EUROPRO Shark 101-548 User manual
INSTRUCTION MANUAL
Model 101-548
EURO-PRO Operating LLC: 94 Main Mill Street, Door 16, Plattsburgh, NY 12901 Tel.: 1 (800) 361-4639
4400 Bois Franc, St. Laurent, Quebec H4S 1A7 Tel.: 1 (800) 361-4639
101-548
PREFACE
Thank you for your purchase of this serger. This machine intended for household use will provide you with
excellent performance in sewing from light to heavy material (lawn to denim). Please refer to this booklet for
proper use and optimum service. To get the most from your sewing machine, read the entire Instruction Manual
before attempting to operate the machine. Then familiarize yourself with the machine, by following the
Instruction Manual page by page.
To ensure that you are always provided with the most modern sewing capabilities, the manufacturer reserves
the right to change the appearance, design or accessories of this serger when considered necessary without
notification or obligation.
1
IMPORTANT SAFETY INSTRUCTIONS
When using this machine, basic safety precautions should always be followed including the
following. Read all instructions be fore using th e machine.
DANGER - To reduce the risk of electric shock:
• The machine should never be left unattended when plugged in. Always unplug the machine from the electric
outlet immediately after using and before cleaning.
•Always unplug before relamping. Replace bulb with the same type rated 15 watts. Be sure to replace the face
plate which covers the light bulb before operating the machine.
- To reduce the risk of burns, fire, electric shock or injury to persons:
• Be sure that the electrical voltage of the electrical outlet (wall receptacle) is the same as the rated voltage of the motor.
•Use this machine only for its intended use as described in this instruction manual. Use only attachments recommendedby
the manufacturer as contained in the instruction manual.
• To disconnect turn all controls to the off (“O”) position, then remove plug from outlet.
• Disconnect the power line plug from the socket outlet or switch the machine off when making any adjustments in the area,
such as threading needle and loopers, changing needle, changing throat plate or changing presser foot, etc.
• Always unplug the machine from the electrical outlet when removing covers, lubricating, or when making any other user
servicing adjustments mentionedin the instruction manual.
•Do not attempt to adjust the motor belt. Contactyour nearestService Center should anyadjustment be required.
•Do notunplug by pulling on cord. To unplug, grasp the plug,notthe cord.
•Handle the foot controller with care and avoid dropping it on the floor. Be sure notto place anything on top of it.
•Always use the proper throat plate. Thewrong plate can cause the needle to break.
•Do notuse bent needles.
•When sewing, keep fingers away from all moving parts. Special care is required around the sewing machine needle.
•Do notpull or push fabric while stitching. It may deflect the needle causing it to break.
•For double insulated machines,when servicing use onlyidenticalreplacement parts. See instructions for Servicing of
Double-Insulated Appliances.
• Use only the handle to lift and move the machine.
•Ne ver operate the machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the machine to the nearest authorized dealer or Service Center for examination,
repair, electrical, or mechanical adjustment.
•Ne ver operate the machine with any air openings blocked. Keep ventilation openings of the machine and foot controller
free from the accumulation of lint, dust and loose cloth.
•Ne ver drop or insert any object into any opening.
•Do not use outdoors.
•Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
•Do not allow to be used as a toy. Close attention is necessary when the machine is used by or near children.
•Do not expose the machine or machine plastic case to sunlight directly. Also do not keep It in a very warm or damp
place.
•Do not touch the machine, foot controller and power line cord with wet hand, wet cloth or with anything wet.
•Do not connect power line cord to one of the many cords connected to one power outlet with adapters.
• Use machine on a flat and stable table.
• Be sure to close the cylinder cover and looper cover before operating the machine.
• Keep presser foot and needles away from children’s reach.
• Be sure the light bulb has cooled off before changing with a new one.
• Do not dismantle or modify the machine yourself.
• Be sure to turn off the power switch and disconnect the power line plug before caring for your machine as instructed in the
instruction manual.
• The motor will work normally under the following condition: height above sea level less that 1000m; environment
temperature range -10 °C - 40 °C; environment humidity less than 90% (at 25 °C) and will run 500 hours under rated
voltage / frequency and rated load (ON 7.5s, OFF 7.5s).
SAVE THESE INSTRUCTIONS
Servicing should be performed by an authorized service representative.
This product is intended for household use only.
POL AR AIZED PLUG INSTRUCITONS
WARNING: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way.
2
WARNING:
Rev. 10/05
CONTENTS
3
Selection Of Stitches ..................................................... 4
Handy Reference Chart .................................................. 5
Accessories .................................................................. 6
Needle Information ........................................................ 6
Principal Parts ............................................................... 7
How To Open Front Cover ............................................. 8
Principal Parts Behind Front Cover ............................... 8
Preparation Prior To Sewing .......................................... 8
Attaching And Removing The Waste Container ............ 9
How To Remove And Insert The Needles ..................... 10
How To Attach And Remove The Presser Foot ............. 11
Preparing The Serger for Threading .............................. 12
Threading The Machine ................................................. 13
Threading The Upper Looper ......................................... 13
Threading The Lower Looper ......................................... 14
Threading The Right Needle .......................................... 16
Threading The Left Needle ............................................. 17
How To Change The Threads .......................................... 18
How To Adjust The Stitch Length ..................................... 19
How To Adjust The Seam Width ...................................... 19
How To Adjust The Presser Foot Pressure ..................... 20
Differential Feed .............................................................. 20
Gathered Overedge ........................................................ 21
Free Arm Sewing ............................................................ 22
Standard Overedge And Rolled Hem Stitching .............. 23
Chaining Off And Test Sewing ....................................... 24
Suggested Tension Settings .......................................... 25
- 2-Thread Warped Edge Overlock .......................... 25
- 2-Thread Overedge ................................................ 26
- 3-Thread Overlock ................................................. 27
- 3-Thread Flatlock ................................................... 28
- 3-Thread Wrapped Edge Overlock ........................ 29
- 3-Thread Ultra Stretch Mock Safety Stitch ............ 30
- 4-Thread Ultra Stretch Mock Safety Stitch ............ 31
How To Sew a Rolled Hem ........................................... 32
- 3-Thread Standard Rolled Hem Stitching .............. 33
- 3-Thread Upper Looper Thread Wrapped
Rolled Hem Stitching .............................................. 33
- 2-Thread Standard Rolled Hem Stitching .............. 34
- 2-Thread Upper Looper Thread Wrapped
Rolled Hem Stitching ............................................. 34
- To Secure The Rolled Hem Thread Chain ............ 35
How To Sew a Flatlock Decorative Seam .................... 36
Decorative Flatlocking .................................................. 37
How To Sew An Overlock Blind Seam ......................... 38
How To Sew Pin Tucks ................................................ 39
Turning Square Corners .............................................. 40
- How To Sew Outside Corners .............................. 40
- How To Sew Inside Corners ................................. 41
Pin Placement .............................................................. 42
Securing The Thread Chain ......................................... 42
Reinforcing A Seam ...................................................... 42
Braiding By Chaining Off .............................................. 43
Machine Maintenance ................................................... 44
- How To Clean The Machine ................................... 44
- How To Oil The Machine ........................................ 44
- How To Change The Stationary Knife .................... 44
- How To Change The Light Bulb .............................. 45
Optional Accessories ..................................................... 46
Touble Shooting ............................................................. 47
Comparison Chart Of Sewing Materials,
Threads And Needles .................................................... 48
Specifications ................................................................ 49
Warranty ........................................................................ 50
SELECTION OF STITCHES
This machine is capable of producing various types of stitches according to the combination of needle positions,
threading methods, tension adjustment, and use of convertible right looper/spreader
* Depending on the needle positions used, this machine can sew 2-thread and 3-thread combinations with width of 3.5mm overedge
and a 5.7mm wide overedge seams.
For overedging heavyweight fabrics, the seam width can be increased still more by turning the overedge seam width adjustment
knob. (See page 28)
BlueGreenNeedle Thread Tension Dial
Overedge left needleOveredge right
needle
Needle Used
5.7mm
3.5mmOveredge Width
BlueGreenNeedle Thread Tension Dial
Overedge left needleOveredge right
needle
Needle Used
5.7mm
3.5mmOveredge Width
Page #
Stitch Type
29
1-needle 3-thread stitch is used for sewing
narrow rolled hems or ornamental edges. Also,
a 3.5mm and 5.7mm wrapped overlock seam
width can be obtained by changing the needle
position.*
5. Three-thread
Wrapped Edge
Overlock
30
2-needle 3-thread stitch which is ideal for
lightweight, extremely stretch fabrics such as
tricot and spandex.
6. Three-thread
Ultra-Stretch Mock
Safety Stitch
31
2-needle 3-thread stitch which is ideal for
medium to heavy weight stretchy fabrics such
as double knits and swim wear.
7. Four-thread Ultra-
Stretch Mock
Safety Stitch
28
1-needle 3-thread stitch is used for butted or
lapped seams and ornamental stitching with
decorative thread. Also, a 3.5mm and 5.7mm
flatlock width can be obtained by changing the
needle position.*
4. Three-thread
Flatlock
27
1-needle 3-thread stitch is used for overedging
and seaming on common fabrics. Also a 3.5mm
and 5.7mm overlock seam width can be
obtained by changing the needle position.*
3. Three-thread
Overlock
26
1-needle 2-thread stitch is used for overedging
common fabrics. It is also ideal for flatlock
(butted or lapped) seams and blind hemming.
Also, a 3.5mm and 5.7mm overedge seam width
can be obtained by changing the needle
position.*
2. Two-thread
Overedge
25
1-needle 2-thread stitch is used for seaming
lightweight or stretch fabrics. Also ideal for rolled
hemming. Also, a 3.5mm and 5.7mm overlock
seam width can be obtained by changing the
needle position.*
1. Two-thread
Wrapped Edge
Overlock
4
2.0
1.0
2.52.0
2.0
7.0
7.0
0.5
0.5
3.0
Looper3.0
5.7mm
6.0
5.5
5.0
5.50.5
Looper0.5
5.7mm
2.0
2.0
2.5
2.53.0
Looper2.5
5.7mm
6.0
6.0
0.5
0.5
5.7mm
1.0
1.5
3.0
3.0
5.7mm
Four-Thread
Ultra-Stretch
Mock Safety
Stitch
Three-Thread
Ultra-Stretch
Mock Safety
Stitch
Three-Thread
Wrapped Edge
Overlock
Three-Thread
Flatlock
Three-Thread
Overlock
Two-Thread
Overedge
Two-Thread
Wrapped Edge
Overlock
YellowOrangeGreenBlue
31
Looper2.5
7
30
3.0
6
29
Looper
3.5mm
5
28
Looper
3.5mm
4
27
Looper
3.5mm
3
26
3.5mm
2
25
3.5mm
1
Page
Upper
Looper or
Tension Dial; Numbers shown are average
settings on medium weight fabric with
standard #80 polyester spun thread
Needle
PositionStitch Type
•For 4-thread M/C
The thread tension becomes tighter as the dials are turned to higher numbers. The tension settings shown on this page
as well as throughout the operator’s manual are suggested guides. Adjust thread tensions to suit the fabric and size of
thread used. For best results make tension adjustments in small increments of no greater than half a number at a time
5
HANDY REFERENCE CHART
Converter
Converter
Converter
Converter
Converter
Converter
NEEDLE INFORMATION
Accessories are contained in the accessory compartment
on the side of the machine.
1
1
1
1
1
4
1
1
1
1. Needle set
2. Screw driver (large size)
3. Screw driver (small size)
4. Tweezers
5. Brush
6. Knife (stationary)
7. Thread unwider spool cap
1
1
2
1
1
1
unwider spool cap
This overlock uses a flat shank domestic needle that
eliminates the possibility of inserting the needle backwards.
Do not attempt to use an industrial sewing machine
needle of any size or type in this overlock.
Needle size 14 is furnished with the machine. Regular point
needles for sewing woven fabrics and ball point needles
are available for sewing knits. Both types are available in
sizes 10, 12 & 14.
Refer to the chart on page 65 for selecting the correct
needle for your sewing projects.
.
.
.
.
ACCECSSORIES
Sewing
Surface
Accessory
Compartment
10
12
14
10
12
14
Sizes
available
Ball Point
Knit
Regular Point
Woven
10
12
14
10
12
14
Sizes
available
Ball Point
Knit
Regular Point
Woven
101-548
8. 2 Thread adapter
9. Foot control
10. Machine cover
10
6
PRINCIPAL PARTS
1. Thread Guides & Holder
2. Carrying Handle
3. Lower Looper Thread Tension Dial (Yellow)
4. Upper Looper Thread Tension Dial (Orange)
5. Right Needle Thread Tension Dial (Green)
6. Left Needle Thread Tension Dial (Blue)
7. Needle Plate
8. Sewing Table
9. Front Cover
10. Differential Feed Adjusting Lever
11. Power “On” & Light Switch
12. Handwheel
13. Stitch Length Dial
14. Spool Stand
15. Cone Adapter
16. Spool Pin
17. Presser Foot Lifter
18. Accessory Compartment
19. Waste Container
7
HOW TO OPEN LOOPER COVER (Fig. 1)
PREPARATION PRIOR TO SEWING
(Fig. 3)
PRINCIPAL PARTS BEHIND LOOPER
COVER (Fig. 2)
Caution:
Be sure to turn the “On/Off” switch to the “Off”
position.
1. Push the cover to the right as far as it will go.
(A)
2. Pull the cover down towards you. (B)
Caution:
Be sure the looper cover is closed when sewing.
1. Upper looper
2. Movable upper knife
3. Presser foot
4. Stationary lower knife
5. Lower looper
6. Seam width finger knob
7. Seam width control dial
1. Connect the controller “A” to the machine
receptacle “B”.
2. Plug in the power line “C” into electrical
outlet “D”.
3. Power Switch: Push “ - ” mark side to
turn “ON”.
4. Press the foot controller to start sewing.
5. The harder you press, the faster the
machine will sew.
6. To stop the machine from sewing, remove
your foot from the foot controller.
Fig. 1
Fig. 2
Fig. 3
Warning:
Use only the foot controller provided with this machine.
Warning:
. Be sure that the electrical voltage of the electrical outlet (wall receptacle)
is the same as the rated voltage on the motor.
. Handle the foot controller with care and avoid dropping it on the floor.
Be sure not to place anything on top of it when not is use.
. Disconnect the power cord plug from the electrical outlet when changing
needles, presser feet or needle plate, or when leaving the machine
unattended for any period of time. This eliminates the possibility of
starting the machine by accidentally pressing the foot controller.
8
ATTACHING AND REMOVING THE
WASTE CONTAINER
Attaching the Waste Container
1. Insert the upper tabs “A” on the waste container into
slots “B” in the front cover. (Fig. 1)
2. Push the lower end of the waste container until the
lower tabs “C” snap into slots “D” in the front cover.
(Fig. 2)
Removing the Waste Container
1. To remove the waste container, hold it and pull the
lower end of the waste container outward until the
lower tabs are free of the slots. (Fig. 3)
Fig. 1
Fig. 2
Fig. 3
9
Table of contents
Other EUROPRO Sewing Machine manuals
EUROPRO
EUROPRO 8660 User manual
EUROPRO
EUROPRO 6130A LCD User manual
EUROPRO
EUROPRO Dressmaker 998B User manual
EUROPRO
EUROPRO 7130 User manual
EUROPRO
EUROPRO 6131A User manual
EUROPRO
EUROPRO 8260 User manual
EUROPRO
EUROPRO 9025 User manual
EUROPRO
EUROPRO 8660 User manual
EUROPRO
EUROPRO 415QV User manual
EUROPRO
EUROPRO 6130A User manual
EUROPRO
EUROPRO 8630M User manual
EUROPRO
EUROPRO 605D User manual
EUROPRO
EUROPRO 6130 User manual
EUROPRO
EUROPRO 420 User manual
EUROPRO
EUROPRO 8260 User manual
EUROPRO
EUROPRO 9110 User manual
EUROPRO
EUROPRO Dressmaker.PLUS 970C User manual
EUROPRO
EUROPRO 416 User manual
EUROPRO
EUROPRO 6130A LCD User manual
EUROPRO
EUROPRO 416 User manual
