eufy Security 2K User manual
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other countries.
All other trademarks are the property of their respective owners.
51005002010 V01
QUICK
START GUIDE
Video Doorbell 2K (Wired)
TABLE OF
CONTENTS
What’s Included 02
How the System Works 03
Getting Started 04
Setting Up the System 06
Finding a Spot For Mounting 07
Installing the Mounting Bracket 11
12 Running Wires through the Wall
13 Connecting the Wires
14 Hooking / Detaching the Doorbell
16 Powering on theVideo Doorbell
17 Notice
105 Customer Service
English 01
Deutsch 21
Español 38
Français 55
Italiano 72
Nederlands 89
01 English English 02
WHAT’S INCLUDED
For Video Doorbell Installation
QSG
Video Doorbell
2K (Wired)
Model:T8200
Quick Start Guide
Doorbell
Detaching Pin
Screw Packs (Anchors
are optional)
Mounting Bracket
(Attached to 15°
Mounting Wedge)
Indoor Power Adapter
15° Mounting
Wedge (Optional)
Screw Hole
Positioning Card
Doorbell Chime
Model:T8740
FCC ID: 2AOKB-T8200
IC: 23451-T8200
Doorbell Chime
Power Pin
Note:
•Doorbell chime power pin varies in different regions.
•Power adapter plug varies in different regions.
HOW THE SYSTEM WORKS
How the System Works
The video doorbell system includes 2 parts. One is the video doorbell at your porch.The other is
the electronic chime plugged into an indoor power socket.The video doorbell is powered by the
provided indoor power adapter, which requires the user to drill a hole in the external wall to run
the power cord from indoors to outdoors.
The video doorbell doesn’t work with the existing doorbell chime. Use the provided electronic
chime instead. When someone rings the doorbell, people in the house will be notied.
Video Doorbell
Doorbell Chime
Tips:
•To make the doorbell system work, running wires through the wall is required. You may
need to hire a qualied electrician at your expense.
•The existing doorbell system is not compatible. If you have an existing doorbell button,
remove it to avoid confusing visitors.
03 English English 04
STEP 1 GETTING STARTED
Prepare the Video Doorbell for Installation
1. Slide in the plug to the switching adapter until you hear a click.
2. Connect the power adapter to the video doorbell.
3. Connect the provided power adapter to a power outlet preferably near the door.Wait for
the video doorbell to power on.
4. Align the doorbell chime power connector with the doorbell chime pin, and turn it clockwise
until it locks in place.
When install,
When install,
When install,
Doorbell Chime
Model:T8740
Doorbell Chime
Power Pin
05 English English 06
STEP 2 SETTING UP THE SYSTEM
Set up the System
1. Download the Eufy Security App from the App Store or Google Play Store and install the App
on your phone.
2. Log into the Eufy Security App.Add your video doorbell (Wired) and scan the QR code for
later installation process. QR code can be found on the back of the video doorbell and at the
rear of the documentation box.
Download EufySecurity App from App
Store or Google Play.
Register or log into your EufySecurity
account.
Add the doorbell and scan this code.
3. Follow the on-screen instructions to connect the video doorbell to your home Wi-Fi, and
complete the setup of the video doorbell.Then you can view live streams on the Eufy Security
app.When you press the doorbell button, the provided electrical chime will sound a ringtone.
Note: If you want to share your video doorbell to your family members and let them
operate the video doorbell via the Eufy Security App, go to Family & Guest from the App’s
side menu and follow the on-screen instructions to share your video doorbell.
STEP 3 FINDING A SPOT FOR MOUNTING
Select Location and Height
1. Take the video doorbell outdoors with the power cord connected to it. It is safe to carry it
around as the output is low voltage(19V DC).
2. Try to nd a location at your front door where you can get an ideal eld of view on live
stream.This is the location where you will mount the video doorbell.The recommended
height for mounting is 48” (1.2 m) from the ground.
If you want to place the doorbell close to a side wall, make sure the wall doesn't show up in
the eld of view. Installing the doorbell too close to a side wall will reect IR light and make
night vision blurry.
1.76m(5’9”)
1.2m (48")
0.3m
(12")
1m
(40")
3. Place the Screw Hole Positioning Card against the wall to mark the location for the power
cord to run through the wall. Position the hole for the power cord to line up with the bottom
half of the Positioning Card’s square hole. Make sure this is where the wire will come out of.
07 English English 08
What is required: Screw Hole Positioning Card
Power Drill with
1/4" (6.35mm) Drill Bit
(User provides it.)
Screw Hole
Positioning-Card
4. Unplug the power adapter and detach the power adapter from the video doorbell.
Drill Holes
1. Drill a hole for the power cord to run through. Use a drill bit that is long enough to fully drill
through the exterior wall.
2. Drill 2 holes to mount the mounting bracket.
•If you are installing the mounting bracket on a wooden wall or board, DO NOT drill
holes.You can screw in the wood directly.
•Anchors are needed if you are installing the mounting bracket on a wall that is made out
of hard materials such as stucco, brick, or concrete.
•Drill on the screw hole positioning card with a 15/64” (6 mm) drill bit.
What is required: Power Drill with 15/64” (6 mm) Drill Bit / Extra Long
Drill Bit
Power Drill with
1/4" (6.35mm) Drill Bit
(User provides it.)
Extra Long Drill Bit 15/64”(6 mm) Drill Bit
Note:
• If you have problems with drilling holes yourself, have a qualied electrician do it. Make sure
that you keep away from wires or pipes within the wall while drilling holes.
•If you have an existing doorbell button at the front door, remove it along with the wires to
avoid confusing visitors by having 2 doorbells.
09 English English 10
Use the 15° Mounting Wedge (Optional)
Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see more on a
specic side.
15°
Without 15° Mounting wedge
Door Door
Video Doorbell Video Doorbell
With 15° Mounting wedge
STEP 4 INSTALLING THE MOUNTING BRACKET
1. Insert the two screws provided through the screw holes or through the 15° mounting wedge
(Install the mounting bracket to the 15° mounting wedge in prior, using long screws).
2. Fasten the screws into the wall tightly.
What is required: Mounting Bracket / Screw Packs / 15° Mounting
Wedge (Optional) / Philips-Head Screwdriver
Mounting Bracket
(Attached to 15° Mounting Wedge)
Screw Packs (Anchors
are optional)
15° Mounting
Wedge (Optional)
Phillips-Head Screwdriver
(User provides it.)
Without 15° Mounting Wedge
Wall Wall
Mounting
Bracket
Mounting
Wedge
Mounting
Bracket
With 15° Mounting Wedge
11 English English 12
STEP 5 RUNNING WIRES THROUGH THE
WALL
Run Wires through the Wall
1. Unplug the power adapter before running wires.
2. Unscrew the terminals on the back of the doorbell to detach the power cord.
3. Slip down the grommet over the adapter wires.
4. Run the power cord through the hole and carefully extend them outside.
• Make sure you have a qualied electrician run the wires if you are not comfortable
with dealing with wires.
• Use the rubber plug or glue to ll the drill holes.
•Use the provided grommet to hold the wires into place. Make sure the wires are
tucked neatly.
13 English English 14
STEP 6 CONNECTING THE WIRES
Connect the Wires
Connect the wires to the two terminals at the back of the doorbell, then tighten the terminal
screws. Wire can connect to any terminal.
•To prevent short-circuit, make sure the wires are not touching each other or
crossing after connecting them to the terminals.
What is required: Power Adapter / Video doorbell / Philips-Head Screwdriver
Power Adapter Video Doorbell 2K (Wired)
Model:T8200
Phillips-Head Screwdriver
(User provides it.)
STEP 7 HOOKING / DETACHING THE
DOORBELL
Hook the Doorbell on the Mounting Bracket
There are 2 thermal conductive pads on the mounting bracket.They're used to conduct heat from
the video doorbell to the metal bracket.
1. Remove the lms on the thermal conductive pads before you mount the doorbell.
2. Hook the doorbell on top of the mounting bracket.
3. Snap the doorbell bottom to the bracket and press it down until it clicks into place.
1 2 3
If the doorbell doesn’t t well, or you want to replace the doorbell, you can detach
the doorbell.
15 English English 16
Detach the Doorbell
1. Use the doorbell detaching pin provided if you wish to detach the doorbell from the mounting
bracket.
2. Press and hold the hole on the bottom of the doorbell and then lift its bottom to take it off.
What is required: Doorbell detaching pin
Doorbell
Detaching Pin
STEP 8 POWERING ON THE VIDEO DOORBELL
1. Plug the power adapter into the wall outlet indoors.
2. Wait for the video doorbell to power up.The doorbell ring turns cyan.You can view the live
stream shot from the video doorbell on the Eufy Security App.
For troubleshooting, check Help on the Eufy Security App.
Table of contents
Languages:
Other eufy Security Accessories manuals
eufy Security
eufy Security 906290 User manual
eufy Security
eufy Security HomeBase 2 User manual
eufy Security
eufy Security T8200 User manual
eufy Security
eufy Security T8740 User manual
eufy Security
eufy Security T8220 User manual
eufy Security
eufy Security T8203 User manual
eufy Security
eufy Security T8200S User manual
eufy Security
eufy Security T8210 User manual
eufy Security
eufy Security T8910 User manual
eufy Security
eufy Security T8222 User manual
