 22 003 00 0

Punch 5 mm diameter Assembly aid 6 41 22 121 01 0

Flat material 45 mm x 20 mm x 5 mm Clamping sleeve 19 mm 6 41 07 019 00 7

Open-ended spanner 17 mm; 30 mm

Slide hammer

Sleeve •8 mm inner diameter

12 mm outer diameter

•8 mm inner diameter

19 mm outer diameter

•9 mm inner diameter

21 mm outer diameter

•10 mm inner diameter

25 mm outer diameter

•11 mm inner diameter

16 mm outer diameter

•21 mm inner diameter

26 mm outer diameter

•26 mm inner diameter

40 mm outer diameter

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

4. Tools required

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 7of 53

Standard tools Special tools

Sleeve •80 mm inner diameter

90 mm outer diameter

Inner puller

Socket head wrench 3 mm

Cross-tip screwdriver PH2

Plastic hammer

Circlip pliers

Long-nosed pliers

Torx T15

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

5. Lubricants and auxiliary substances required

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 8of 53

Lubricants

Oil (acid-free) Felt ring

GSZ 11-90 PERL

Grease 0 40 101 0100 4 13 g Housing

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

6. Removal

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 9of 53

Removing the handle

1. Unscrew the six screws (1).

2. Remove the upper section of the handle (2). Tools:

- Torx T15

GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL

6. Removal

C-SC_CSSM

Version 1.0

2015-12-14

FEIN retains all rights of disposal, such as copying and circulation.

Page 10 of 53

Removing the handle

1. Unscrew the screw (1).

2. Remove the cable clamping piece (2).

3. Remove the terminals (3).

4. Open the terminals (4) and remove the cables.

5. Remove the switch (5).

6. Loosen the screws (6) on the switch and remove the cables.

7. Remove the upper section of the handle (7).

Tools:

- Torx T15

- PH2 cross-tip

screwdriver

This manual suits for next models

Table of contents

Popular Power Tools manuals by other brands

AEG

AEG OMNI-JS Original instructions

SIP

SIP 01533 manual

Ribimex

Ribimex PRS499 quick start guide

3M Fiber Optic Connector Crimp Tool instructions

Ryobi

Ryobi P524 Operator's manual

ROJEK

ROJEK FSN 300A manual

Kemper

Kemper 1740PRO manual

WABCO

WABCO OptiTire installation manual

EINHELL

EINHELL TE-MS 18/210 Li Original operating instructions

Orgapack

Orgapack OR-T 85 Operating and safety instructions

TOUGHCUT

TOUGHCUT Diamond 400 instruction manual

Yaros

Yaros PB-3603 user manual

Baileigh Industrial

Baileigh Industrial SS-2725 Operator's manual

Milwaukee

Milwaukee 2674-20 Operator's manual

Princess

Princess Electric Multi Sharpener user manual

FOREDOM

FOREDOM K.1050 Operation & maintenance manual

Blaupunkt

Blaupunkt TIF 30 DA manual

Silca

Silca MARKER 2000 operating manual