eTIGER Secual Box V2 User manual
www.etiger.com
Quick Start Guide
Secual Box V2
Wi-Fi / GSM Alarm System
ESB-WS2A
Images, illustrations and text are non-contractual. eTIGER and the eTIGER logo are
registered trademarks and the property of eTIGER. Copyright © 2019 eTIGER. All
rights reserved.
EN
Only if you are using a SIM card
1
SIM
SIM
Control panel’s
SIM card
Insert the SIM card in the control panel
Optionally you can use a SIM adaptor when only using a nanoSIM or microSIM
You will need a SIM card if you wish to interact with your Secual Box by SMS and
phone calls.
IMPORTANT
-Make sure the SIM card is not protected by a PIN code.
-We advise you to choose a plan with unlimited text and 1 or 2 hours of call. The
SIM card must be compatible with the GSM network. Contact your carrier for
more information.
EN
Turn the control panel on
-Plug the power adapter to an AC socket.
-Plug the output connector of the power adapter into the adapter input on
the side of your control panel.
-Push the power switch.
-Place your system where you have a good reception (Wi-Fi and/or GSM)
LED INDICATIONS
- TOP : Blinking slowly = connected to GSM signal | Blinking
rapidly = Searching for GSM signal
- BOTTOM : Green xed = powered and on | Blue = WI-Fi
connected
SIM
Power switch
Power adapter input
2
Get your app ready
-Download the ”Secual Box V2”app on your smartphone (on the App Store and
Google Play).
-Open the app on your smartphone.
-Create an account. Fill in all the required elds and press “√ ”
3
“SIM card only” users
If you are using the Secual Box with a SIM card and cannot use the
iOS and Android apps, read the full manual to learn more about
interaction by SMS and phone call.
Full manual is available on etiger.com
Secual
Box V2
EN
4
Connect your system
-In the “Secual Box V2”app, login to your account.
-Close your app and go to your Wi-Fi settings. Find the ES-WIFI network and
connect.
-Press“add device”.A device ID will be lled in, if not push“Get device ID”.
-Wait for 20 seconds to have the app retreive the ID from your device.
-Search and select your home Wi-Fi network and ll in the SSID password.
-Press the “connection” button.
-Fill in an alarm name and SIM card number (only when a SIM card is inserted)
-You can now access your alarm system.
WLAN
WLAN
ESWIFI
NO DEVICE ID
-See next page when you are having trouble retreiving the device iD
!
SIM
No device ID
When you cannot retrieve the device ID from the app,
or the ESWIFI network seems to be secured, reset the
device connection
-Press the connection button for about 3 seconds
until the device beeps 3 times.
-In your Smartphone Wi-Fi connections search for
the ESWIFI network and look if the network is not
secured (open network)
-Go back to step 4.
RESET THE DEVICE
If above opration fails, or the system ESWIFI network keeps being
secured, you need to reset the alarm device.
-Press the connection button and keep it pressed
-Press the SOS button on top of the device.
-The alarm device will beep 2 times and afterwards 3 times. this
means the device is fully reset.
A full rest means the system will remove all phone numbers and
added accessories.
SIM
DEVICE IS OFFLINE OR DOES NOT SHOW IN LIST
-Try opening port TCP 8400 in your router settings. More info : www.etiger.com.
EN
5
Store telephone numbers and SMS numbers
This step enables you to dene the phone number(s) to which an SMS is sent,
or to which number the system will call when an alarm is triggered. Only stored
numbers can control and congure the system.
SMS numbers:
1.
2.
3.
4.
SMS numbers:
1.0600112233
2.
3.
4.
6
Ok
BY APP
-In the app, press“phone numbers”
on the bottom.
-Dene and ll in all numbers for
SMS notication and telephone call
upon alarm.
-Select or to determine the
SMS or telephone notication
[white : selected notication].
-Press “√ ”to conrm.
BY SMS
-Send “6” or“5”by SMS to the phone
number of the SIM card in the control
panel.
-The control panel replies with a SMS
containing your SMS and telephone
list
-Copy and paste this SMS and edit it so
to add your phone number(s)
-Then send the SMS back to the
control panel.
6
Control the system
Arm the system [all sensors are active]
-Press in your app | send“1”to the number of the SIM card in your alarm |
Press the button on your remote control
Disarm the system [All sensors are inactive]
-Press in your app | send “1”to the number of the SIM card in your alarm |
Press the button on your remote control
Partially arm the system [some sensors are Inactive]
-Press in your app | send “1” to the number of the SIM card in your alarm |
Press the button on your remote control
“SIM CARD”USERS
-If you are using a SIM card the system may ask you how to send the message to
your alarm system : Wi-Fi or SMS.
Other manuals for Secual Box V2
1
Table of contents
Languages:
Other eTIGER Security System manuals
eTIGER
eTIGER ES-D3B User manual
eTIGER
eTIGER S3b Sim Secual User manual
eTIGER
eTIGER S3b Sim Secual User manual
eTIGER
eTIGER ES-S7AU User manual
eTIGER
eTIGER ES-D3A User manual
eTIGER
eTIGER secual box User manual
eTIGER
eTIGER S3b Sim Secual Operator's manual
eTIGER
eTIGER Secual Box V2 User manual
eTIGER
eTIGER S4 Cell + Line User manual
eTIGER
eTIGER S5 User manual
eTIGER
eTIGER S2 User manual
eTIGER
eTIGER S4 Combo Secual User manual
eTIGER
eTIGER secual box User manual
eTIGER
eTIGER ES-D4A User manual
eTIGER
eTIGER S3 Sim Secual User manual
eTIGER
eTIGER S3b Sim Secual Operator's manual
eTIGER
eTIGER ES-S7A User manual
eTIGER
eTIGER ESB-WS2A User manual
eTIGER
eTIGER S5 User manual
eTIGER
eTIGER S3b User manual
Popular Security System manuals by other brands
EDM
EDM Solution 6+6 Wireless-AE installation manual
Highway Safety Group
Highway Safety Group EA401 user manual
Siren
Siren LED GSM operating manual
Detection Systems
Detection Systems 7090i Installation and programming manual
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 instructions
Siemens
Siemens FDM273 manual