ETC Desire D22 User manual

ETC Quick Guide

Desire®Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 1 of 12 Electronic Theatre Controls, Inc.

Corporate Headquarters



Middleton, WI, USA



Tel +608 831 4116



Service: (Americas) [email protected]

London, UK



Tel +44 (0)20 8896 1000



Service: (UK)

[email protected]

Rome, IT



Tel +39 (06) 32 111 683



Service: (UK) [email protected]

Holzkirchen, DE



Tel +49 (80 24) 47 00-0



Service: (DE) [email protected]

Hong Kong



Tel +852 2799 1220



Service: (Asia) [email protected]

Web: www.etcconnect.com



Product information and specifications subject to change.

7410M1300-1.8.0



Rev A



Released 2015-10



ETC intends this document to be provided in its entirety.

Overview

For complete information and step-by-step instructions, see Desire Series by ETC D22, D40, D40XT, D60,

D60X User Manual. ETC documentation can be downloaded at www.etcconnect.com/downloads.aspx.

The features shown in the following graphics may not appear on all Desire Series

fixtures.

LED array

Accessory

holder

Yoke

Accessory

retainer

Yoke

locking

Safety

cable loop

PUSH

Power In

Power Thru

Keypad

LCD

DMX In

DMX Thru

Status

indicators

***There is no user interface on the D60X

Light Bulb

Home

Back

Enter

Down

Power – Indicates AC power is On.

DMX – Indicates control signal is Active.

Error – Indicates data error, high temperature, or other

unusual status.

ETC Quick Guide

Desire Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 2 of 12 Electronic Theatre Controls, Inc.

Install

D22 Portable, D40, D40XT, D60, D60X

Step 1: Hang or mount the fixture.

Step 2: Attach safety cable.

Step 3: Insert secondary lens with smooth side out, if desired.

Step 4: Insert additional accessories if desired. (top hat, egg crate, etc.)

D22 Canopy and D22 Track

See the Desire Series D22 Installation Guide for details on installing the Canopy and Track mounted options

of the D22 fixture.

Connect

D22 Portable, D40, D40XT, D60 and D60X

Step 1: If using external DMX or RDM control, attach a 5-pin XLR cable to DMX In.

Step 2: Connect power cable to AC power.

Step 3: Plug the XLR cable into data source, if applicable.

Step 4: Link any additional fixtures via Power Thru and DMX Thru connectors.

• The D22 fixture does not have the Power Thru option.

WARNING:

Use only hardware rated for total weight of fixture and accessories.

The safety cable (or other approved safety device) must be securely

attached to the safety cable loop before loosening the clamp.

WARNING:

• Do not link more than nine fixtures when using Power Thru (non-dimming,

100 to 240 VAC, 50/60 Hz). Power Thru is not available on all Desire Series

fixtures.

• Up to 32 devices can be daisy-chained together per data run.

• Disconnect Power and DMX before all cleaning and maintenance.

With yoke Accessory holder and clip

With floor stand Canopy mount

(D22 only)

Track mount

(D22 only)

PUSH

Power In DMX In

DMX Thru

Power Thru

(Power Thru

not available

on D22) ***There’s no UI on D60X

ETC Quick Guide

Desire Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 3 of 12 Electronic Theatre Controls, Inc.

Focus

D60X fixtures do not have the user interface

that other Desire fixtures do. For information

on setting up D60X fixtures, skip to:

Configure D60X using RDM on page 4.

Step 1: Supply power and wait for the

fixture to boot up.

Step 2: Press []to open Presets &

Sequences.

Step 3: Select Focus and press []

to turn on LED array.

Step 4: Adjust fixture's position.

Step 5: Once focus is set, press []to turn off LED array and then []to return to home screen.

Address

Step 1: From the home screen, press []to open Main Menu.

Step 2: On the Main Menu, scroll to DMX Start Address, press [].

Step 3: Use []or []to scroll to desired address.

Step 4: Press []to select address number.

Step 5: Press []to return to home screen.

* DMX address is not needed if using standalone or master/slave control.

Features Quick Setup

Step 1: On the Main Menu, scroll to Quick Setups.

Step 2: Press [].

Step 3: Scroll to the desired setup and then press [].

An asterisk (*) indicates which setup is active.

• Press []to return to the home screen.

The top line of the home screen displays the name of the active setup.

Individual features and settings are adjustable under the Advanced menu. Consult the User Manual for

more information on advanced features of Desire fixtures.

Note:

For setup of D22 track and canopy mounted fixtures, see the D22 Installation Guide. ETC

documentation can be downloaded at www.etcconnect.com.

ETC Quick Guide

Desire Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 4 of 12 Electronic Theatre Controls, Inc.

Quick Color (Vivid, Lustr+, Fire and Ice, Studio HD)

Quick Color allows you to easily select a color and its intensity from a predefined menu. This

feature overrides any presets or sequences previously selected and is only available when there is

no external DMX signal to the fixture.

To select a Quick Color:

Step 1: Press the []to access the Presets and Sequences screen.

Step 2: Within the Presets and Sequences screen, scroll to Quick Color and press [].

Step 3: Scroll to Color and press [].

Step 4: Scroll to the desired color and press [].

Step 5: Scroll to adjust the fixture’s intensity and press []to commit the selection.

Step 6: To exit the Quick Color menu, press [].

Configure D60X using RDM

Up to 32 D60X fixtures can be daisy-chained on a DMX/RDM network. Each

fixture can have an unique DMX address and each address can be

configured separately. Also, more that one fixture can have the same

address, allowing you to configure them identically.

Use an RDM configuration tool or an RDM lighting control device to

configure the fixtures. An RDM configuration tool is installed on a PC,

which is connected to the DMX/RDM network via Gadget or a DMX/RDM

gateway. After the fixtures are configured, Gadget or the gateway can be

disconnected and a DMX or RDM control device can be connected to the

network for continued operation. For more information on configuring

fixtures using RDM, reference the Desire Series User Manual. All manuals are available for free download

from www.etcconnect.com.

Note:

Exiting the Quick Color menu will return the fixture to the state it was in prior to entering

the menu.

D60X fixture

ETC Quick Guide

Desire Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 5 of 12 Electronic Theatre Controls, Inc.

Quick Setups

D40XT, D40, D60, and D60X – Vivid, Lustr+, Fire, Ice, Studio HD

D22 – Lustr+, Studio HD

D22, D40, D40XT, D60, and D60X – Studio Tungsten and

Studio Daylight

Quick

Setup Profile Features Recommended For:

Studio Studio Linear dimming curve, regulated

output mode for color consistency

Studio factory default: enables three-

parameter control of white light

(intensity, white point, and tint) via DMX

from a console or console-free fixture

display

General Direct

Standard dimming curve, regulated

output for color consistency.

3200K white point setting

Factory default: for general purpose use,

including interior architectural

applications

Stage HSI

Plus 7 enabled

Incandescent dimming curve,

regulated output for color

consistency, 3200K white point

setting

Theatrical lighting: duplicates the color

and dimming behavior of tungsten and

stage lighting fixtures

High

Impact RGB

Quick dimming curve, boost mode

for maximum intensity, 5600K

white point setting

Event lighting: enables quick response,

simple RGB control and strobe channel

for maximum effect usage

Quick

Setup Profile Features Recommended For:

Studio Studio Linear dimming curve, regulated

output for intensity stability

Enables control of intensity from

luminaire’s user interface; no console

required

Single

Channel Direct Standard dimming curve, regulated

output for color consistency For general purpose architectural use

Stage Direct Incandescent dimming curve,

regulated output

Matches conventional luminaire

performance

ETC Quick Guide

Desire Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 6 of 12 Electronic Theatre Controls, Inc.

DMX Input Channel Profiles

D40, D40XT:Vivid, Lustr+, Fire, Ice, Studio HD; D22 – Lustr+, Studio HD

DMX

Profile

DMX

Channels

Channel Assignments Notes

Vivid, Lustr+ Studio HD

Direct 9

1 - Red 1 - Red

Direct control of each individual color with a

separate master intensity channel. Color

calibration of LEDs is not active in this mode.

The nine-channel profile will produce the

highest quality color cross fades.

2 - Orange

(White if Lustr+) 2 - Orange

3 - Amber 3 - Amber

4 - Green 4 - Green

5 - Cyan 5 - 3200K White

6 - Blue 6 -5000K White

7 - Indigo 7 - Indigo

8 - Intensity 8 - Intensity

9- Strobe 9- Strobe

RGB

(Ch. 4 not

used)

1-Red

Effectively addresses all seven colors via three

channels of control. RGB profile will produce

medium quality color cross-fades

2-Green

3-Blue

4 - n/a

5 - Strobe

HSI 5

1 – Hue (coarse)

High resolution hue (two channels), saturation,

and intensity control.

HSI mode will produce color cross-fades around

the color space.

2 – Hue (fine)

3 - Saturation

4 - Intensity

5- Strobe

HSIC 6

1 – Hue (coarse)

High-resolution hue, saturation, and intensity

control as above, with the addition of a color

point channel to adjust the color temperature of

the fixture in both white light and color. Color

cross-fade performance is the same as HSI.

2 – Hue (fine)

3 - Saturation

4 - Intensity

5 - Strobe

6 - Color Point (CCT)

Studio 3

1 – Intensity Controls fixture as a white light unit. If no DMX

is present, (i.e. console input), a fixture can be

adjusted for these three parameters on the U/I

at the back of the unit.

2 – Color Point (CCT)

3 - Tint

ETC Quick Guide

Desire Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 7 of 12 Electronic Theatre Controls, Inc.

Additional profile options

Plus 7

1 – Hue (coarse)

2 - Hue (fine)

3 – Saturation

4 – Intensity

5 – Strobe

6 – n/a

7– Plus 7 Control on/off

8– Red

9– Orange

(white if Lustr+)

10 – Amber

11 - Green

12 - Cyan

13 - Blue

14- Indigo

Adds seven additional color control channels to

RGB, HSI, HSIC, and Studio input profile

settings. For example HSI with ‘Plus 7’ enabled

becomes an 14-channel profile

The desired color and intensity are achieved by

using the HSI or RGB channels

Placing channel seven at a value over 51% gives

the fixture a 14 channel profile.

Channels 8-14 represent the native colors of the

fixture and allow the operator to adjust

individual color channels to fine tune the color

output.

Strobe Variable strobe control: 0% is no strobe. The fixture output will strobe more rapidly as the

strobe-channel value approaches 100%.

ETC Quick Guide

Desire Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 8 of 12 Electronic Theatre Controls, Inc.

D60 & D60X: Vivid, Lustr+, Fire, Ice, Studio HD (no Fire or Ice in D60X)

DMX

Profile

DMX

Channels Channel Assignments Notes

Direct 10

1 - Red

Direct control of each individual color with a

separate master intensity channel. Color calibration

of LEDs is not active in this mode. The ten-channel

profile will produce the highest quality color cross

fades.

2 - Orange

(White if Lustr+)

3 - Amber

4 - Green

5 - Cyan

(3000K white if Studio HD)

6 - Blue

(5000K White if Studio HD)

7 - Indigo

8 - Intensity

9- Strobe

10- Fan Control

RGB

(Ch. 4 not

used)

1-Red

Effectively addresses all seven colors via three

channels of control. RGB profile will produce

medium quality color cross-fades

2-Green

3-Blue

4 - n/a

5 - Strobe

6 - Fan Control

HSI 6

1 – Hue (coarse)

High resolution hue (two channels), saturation, and

intensity control.

HSI mode will produce color cross-fades around the

color space.

2 – Hue (fine)

3 - Saturation

4 - Intensity

5 - Strobe

6 - Fan Control

HSIC 7

1 – Hue (coarse)

High-resolution hue, saturation, and intensity

control as above, with the addition of a color point

channel to adjust the color temperature of the

fixture in both white light and color. Color cross-

fade performance is the same as HSI.

2 – Hue (fine)

3 - Saturation

4 - Intensity

5 - Color Point (CCT)

6 - Fan Control

7 - Color Point (CCT)

Studio

(Ch. 4 not

used)

1 – Intensity

Controls fixture as a white light unit. If no DMX, i.e.

console input, is present, fixture can be adjusted for

these three parameters on the U/I at the back of the

unit.

2 – Color Point (CCT)

3 - Tint

4 - n/a

5 - Strobe

6 - Fan Control

Additional profile options on following page

ETC Quick Guide

Desire Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 9 of 12 Electronic Theatre Controls, Inc.

D40XT, D40, D60, D60X– Studio Tungsten, and Studio Daylight

D22 - Studio Tungsten and Studio Daylight

Plus 7

Adds seven additional color control channels to RGB, HSI, and HSIC input profile

settings. For example HSI with ‘Plus 7’ enabled becomes an 15-channel profile:

1 – Hue (coarse)

2 - Hue (fine)

3 – Saturation

4 – Intensity

5 – Strobe

6 – Fan Control

7 – n/a

8 – Plus 7 Control on/off

9 – Red

10 – Orange (white if

Lustr+)

11 – Amber

12 - Green

13 - Cyan

14 - Blue

15 -Indigo

The desired color and intensity are achieved by using

the HSI or RGB channels

Placing channel eight at a value over 51% gives the

fixture a 15 channel profile.

Channels 9-15 represent the native colors of the

fixture and allow the operator to adjust individual

color channels to fine tune the color output.

Strobe Variable strobe control: 0% is no strobe. The fixture output will strobe more rapidly

as the strobe-channel value approaches 100%.

DMX

Profile

DMX

Channels

Channel

Assignments Notes

Studio 3

1 - Intensity Direct control of each individual color with a separate master

intensity channel. Color calibration of LEDs is not active in this

mode. The ten-channel profile will produce the highest

quality color cross fades.

2 - Strobe

3 - Fan Control

(D60 only)

Direct 3

1-Intensity

2-Strobe

3-Fan Control

(D60 only)

ETC Quick Guide

Desire Fixture Series

D22, D40, D40XT, D60, D60X Fixtures Page 10 of 12 Electronic Theatre Controls, Inc.

Typical Power Consumption (D22)

Lustr+

Studio Tungsten

Studio Daylight

Studio HD

Typical Power Consumption (D40 and D40XT)

Vivid

Lustr+

Fire

Ice

Studio HD

100V 120V 230V

Idle Power / Current 7.8W / 0.111 7.6W / 0.111A 7.4W / 0.094A

100% Boost Power / Current 56.8W / 0.578 56.5W / 0.475A 55.1W / 0.288

100V 120V 230V

Idle Power / Current 7.6W / 0.11A 7.6W / 0.11A 7.2W / 0.094A

100% Boost Power / Current 52.4W / 0.532A 51.8W / 0.445A 50.9W / 0.276

100V 120V 230V

Idle Power / Current 7.3W / 0.093A 7.2W / 0.091A 7.3W / 0.124A

100% Boost Power / Current 55.2W / 0.556A 55W / 0.462A 53.8W / 0.268

100V 120V 230V

Idle Power / Current 6.7W / 0.095A 6.7W / 0.098A 6.7W / 0.118A

100% Boost Power / Current 55W / 0.555A 54.6W / 0.464A 53.3W / 0.271A

100V 120V 240V

Idle Power / Current 10.5W / 0.135A 11W / 0.098A 12.7W / 0.078A

100% Boost Power / Current 102W / 1.12A 98W / 0.82A 95.6W / 0.403

100V 120V 240V

Idle Power / Current 10.3W / 0.125A 10.5W / 0.094A 12.2W / 0.074A

100% Boost Power / Current 104W / 1.16A 102W / 0.861 99.7 W / 0.418

100V 120V 240V

Idle Power / Current 10.5W / 0.125A 10.8W / 0.096A 12.5W / 0.076A

100% Boost Power / Current 91.2W / 1.02A 88.2W / 0.74A 87.2W / 0.369A

100V 120V 240V

Idle Power / Current 11.0W / 0.123A 11.2W / 0.099A 12.8W / 0.077A

100% Boost Power / Current 104.2W / 1.17A 102.2W / 0.867A 99.5W / 0.42A

100V 120V 240V

Idle Power / Current 11.1W / 0.134A 11W / 0.097A 12.8W / 0.077A

100% Boost Power / Current 106.2W / 1.19A 103.5W / 0.883A 101.3W / 0.426A

Other manuals for Desire D22

This manual suits for next models

Table of contents

Other ETC Dj Equipment manuals

ETC

ETC ColorSource PAR User manual

ETC

ETC ColorSource Linear Pearl User manual

ETC

ETC S4WRDCII User manual

ETC

ETC RoadHog 4 User manual

ETC

ETC IRIDEON AR500 User manual

ETC

ETC ColorSource Spot jr v2.0 User manual

ETC

ETC ColorSource User manual

ETC

ETC F-Drive R12 Series User manual

ETC

ETC ColorSource Spot V 1.0 User manual

ETC

ETC Source 4WRD User manual

ETC

ETC Source Four LED Series User manual

ETC

ETC ColorSource PAR v1.7 User manual

ETC

ETC Source 4WRD User manual

ETC

ETC Source Four Mini LED User manual

ETC

ETC ColorSource Spot Pearl v1.7 User manual

ETC

ETC Source Four User manual

ETC

ETC Source Four jr User manual

ETC

ETC Releve Spot Mounting instructions

ETC

ETC SolaPix 19 XT User manual

ETC

ETC Source 4WRD User manual

ETC

ETC Desire series Configuration guide

ETC

ETC Source Four PAR EA User manual

ETC

ETC Desire XTI Series User manual

ETC

ETC ColorSource Fresnel V User manual

Popular Dj Equipment manuals by other brands

ALPHA LITE

ALPHA LITE ALPHA 1500 User manual book

Chauvet

Chauvet OVATION E-930VW Quick reference guide

Zumtobel

Zumtobel APHRODITE Home Instructions for use

Snow Masters

Snow Masters Zig Oscillator user manual

EuroLite

EuroLite 50530554 user manual

Beamz

Beamz BUV243 user manual

thomann

thomann Stairville DJ Lase 40-G MK-III user manual

Eagletone

Eagletone 6 Eyes Flower user manual

EuroLite

EuroLite FLD-1508 user manual

Technical Pro

Technical Pro LG8xSEA user manual

JB Systems

JB Systems Lounge Laser DMX Operation manual

Lightmaxx

Lightmaxx Vega Halo 90 user manual

Elation

Elation FUZE WASH Z350 user manual

Maverick

Maverick MK3 WASH Quick reference guide

Infinity

Infinity TF-260C7 Fresnel manual

Chauvet

Chauvet EVE E-50Z Quick reference guide

Eliminator Lighting

Eliminator Lighting E 138 manual

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC user manual