Eve Audio ThunderStorm TS110 User manual

EVE AUDIO PRODUCT MANUAL

TS110

TS112

NOV 2015

TS110

TS112

SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. DO NOT install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wider blade or the third prong are provided for your safety. If the provided

plug does not t into your outlet, consult an electrician for replacement of

the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. ONLY USE attachments/accessories specied by the manufacturer.

12. USE ONLY with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-

over.

13. UNPLUG this apparatus during lightning storms or when unused for long

periods of time.

14. REFER all servicing to qualied service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

EVE Audio product manual

15. To reduce the risk of re or electric shock, do not expose this apparatus

to rain or moisture. The apparatus shall not be exposed to dripping or

splashing and that objects lled with liquids, such as vases, shall not be

placed on apparatus.

16. Where the MAINS plug or an appliance coupler is used as the disconnect

device, the disconnect device shall remain readily operable.

17. DO NOT overload wall outlets or extension cords beyond their rated

capacity as this can cause electric shock or re.

18. No naked ame sources, such as lighted candles, should be placed on the

apparatus.

19. Minimum distances around the apparatus for sucient ventilation.

20. The ventilation should not be impeded by covering the ventilation

openings with items, such as newspapers, table cloths, curtains, etc.

21. Correct Disposal of this product. This marking indicates that this

product should not be disposed with other household wastes

throughout the EU. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources. To

return your used device, please use the return and collection systems or

contact the retailer where the product was purchased. They can take this

product for environmental safe recycling.

22. The lightning ash with arrowhead symbol within an equilateral

triangle is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’ s enclosure that may be

of sucient magnitude to constitute a risk of electrical shock to persons.

23.

The exclamation point, within an equilateral triangle, is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the product.

24.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION

AVIS : RISQUE DE CHOC ÉLECTRIQUE – NE PAS OUVRIR.

WARNING: Do Not Open! Risk of

Electrical Shock. Voltages in this

equipment are hazardous to

life. No user-serviceable parts

inside. Refer all servicing to qualied service personnel. Place the

equipment near a main power supply outlet and make sure that you can

easily access the power breaker switch.

TS110

TS112

25. WARNING: This product is intended to be operated ONLY from the AC

Voltages listed on the back panel or included power supply of the product.

Operation from other voltages other than those indicated may cause

irreversible damage to the product and void the products warranty. The

use of AC Plug Adapters is cautioned because it can allow the product

to be plugged into voltages in which the product was not designed to

operate. If the product is equipped with a detachable power cord, use only

the type provided with your product or by your local distributor and/or

retailer. If you are unsure of the correct operational voltage, please contact

your local distributor and/or retailer.

EVE Audio product manual

TABLE OF CONTENT

1. INTRODUCTION ............................................................................6

2. QUICK START.................................................................................7

2.1. First Steps.............................................................................................................................7

2.2. Subwoofer Connection...................................................................................................7

2.3. Powering On .......................................................................................................................7

3. OPERATION ...................................................................................8

3.1. First Steps.............................................................................................................................8

3.2. Operating Modes ..............................................................................................................9

3.3. Powering on/o: Standby Mode .................................................................................9

3.4. Volume Mode .....................................................................................................................9

3.5. Settings Menu ................................................................................................................. 11

3.6. Filter .................................................................................................................................... 11

3.7. Sat. Filter............................................................................................................................ 11

3.8. Sub Filter ........................................................................................................................... 12

3.9. Sub Phase.......................................................................................................................... 12

3.10. LED Mode.......................................................................................................................... 12

3.11. Saving Your Settings ..................................................................................................... 13

3.12. Remote Control............................................................................................................... 13

3.13. Power Switch ................................................................................................................... 14

3.14. DIP Switches..................................................................................................................... 15

3.15. Mains Voltage Selector................................................................................................. 15

3.16. Power Connector (IEC) ................................................................................................. 15

4. POSITIONING ..............................................................................17

4.1. Subwoofer Positioning................................................................................................. 17

4.2. Height and Distance ..................................................................................................... 17

4.3. Stereo Setup + Subwoofer (2.1)................................................................................ 18

4.4. Multichannel Setup (5.1) ............................................................................................. 19

4.5. Room Acoustics .............................................................................................................. 20

5. TECHNICAL SPECIFICATIONS .....................................................21

6. COMPLIANCE...............................................................................22

7. WARRANTY..................................................................................23

TS110

TS112

6INTRODUCTION

1. INTRODUCTION

Thank you for your time and interest in the EVE Audio product range.

EVE Audio is a loudspeaker manufacturer based in Berlin, Germany, that

specializes in the development and design of unique studio monitors.

The use of rst-class components is our highest priority because we rmly

believe this is the only way to manufacture rst-class products.

You have chosen a TS110 or TS112 subwoofer from our ThunderStorm

series. Both modelsmake use of passive radiators instead of a bass reex

port. This allows for a lower tuning of the subwoofer and avoids the

emergence of hum, which is unavoidable when applying the bass reex

port design. The passive radiator is on the bottom side of the subwoofer.

The subwoofers of the ThunderStorm series are the ideal extension for the

two, three and four-way systems of the EVE Audio SilverCone series. They

can be easily integrated in any situation thanks to their ThunderStorm

Chassis (10” or 12”), PWM ampliers (250 and 400 Watt), accurate DSP

technology and IR remote control.

We wish you a lot of fun with your EVE Audio subwoofer. If you have any

questions regarding our products, do not hesitate to contact your nearest

dealer or get directly in touch with us... We will be more than happy to help

you out!

All the best from Berlin.

The EVE Audio Team

EVE Audio product manual

Powering On

QUICK START

2. QUICK START

If you already have experience with studio subwoofers, the Quick Start

guide ought to be more than enough to get you started.

For unexperienced users we recommend reading the whole user’s manual

in order to prevent any misuse.

2.1. First Steps

Check the package components (loudspeaker, remote control + batteries,

user’s manual, power cord).

Check the voltage setting (see “Mains Voltage Selector”).

Check the setting of the DIP Switches (variable).

2.2. Subwoofer Connection

Connect the two inputs on the rear side (L In + R In) to the left and right XLR

outputs of a playback source, for instance, an audio interface. The output

level should be as low as possible.

Connect the two outputs on the rear side (L Out + R Out) to the

corresponding XLR inputs of your studio’s left and right satellites. All

output levels should be as low as possible.

2.3. Powering On

Engage the Power switch on the rear side of the subwoofer to turn it on

or o.

The LEDs around the System Volume control on the front panel will light

up clockwise. If the LED on the right end is dimly lit, this indicates that the

subwoofer is in Standby mode. Press the System Volume control to turn

the subwoofer on. If you turn the System Volume control counter clockwise

until the LED on the left end lights up dimly the subwoofer will be muted.

Increase the output level on the source device until the LED ring starts to

blink, then reduce the output level a bit. The maximum operating level

for the input (i.e. the analog to digital converter) is now set optimally. To

set the desired listening volume use the System Volume control on the

subwoofer. The LED ring indicates the volume setting. If the LED ring starts

to blink, reduce the output level on the signal source.

TS110

TS112

First Steps

8OPERATION

3. OPERATION

3.1. First Steps

Rear Connections & DIP Switches

Check the package components (loudspeaker, remote control + batteries,

user’s manual, power cord).

Check the voltage setting (see “Mains Voltage Selector”).

Check the setting of the DIP Switches (variable).

Connections: there are XLR input and output connectors on the rear side

that allow the connection of balanced and unbalanced devices (signal

sources, active monitors, etc.).

•Balanced XLR pin assignment XLR: 1= Shield, 2= hot (+), 3= cold(-).

•Unbalanced XLR pin assignment XLR: 1+3= Shield, 2= Signal.

Depending on the setting of the Max. Input DIP switch on the rear panel,

the maximum level of the source signal should not exceed +7 dBu or +22

dBu (see Max. Input). If the input is overloaded the LED ring will start

blinking.

EVE Audio product manual

Volume Mode

OPERATION

3.2. Operating Modes

Standby mode | Volume mode (-10dB) | Settings menu (Sub Filter @ 100 Hz)

3.3. Powering on/off: Standby Mode

Press and hold the System Volume control three seconds in order to put the

subwoofer in Standby mode. The total volume (subwoofer + satellites) will

decrease gradually while the LED ring lights up once around the System

Volume control. Afterwards, the LED on the right end will remain dimly lit

and the power consumption is reduced to 1 watt.

!To exit the Standby mode press briey the System Volume control once

again. The level will increase gradually until it reaches the previously

selected volume.

3.4. Volume Mode

•Level Adjustment

The maximum input level for balanced and unbalanced signals is +7dBu

or +22 dBu, depending on the position of the Max. Input switch on the rear

panel (see DIP Switches). Higher levels at the input produce distortion due

to the overloading of the analog to digital converter.

Given that some professional studio devices can produce in excess of

+22 dBu, the LED ring will start blinking whenever the AD converter is

overloading. Generally speaking, the +7dBu setting ought to be suitable. If

that is the case, the output level of the source should be reduced.

•Total Volume Adjustment

Turn the System Volume control to adjust the total volume (subwoofer

+ satellites). Depending on the LED mode selected (see LED mode), the

volume will be displayed as a dim/bright circle or as a dim/bright point.

•Subwoofer Volume Adjustment

Turn the Subwoofer Volume control to adjust the volume of the subwoofer

independently from the satellites. This allows you to strike the right

balance between subwoofer and satellites. The LED ring indicates the

volume setting.

TS110

TS112

Volume Mode

10 OPERATION

-80 dB 0 dB

-8 dB

-12 dB

-20 dB

-48 dB

1 Step = 2 dB

(1 LED = 4 Steps)

1 Step = 1 dB

(1 LED = 4 Steps)

1 Step = 0.5 dB

(1 LED = 4 Steps)

1 Step = 0.5 dB

(1 LED = 4 Steps)

1 Step = 0.5 dB

(1 LED = 2 Steps)

Both controls feature the exact same response curve, which is not linear.

The increments become ner as the volume increases:

-80dB (minimum) to -48dB: 2dB

-48dB to -20dB: 1dB

-20dB to 0dB (maximum): 0.5dB

•Subwoofer Mute

To Mute the subwoofer, press briey the Subwoofer Volume control. All

LEDs will turn o, except for the left-most LED, which lights up dimly.

!To exit the Subwoofer Mute mode press the Subwoofer Volume control

once again. The subwoofer will return to the volume level it had before

being muted.

•System Mute

To Mute the whole system (subwoofer + satellites), turn the System Volume

control counter clockwise until you reach the minimum level. When the

LED on the left end of the System Volume control lights up dimly the Mute

mode is activated.

!To exit the System Mute mode simply turn the System Volume control

clockwise until you reach the desired volume.

This manual suits for next models

Table of contents

Other Eve Audio Speakers manuals

Eve Audio

Eve Audio SC3070 User manual

Eve Audio

Eve Audio SC4070 User manual

Eve Audio

Eve Audio SC204 User manual

Eve Audio

Eve Audio sc3010 User manual

Eve Audio

Eve Audio SC204 User manual

Eve Audio

Eve Audio SC407 User manual

Eve Audio

Eve Audio SC207 User manual

Eve Audio

Eve Audio SC Series User manual

Eve Audio

Eve Audio SC305 User manual

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide