Extreme Flight RC Extra 260 67 User manual

Receiver-Ready Aircraft by

67” Assembly Guide

Please read the following paragraphs before beginning assembly of your aircraft!

THIS IS NOT A TOY! Serious injury, destruction of property, or even death may result from the misuse of this

product. Extreme Flight RC is providing you, the consumer with a very high quality model aircraft compo-

nent kit, from which you, the consumer, will assemble a ﬂying model. It is beyond our control to monitor the

ﬁnished aircraft you produce. Extreme Flight RC will in no way accept or assume responsibility or liability for

damages resulting from the use of this user assembled product. This aircraft should be ﬂown in accordance

to the AMA (or alternate appropriate to your region) safety code. It is highly recommended that you join the

Academy of Model Aeronautics in order to be properly insured, and to operate your model at AMA sanc-

tioned ﬂying ﬁelds only (or the appropriate model aviation sanctioning body in your geogrpahical region). If

you are not willing to accept ALL liability for the use of this product, please return it to the place of purchase

immediately.

Extreme Flight RC guarantees this kit to be free of defects in materials and workmanship for a period of 30

DAYS from the date of purchase. All warranty claims must be accompanied by the original dated receipt.

This warranty is extended to the original purchaser of the aircraft kit only.

If you need assistance with your aircraft, please contact the selling dealer. In the United States, please con-

tact us at info@extremeﬂightrc.com or 770-887-1794. It is your responsibility to ensure the airworthiness

of your model.

Required tools and Materials

This Extreme Flight RXR aircraft requires your Transmitter, Receiver, Lipo Battery and any adaptor you need

to connect to your Lipo battery. Your 67” RXR comes with an XT-90 battery connector installed. A variety of

adaptors are availble to convert to nearly any battery connector.

You will also need thin CA glue and basic hand tools. We also recommend a threadlocker, such as Loctite

blue #242.

When using CA glue, if you spill excess glue onto

your airplane, we recommend Acetone (available

at hardware and home improvement stores) and

a paper towel to clean.

Unbox and unwrap all parts, check for any damage. If you need assistance, contact your dealer.

In the United States, contact Extreme Flight RC at the phone number or email address posted

on our website, www.ExtremeFlightRc.com

Attach the landing gear to the fuselage using screws, apply a drop of threadlocker to each screw.

3Slick the horizontal stabilier into the slot in the fuselage. Take your time. Make sure it is right-

side-up, make sure it is fully engaged into the fuselage.

4When you have the horizontal stabilizer fully engaged into the fuselage slot and slid all of the way

forward, apply thin CA glue to the joint as shown, top and bottom. Clean up any spilled CA glue

with acetone and a paper towel. Allow to cure. Locate the tail ller piece. Insert the ller piece to

ll the gap in the tail as shown. Glue with a few drops of thin CA glue. Clean up any spilled glue.

5Remove the rear screw which holds the tailwheel bracket to the fuselage a shown, and swing the

tailwheel to the side.

6Attach the rudder by sliding the rudder hinge wire in from the bottom.

7Straighten and re-attach the tailwheel bracket and replace the screw. Add the tailwheel tiller screw

into the bottom of the rudder as shown. Make sure the tailwheel and rudder move freely together.

8Attach the rudder pushrod to the rudder servo arm as shown, tightening the locking nut on the

back side of the servo arm.

9Attach the elevator pushrod as shown.

10 Remove the propeller by unscrewing the nuts before powering-on your aircra on the work-

bench. Never power up your aircra for programming or service until you remove the prop for

safety.

11 Install your receiver. A capacitor is provided for the ultimate in voltage protection, plug it into

any open channel.

12Install your wings. Install your Lipo battery and check the balance of your airplane. Li the plane

by the fuselage former immediately behind the wing tube. Move your Lipo battery forward or

back until the plane hangs level in this poistion.

This manual suits for next models

Table of contents

Other Extreme Flight Toy manuals

Extreme Flight

Extreme Flight MXS-EXP User manual

Extreme Flight

Extreme Flight VANQUISH MKII User manual

Extreme Flight

Extreme Flight 85" EDGE 540T 50cc ARF User manual

Extreme Flight

Extreme Flight MXS-EXP User manual

Extreme Flight

Extreme Flight TURBO RAVEN EXP User manual

Extreme Flight

Extreme Flight YAK-55SP-Electric User manual

Extreme Flight

Extreme Flight YAK-55SP User manual

Extreme Flight

Extreme Flight LASER EXP ARF User manual

Extreme Flight

Extreme Flight MXS-EXP User manual

Extreme Flight

Extreme Flight slick 580 exp User manual

Extreme Flight

Extreme Flight RC 83 inch MXS ARF User manual

Extreme Flight

Extreme Flight F3A User manual

Extreme Flight

Extreme Flight EDGE 540T EXP User manual

Extreme Flight

Extreme Flight YAK-54 ARF User manual

Extreme Flight

Extreme Flight EXTRA260 User manual

Extreme Flight

Extreme Flight F3A User manual

Extreme Flight

Extreme Flight ARF RC User manual

Extreme Flight

Extreme Flight 104 Laser EXP ARF User manual

Extreme Flight

Extreme Flight 110" YAK-54 V2 User manual

Extreme Flight

Extreme Flight 42 Vyper Bype User manual

Extreme Flight

Extreme Flight 78" EXTRA 300 ARF User manual

Extreme Flight

Extreme Flight focke-wulf FW-190A User manual

Extreme Flight

Extreme Flight EXTRA 300EXP v2 User manual

Extreme Flight

Extreme Flight YAK-54 ARF User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions