ETC Releve Spot Mounting instructions

Relevé Spot

User Operations Manual

Version 1.1

Part Number: 2510M1200-1.1.0 Rev: B

Released: 2019-08

To view a list of ETCtrademarks and patents, go to etcconnect.com/ip. All other trademarks, both marked

and not marked, are the property of their respective owners.

ETC intends this document, whether printed or electronic, to be provided in its entirety. This product is

intended for professional use only. Read this entire document before using the product.

Table of Contents

Table of Contents i

Introduction 1

About This Manual 1

Other References 1

Document Conventions 1

Help fromTechnical Services 2

Warranty Service 3

Compliance 3

Declaration of Conformity 4

Safety Notices 5

Storage and Transporting 5

Unpacking Instructions 5

Overview 6

LED Source 6

Color System 6

Optical 6

Iris 7

Rotating Gobos 7

Ani-gobo Wheel 7

Frost 8

Pan and Tilt Movement 9

Pan and Tilt Locks 9

Control 10

DMX512-A 10

User Interface 10

Display 10

Button Controls 11

Auxiliary Battery 11

Power Requirements 11

Input Power Voltage Range 11

Power Receptacle/Connector Specification 12

Environment 12

Acoustic Performance 13

Weights and Dimensions 14

Weight 14

Dimensions 14

Mounting 15

Safety 16

Luminaire Overview 17

Top Level 17

Sub Assemblies 18

Installation 21

Attach Clamp Mounting Rails 21

Spacing Requirements 22

Floor Mounting 22

Rigging 23

Connect Data and Power 23

Connect DMX-512 23

Terminate DMX-512 24

Connect Power In and Thru 24

Power Up 25

Homing 25

User Interface 26

Auxiliary Battery 26

Display 26

ii Relevé Spot User Operations Manual

Button Controls 26

Menu Navigation 27

Status Screen 28

Menu System 29

Control Settings 30

Defaults 30

Options Menu 31

Pan/Tilt 31

LED Output Freq 31

Display 32

Reset Defaults 32

Home/Test 33

Re-home Fixture 33

Fixture Test 33

Lens Cleaning Access 34

Diagnostics 34

DMX Monitor 34

Board Firmware 34

Update Firmware 35

Update Firmware with USB Drive 35

Update Firmware with Push Firmware Feature 36

Advanced 36

Operation 37

DMX Channel Mode 37

DMX Start Address 38

Replace a Gobo 39

Remove the Effects Module 39

Remove a Gobo 41

Install a Gobo 42

Install the Effects Module 43

Table of Contents iii

Maintenance 45

Clean the Fan Filter 46

Remove and Reinstall Covers 47

Remove the Head Covers 47

Reinstall the Head Covers 48

Clean the Lenses 48

Replace the Effects Module 49

Replace the Optics Module 51

Remove the Optics Module 51

Install the Optics Module 53

Remove Clamp Mounting Rails 54

DMX Channel Map 55

Standard 56

Direct 63

Strobe 69

Technical Specifications 76

Source 76

Color 76

Optical 76

Control 76

Electrical 76

Thermal 76

Physical 76

Safety and Compliance 76

Note about LED luminaires 77

iv Relevé Spot User Operations Manual

Introduction 1

Introduction

Congratulations on your purchase of the Relevé Spot automated luminaire fromETC.

Relevé Spot is an LED-based automated spot luminaire that

provides high-quality color control, predictable smooth pan and tilt

control, and unparalleled zoom optics.

Relevé Spot builds on the legendary color control of ETC LED

products and provides a reliable, full-featured automated

luminaire of the highest quality.

About This Manual

This manual provides information required for safe installation,

operation, and scheduled maintenance of the Relevé Spot

automated luminaire. For your safety, read this entire manual prior

to installing, operating, or servicing the Relevé Spot luminaire.

Other References

Relevé Spot videos are available for viewing from the ETC website etcconnect.com/ReleveSpot.

Document Conventions

This document uses the following conventions to draw your attention to important information.

Note:

Notes are helpful hints and information that is supplemental to the main text.

CAUTION:

A Caution statement indicates situations where there may be

undefined or unwanted consequences of an action, potential for data loss or

an equipment problem.

WARNING: A Warning statement indicates situations where damage may

occur, people may be harmed, or there are serious or dangerous

consequences of an action.

WARNING: RISK OF ELECTRIC SHOCK! This warning statement indicates

situations where there is a risk of electric shock.

All ETC documents are available for free download from our website etcconnect.com.

Please email comments about this manual to TechComm@etcconnect.com.

2 Relevé Spot User Operations Manual

Help fromTechnical Services

If you are having difficulties, your most convenient resources are the references given in this

user manual. To search more widely, try the ETC website at etcconnect.com or the ETC support

website at support.etcconnect.com.

If none of these resources is sufficient, contact ETC Technical Services directly at one of the

offices identified below. Emergency service is available from all ETC offices outside of normal

business hours.

When calling for help, take these steps first:

•

Prepare a detailed description of the problem

•

Go near the equipment for troubleshooting

•

Find your notification number if you have called in previously

•

Locate the product model and serial number

•

Know your power source

•

Know your control source

Americas United Kingdom

ETC, Inc. ETC Ltd

Technical Services Department Technical Services Department

3031 Pleasant View Road 26-28 Victoria Industrial Estate

Middleton, WI 53562 Victoria Road,

800-775-4382 (USA, toll-free) London W3 6UU England

+1-608 831-4116 +44 (0)20 8896 1000

service@etcconnect.com techservltd@etcconnect.com

Asia Germany

ETC Asia ETC GmbH

Technical Services Department Technical Services Department

Room 1801, 18/F Ohmstrasse 3

Tower 1, Phase 1 Enterprise Square 83607 Holzkirchen, Germany

9 Sheung Yuet Road +49 (80 24) 47 00-0

Kowloon Bay, Kowloon, Hong Kong techserv-hoki@etcconnect.com

+852 2799 1220

service@etcasia.com

France

ETC France

62-64 rue Danielle

Casanova

Saint-Denis Cedex,

F93200

+33 1 4243 3535

techservltd@etcconnect.com

Introduction 3

Warranty Service

ETC warranty terms and conditions are available on the ETC website etcconnect.com.

Compliance

Relevé Spot has been tested to, is listed under, or complies with the following regulatory

compliance and standards:

cETLus

•

Tested to UL 1573 and CSA C22.2 No. 166 - Stage and Studio Luminaires with additional

compliance to UL 8750, LED luminaire

IEC 62471

•

LED Risk Group 1 - the luminaire LEDs do not pose a hazard due to normal behavioral

limitations on exposure

FCC - Part 15 Class A

•

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received; including interference that may cause undesired

operation.

Note:

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference, in which

case the user will be required to correct the interference at his own expense.

•

EN 55015:2013 + A1:2015

•

EN 61547:2009

•

EN 61000-3-2:2014

•

EN 61000-3-3:2008

•

EN 60598-2-17:1989

•

EN 60598-1:2015

•

EN 62471:2008

C-TICK

•

N4241

4 Relevé Spot User Operations Manual

Declaration of Conformity

EC DECLARATION OF CONFORMITY

Informational notes: The product(s) named herein have been found to comply with the testing and marking requirements of Australia and New Zealand and are suitable

for importation into those countries.

To ensure Compliance of this product with the stated Directives it must be installed and operated for its intended use according to the manufacturer’s instructions

London, United Kingdom Mr Adam Bennette

(Place of issue) (Name of authorised person)

8th Nov 2018

(Date of Issue) (Signature of authorised person)

Printed 8 November 2018

Page 1 of 1

Declaration:

Previous issue: 8th Nov 2018

Filename: master declaration 2018_2.docx

233 A

We, Electronic Theatre Controls Limited

declare under sole responsibility that the product(s):

Product name:

Relevé Automated luminaire

Product type/model:

Relevé RELSPOT

to which this declara!on relates is/are in conformity with the following Direc!ves by the applica!on of

the quoted Standards.

Low Voltage Direc!ve (LVD) 2014/35/EU:

EN 60598-1:2015 Luminaires. General requirements and tests

EN 60598-2-17:1989 Luminaires. Par!cular requirements. Speciﬁca!on for luminaires for stage

ligh!ng, television, ﬁlm and photographic studios (outside and indoor)

EN 62471:2008 Photobiological safety of lamps and lamp systems

Electromagne!c Compa!bility Direc!ve (EMCD) 2014/30/EU:

EN 55015:2013+A1:2015 Limits and methods of measurement of radio disturbance characteris!cs of

electrical ligh!ng and similar equipment

EN 61547:2009 Equipment for general ligh!ng purposes. EMC immunity requirements

EN 61000-3-2:2014 Electromagne!c compa!bility (EMC). Limits. Limits for harmonic current

emissions (equipment input current up to and including 16 A per phase)

Class A

EN 61000-3-3:2008 Electromagne!c compa!bility (EMC). Limits. Limita!on of voltage changes,

voltage ﬂuctua!ons and ﬂicker in public low-voltage supply systems, for

equipment with rated current <= 16 A per phase and not subject to

condi!onal connec!on

Restric!on of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Direc!ve

(RoHS2) 2011/65/EU:

These product(s) do not contain any of the following substances, or they contain trace amounts below

allowable or measureable levels in each component or mechanically separable part:

Lead (Pb), Mercury(Hg), Cadmium (Cd), Hexavalent Chromium (Cr6+),

Polybrominated Biphenyls (PBB), Polybrominated Diphenyl Ether (PBDE)

Other manuals for Releve Spot

Table of contents

Other ETC Dj Equipment manuals

ETC

ETC Source Four Mini LED User manual

ETC

ETC Desire D40 User manual

ETC

ETC Source Four PARNel User manual

ETC

ETC Source Four jr User manual

ETC

ETC Source Four PARN User manual

ETC

ETC Source Four PAR User manual

ETC

ETC High End Systems SHOWGUN Manual

ETC

ETC ColorSource Spot jr v2.0 User manual

ETC

ETC ColorSource Spot V 1.0 User manual

ETC

ETC Source Four LED Series User manual

ETC

ETC Source Four LED Series User manual

ETC

ETC Source 4WRD User manual

ETC

ETC Desire series User manual

ETC

ETC Desire series Configuration guide

ETC

ETC Desire D22 User manual

ETC

ETC SolaPix 19 XT User manual

ETC

ETC ColorSource Spot User manual

ETC

ETC Source Four jr User manual

ETC

ETC Source Four XT HID Zoom Grid Louver User manual

ETC

ETC Source 4WRD User manual

ETC

ETC ColorSource Linear User manual

ETC

ETC ColorSource User manual

ETC

ETC Desire XTI Series User manual

ETC

ETC F-Drive R12 Series User manual

Popular Dj Equipment manuals by other brands

ALPHA LITE

ALPHA LITE ALPHA 1500 User manual book

Chauvet

Chauvet OVATION E-930VW Quick reference guide

Zumtobel

Zumtobel APHRODITE Home Instructions for use

Snow Masters

Snow Masters Zig Oscillator user manual

EuroLite

EuroLite 50530554 user manual

Beamz

Beamz BUV243 user manual

thomann

thomann Stairville DJ Lase 40-G MK-III user manual

Eagletone

Eagletone 6 Eyes Flower user manual

EuroLite

EuroLite FLD-1508 user manual

Technical Pro

Technical Pro LG8xSEA user manual

JB Systems

JB Systems Lounge Laser DMX Operation manual

Lightmaxx

Lightmaxx Vega Halo 90 user manual

Elation

Elation FUZE WASH Z350 user manual

Maverick

Maverick MK3 WASH Quick reference guide

Infinity

Infinity TF-260C7 Fresnel manual

Chauvet

Chauvet EVE E-50Z Quick reference guide

Eliminator Lighting

Eliminator Lighting E 138 manual

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC user manual