EverFocus Eq250 User manual

EVERFOCUS

1/3” Sony CCD Aluminum Box Housing

Color Camera

Operation Instructions

Model No. EQ350/EQ250

Please read this manual first for correct installation and operation. This manual should be retained

for future reference. The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products. All specifications are therefore

subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,

audio speakers since the magnetic fields generate from above devices will distort the video

images.

2. Never disassemble the camera nor put impurities in it.

Disassembly or impurities may result in trouble or fire.

3. Never face the camera toward the sun.

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

4. Keep the power cord away from water and liquid.

Touching the wet power cord may result in electric shock.

5. Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in failure, electric shock or fire.

6. Cleaning

Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from

the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the

camera lens.

7. Do not operate the camera beyond the specified temperature, humidity or

power source ratings.

Use the camera at temperatures within -10°C~50°C (14°F~122°F) and humidity between

20%~ 80%. The input power source are 12VDC/24VAC; 100~240VAC.

PREFACE

The EQ series is a solid-state color video camera specially designed for high quality surveillance

applications. It incorporates break through DSP technology that provides most reliable and

accurate color picture in security industry. The camera is compatible with C-mount or CS-mount

lenses and come with an easy back-focus adjustment for user-friendly installation.

FEATURES

Industry leading super high-res. with 560 TVL (EQ350 model), 380TVL(EQ250)

Revolutionary integrated 10-bit Digital Signal Processor (DSP) delivers sharp color images

and excellent picture quality

Wide range automatic electronic shutter: 1/60 (1/50) ~ 1/100,000

Auto line lock with external phase adjustment

C/mount or CS-mount adjustable with easy back-focus adjustment wheel on the camera

Smart FL mode for fluorescent light or 1/100 sec (NTSC)

Utilizing innovative Pure Vision Technology

STANDARD ACCESSORIES

¾Camera Unit x 1

¾Accessory Pack includes

Mounting Base for bracket

M2 Screws x 4 for fixing mounting base

Lens Plug Connector

¾Manual x 1

SPECIFICATIONS

Type EQ350 EQ250

Pickup Device 1/3'' SONY Super HAD CCD

Picture Elements NTSC: 768(H) x 494(V)

PAL: 752(H) x 582(V)

NTSC: 510(H) x 492(V)

PAL: 500(H) x 582(V)

Video Format NTSC or PAL

Scanning System NTSC: 525 TV lines, 60 fields/sec

PAL: 625 TV lines, 50 fields/sec

Horizontal Resolution 560TVL 380TVL

Sensitivity 0.5Lux/F=1.2 0.3Lux/F=1.2

S/N Ratio Over 48dB(AGC off)

Electronic Shutter 1/50(1/60)~1/100,000

Lens Type C/CS mount

Video Drive / Direct Drive

Back Light Comp. ON/OFF Switch

Auto Gain Control ON/OFF Switch

Fluorescent Light ON/OFF Switch

Auto White Balance Yes

Gamma Correction 0.45

Video Output BNC 1.0Vp-p , 75ohm

Sync. Mode Line Lock/Internal Sync

Power Source

2 types:

100VAC~240VAC

12VDC/24VAC

Power Consumption

100VAC~240VAC 12W max

24VAC 7W max

12VDC 4.5W max

Dimensions 57(W) X 51(H) X 140.2(D) mm;

2.25"(W) X 2"(H) X 5.52"(D)

Weight 0.5kg ; 1.1lbs

Operating Temperature -10°C~50°C ; 14°F~122°F (20%~80% Humidity)

Certification FCC,CE

DIMENSIONS

HARDWARE OVERVIEW

Front

Side

Back

Side

10 11

Dual Power Model with Audio

Pigtail Power Model with Audio

Pigtail Power Model without Audio Dual Power Model without Audio

1. C/CS mount Focus Switch Ring

Use this ring to adjust the appropriate focal length according to the type of lens. Rotate the

ring clockwise for the CS-mount lens, rotate it counterclockwise for the C-mount lens. The

factory setting is CS-mount.

2. Lens Mount

To mount an appropriate C-mount or CS-mount lens.

3. Locking Screw

Use the locking screw to fix the focal length for preventing losing focus.

4. DC Lens Connector (4 pin socket)

To connect to the lens plug of the auto iris lens.

5. Camera Setting DIP Switches

There are 6 DIP switches located on the sideboard, which are for camera setting. The

switches in order from top is Flickerless, Back Light Compensation, Electronic Shutter,

Automatic Gain Control, Line-Lock and Auto Iris Lens type. Please see camera DIP

switch setting section.

6. IRIS Level Control

Brightness Level can be adjusted from the IRIS level VR while using the direct drive lens.

Turn counterclockwise to L to get darker picture.

Turn clockwise to H to get brighter picture.

7. V-Phase Adjustment Screw

The vertical phase may require adjustment to synchronize the vertical phase of the camera

with other camera in the system when it is being used in the line-lock sync mode. Make the

adjustment when the vertical phase of the camera does not match with other cameras.

8. Mounting Base and Fixing Screws

The mounting base can be attached to either the top or the bottom of the camera, fix the

mounting base onto the camera by using the 4 fixing screws in the accessory pack.

9. Video Output Connector

BNC VBS 1.0 Vp-p, 75ohm

10. Power Cable (EQ series)

Power cable varies in different model

11. Power Pigtail Cable / Power Terminal Pin (EQ series ”A”)

It varies in different models.

12. Audio Output (optional)

It varies in different models, RCA connector

INSTALLATION

1. Remove the lens cover cap.

2. If a C-mount lens is used, please make sure to turn the C-mount/CS-mount focus switch ring

at C position before fixing the lens.The default is CS mount.

3. Screw the lens firmly onto the lens mount. Insert the lens plug into the DC lens connector if

the auto iris lens is used.

4. Tighten the focus locking screw.

5. Connect the video output of the camera to a color monitor or other video device through a 75

ohm type coaxial cable with BNC female connector.

6. Connect the Power.

7. Once the image appears on the monitor, adjust the focus and diaphragm of the lens to obtain

the best picture.

8. If the subject is not in focus when adjusting focus of lens, turn the C-mount/CS-mount focus

switch ring to do focal length adjustment as following:

i. Loosen the locking screw of the focal length adjustment ring.

ii. Take picture of subject at a distance more than 20m away from the camera.

iii. Rotate the focal length adjustment ring to bring the subject in focus.

iv. Tighten the locking screw while the adjustment is completed.

Camera Setting DIPSwitch

Fluorescent ON/OFF

This is a compensation function for against the images flicker fiercely during fluorescent light

condition. Shooting the images in fluorescent light by using turn on the Fluorescent function,

the default setting is Off.

BLC (Back Light Compensation) ON/OFF

When BLC is turned on, the AGC, ES and IRIS operating point is determined by averaging over

the center area instead of entire field-of-view, so that a dimly-lit foreground object at center area

can be clearly distinguished from brightly-lit backgrounds.

BLC should not be used unless it is needed to compensate for back-lit. The default setting is OFF.

ES (Electronic Shutter) OFF/ON

ES ON: The camera continuously adjusts the shutter speed from 1/60 (NTSC), 1/50 (PAL) second

to 1/100,000 second according to the luminance conditions of the scene.

ES OFF: The shutter speed is fixed at 1/60 (NTSC), 1/50 (PAL) second.

Set ES OFF, when auto iris lens is used or flicker is observed under a very bright fluorescent lamp.

Otherwise, turn ES on for optimum performance. The default setting is ON.

AGC (Automatic Gain Control) OFF/ON

AGC ON: The sensitivity increases automatically when light is low.

AGC OFF: A-low-noise picture is obtained under a low light condition.

The default setting is ON.

LL (Line-Lock) OFF/ON

To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on).

Set the line-lock off, the camera will synchronize to the internal time base. Set the line-lock on,

the camera’s vertical synchronization can be driven by the AC signal in the power lines.

Note: The cameras feature AC line lock for external synchronization, using the AC power

frequency (60Hz) is possible but not available in using DC or other operation power such as

NTSC in 50Hz or PAL in 60Hz power system.

VD/DD (Auto Iris lens Type)

For video drive auto iris lens, please set switch to VD. For direct drive iris lens, set switch to DD.

The default setting is DD. Wire the cable of lens to lens connector according to the following

table.

Pin1 Pin2 Pin3 Pin4 Lens Connector

Video Drive +12V GND VD-IRIS GND

DirectDrive Cnt- Cnt+ Drv+ Drv-

Other manuals for Eq250

This manual suits for next models

Table of contents

Other EverFocus Security Camera manuals

EverFocus

EverFocus EZ-PLATECAM2 User manual

EverFocus

EverFocus ECZ 330 Owner's manual

EverFocus

EverFocus 350HQ User manual

EverFocus

EverFocus EMB935F User manual

EverFocus

EverFocus ECD900B User manual

EverFocus

EverFocus ED350 User manual

EverFocus

EverFocus EAN-1350 Guide

EverFocus

EverFocus ED300 Series User manual

EverFocus

EverFocus Polestar EZN7221 User manual

EverFocus

EverFocus EDH5240 User manual

EverFocus

EverFocus 380TVL, 520TVL User manual

EverFocus

EverFocus EQ610 User manual

EverFocus

EverFocus ECMD100i Technical manual

EverFocus

EverFocus EAN7360 User manual

EverFocus

EverFocus EDH5210B User manual

EverFocus

EverFocus EHN Series User manual

EverFocus

EverFocus EZ350 User manual

EverFocus

EverFocus EBA1240 eZ.HD Series User manual

EverFocus

EverFocus H.265 VANGUARD II Series User manual

EverFocus

EverFocus H.265 VANGUARD II Series User manual

EverFocus

EverFocus M117-N701-001 User manual

EverFocus

EverFocus EHD650 User manual

EverFocus

EverFocus EZH5040 Technical manual

EverFocus

EverFocus EBN288/368 User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications