eufy Security T8900 User manual
Quick Start Guide
Entry Sensor
Anker Innovations Limited. All rights reserved. eufy and the eufy logo are
trademarks of Anker Innovations Limited, registered in the United States
and other countries. All other trademarks are the property of their respective
owners.
5100500xxxx V01
Kurzanleitung | Guía de inicio rápido
Guide de démarrage rapide | Guida di avvio rapido
English 01
For Entry Sensor Installation:
Entry Sensor
(T8900)
Sensor Magnet CR123A Battery Mounting Screws
English 01
Deutsch 11
Español 18
Français 25
Italiano 32
02 English English 03
1. Entry Sensor is only compatible with the eufyCam Security System.
2.
Make sure the region printed on your product package (A or B),
matches the region printed on your HomeBase.
Region A or B
Region A or B
Battery Placement
Remove the battery compartment lid on the Entry Sensor and insert the
provided CR123A battery. Replace the lid.
04 English English 05
Adding Entry Sensor to Your System
O
n Eufy Security app follow the onscreen instructions to add your Eufy Security
devices. Choose Add Device, then select Entry Sensor to add it to your system.
Mounting the Sensor
Place the sensor on the edge of a door
or window. Use the adhesive strips (On
the back of the sensor) or mounting
screws provided to mount the sensor.
• Make sure the gap between Entry
Sensor and the sensor magnet is
less than 1.6 in (4 cm) when the
door or window is closed.
• The bottom of the sensor magnet
should align with the bottom of
Entry Sensor.
06 English English 07
LED
Sensor LED indicator color Entry Sensor status
Flashing white Adding to HomeBase
Flashing white (
Once)
Sensor detects an open/close activity
Flashing red (Once)
Sensor battery is low or disconnects from
HomeBase
FAQ
1. What battery does the Entry Sensor use?
Entry Sensor uses a CR123A battery with 3V output.
2. How long does the battery last?
One CR123A battery usually lasts up to 2 years, but depends on the usage.
Please visit our official website to download the user manual: www.eufylife.com
Safety
This product complies with the radio interference requirements of the
European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.For
the declaration of conformity, visit the Web site https://www.eufylife.com/.
Do not use the Device in the environment at too high or too low temperature, never
expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 0
°C
- 40
°C
.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body.
To maintain compliance with RF exposure requirement, use product that maintain a
20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
SUB-1G Frequency range:866~866.8MHz, 868.2~869MHz
Max Output Power: 11.746dBm
The following importer is the responsible party (contact for EU matters only)
Importer:Anker Technology (UK) Ltd
Importer Address:Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham,United Kingdom B11 2AA
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste,
and should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. (4) Consult the dealer or an experienced radio/TV technician
for help.
FCC Radio Frequency Exposure Statement
English 0908 English
Deutsch 11
10 English
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation distance
is 20cm.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone:1-206-383-8247
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement."
Für die Einbruchsensor-Installation:
Einbruchsensor
(T8900)
Sensormagnet CR123A-Batterie Befestigungs-
schrauben
12 Deutsch Deutsch 13
1. Der Einbruchsensor ist nur mit dem eufyCam Security System
kompatibel.
2. Achten Sie darauf, dass die auf der Produktverpackung angegebene
Region (A oder B) der Region entspricht, die auf Ihrer HomeBase
aufgedruckt ist
.
Region A or B
Region A or B
Batterie einlegen
Nehmen Sie den Deckel des Batteriefachs des Einbruchsensors ab und setzen
Sie die im Lieferumfang enthaltene CR123A-Batterie ein. Bringen Sie den Deckel
wieder an.
14 Deutsch Deutsch 15
Den Einbruchsensor Ihrem System hinzufügen
Befolgen Sie in der Eufy Security-App die Anweisungen auf dem Display, um Ihre
Eufy Security-Geräte hinzuzufügen. Wählen Sie Gerät hinzufügen aus und dann
Einbruchsensor, um diesen Ihrem System hinzuzufügen
.
Sensor anbringen
Bringen Sie den Sensor an der Kante
einer Tür oder eines Fensters an.
Verwenden Sie dazu die Klebestreifen
(auf der Rückseite des Sensors) oder
die im Lieferumfang enthaltenen
Befestigungsschrauben.
• Stellen Sie sicher, dass der Abstand
zwischen dem Einbruchsensor und
dem Sensormagneten weniger als
4 cm beträgt, wenn die Tür oder das
Fenster geschlossen ist.
• Die Unterseite des Sensormagneten
sollte an der Unterseite des
Einbruchsensors ausgerichtet sein.
16 Deutsch
LED
Farbe der Sensor-LED-Anzeige Status des Einbruchsensors
Blinkt weiß Wird der HomeBase hinzugefügt
Blinkt einmal weiß
Sensor erkennt eine Aktivität des Typs Öffnen /
Schließen
Blinkt einmal rot
Ladestand der Sensorbatterie ist niedrig, oder
der Sensor hat keine Verbindung zur HomeBase
Häufig gestellte Fragen
1. Welche Batterie wird für den Einbruchsensor verwendet?
Für den Einbruchsensor wird eine CR123A-Batterie mit einer
Ausgangsleistung von 3 V verwendet.
2. Wie lange hält die Batterie?
Eine CR123A-Batterie hält in der Regel bis zu 2 Jahre, je nach Nutzung.
Laden Sie das Benutzerhandbuch über unsere offizielle Website herunter:
www.eufylife.com
Sicherheit
Dieses Produkt entspricht den EU-Bestimmungen zur Störfestigkeit.
Dieses Produkt ist mit hochwertigen Materialien und Komponenten für
Recycling und Wiederverwertung konzipiert.
Dieses Symbol bedeutet, dass das Produkt nicht als Hausmüll entsorgt
werden darf, sondern einer angemessenen Sammelstelle für das Recycling
zugeführt werden muss. Durch das ordnungsgemäße Entsorgen und Recyceln
tragen Sie zum Schutz natürlicher Ressourcen und zur Vermeidung von
Umwelt- und Gesundheitsschäden bei. Weitere Informationen zum Entsorgen
und Recyceln dieses Produkts erhalten Sie von Ihrer Gemeindeverwaltung,
Ihrem zuständigen Entsorgungsdienst oder dem Geschäft, in dem Sie dieses
Produkt erworben haben.
Deutsch 17
Other manuals for T8900
2
Table of contents
Languages:
Other eufy Security Accessories manuals
eufy Security
eufy Security 906290 User manual
eufy Security
eufy Security T8900 User manual
eufy Security
eufy Security T8910 User manual
eufy Security
eufy Security T8200 User manual
eufy Security
eufy Security T8221 User manual
eufy Security
eufy Security T8220 User manual
eufy Security
eufy Security T8740 User manual
eufy Security
eufy Security T8222 User manual
eufy Security
eufy Security T8200S User manual
eufy Security
eufy Security HomeBase 2 User manual
