ESAB ESABMig C280 User manual

Valid for serial no. 225, 2240349 301 045 040721

ESABMig C280

ESABMig C340

Bruksanvisning

Brugsanvisning

Bruksanvisning

Käyttöohjeet

Instruction manual

Betriebsanweisung

Manuel d’instructions

Gebruiksaanwijzing

Instrucciones de uso

Istruzioni per l’uso

Manual de instruções

 

 

  

 

−2 −

Rätt till ändring av specifikationer utan avisering förbehålles.

Ret til ændring af specifikationer uden varsel forbeholdes.

Rett til å endre spesifikasjoner uten varsel forbeholdes.

Oikeudet muutoksiin pidätetään.

Rights reserved to alter specifications without notice.

Änderungen vorbehalten.

Sous réserve de modifications sans avis préalable.

Recht op wijzigingen zonder voorafgaande mededeling voorbehouden.

Reservado el derecho de cambiar las especificaciones sin previo aviso.

Ci riserviamo il diritto di variare le specifiche senza preavviso.

Reservamo−nos o direito de alterar as especificações sem aviso prévio.

      

     

         

      

SVENSKA 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DANSK 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NORSK 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SUOMI 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ENGLISH 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DEUTSCH 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FRANÇAIS 69. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NEDERLANDS 80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ESPAÑOL 91. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ITALIANO 102. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PORTUGUÊS 113. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

 !                                            

!"#$% &'(                                                

)*#$+ &,-                                                

./0+/1 &(2                                               

ENGLISH

−47 −

TOCe

1 DIRECTIVE 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 SAFETY 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 INTRODUCTION 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Equipment 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 TECHNICAL DATA 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1 ESABMig C280 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2 ESABMig C340 51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 INSTALLATION 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1 Placing 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2 Assembly of components 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3 Electrical installation 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.4 Mains power supply 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 OPERATION 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1 Connection and control devices 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2 Function explanation 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 MAINTENANCE 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.1 Inspection and cleaning 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8 FAULT TRACING 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9 ORDERING OF SPARE PARTS 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DIAGRAM 168. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WEAR COMPONENTS 173. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ACCESSORIES 176. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−48 −

2834e

1 DIRECTIVE

DECLARATION OF CONFORMITY

ESAB Welding Equipment AB, S−695 81 Laxå, Sweden, gives its unreserved guarantee that welding

power source ESABMig C280 & ESABMig C340 from serial number 225, 224 complies with standard

IEC/EN 60974−1, in accordance with the requirements of directive (73/23/EEC) and addendum

(93/68/EEC) and with standard EN 50199 in accordance with the requirements of directive

(89/336/EEC) and addendum (93/68/EEC).

−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

Henry Selenius

Vice President

ESAB Welding Equipment AB

695 81 LAXÅ

SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411924

Laxå 2003−03−10

2 SAFETY

Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who

works on or near the equipment observes all the relevant safety precautions. Safety precautions

must meet the requirements that apply to this type of welding equipment. The following recommen-

dations should be observed in addition to the standard regulations that apply to the workplace.

All work must be carried out by trained personnel well−acquainted with the operation of the welding

equipment. Incorrect operation of the equipment may lead to hazardous situations which can result

in injury to the operator and damage to the equipment.

1. Anyone who uses the welding equipment must be familiar with:

Sits operation

Slocation of emergency stops

Sits function

Srelevant safety precautions

Swelding

2. The operator must ensure that:

Sno unauthorised person is stationed within the working area of the equipment when it is

started up.

Sno−one is unprotected when the arc is struck

3. The workplace must:

Sbe suitable for the purpose

Sbe free from draughts

4. Personal safety equipment

SAlways wear recommended personal safety equipment, such as safety glasses, flame−proof

clothing, safety gloves.

SDo not wear loose−fitting items, such as scarves, bracelets, rings, etc., which could become

trapped or cause burns.

5. General precautions

SMake sure the return cable is connected securely.

SWork on high voltage equipment may only be carried out by a qualified electrician.

SAppropriate fire extinquishing equipment must be clearly marked and close at hand.

SLubrication and maintenance must not be carried out on the equipment during operation.

−49 −

2834e

WARNING

READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.

ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-

TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE

BASED ON MANUFACTURERS’ HAZARD DATA.

ELECTRIC SHOCK −Can kill

SInstall and earth the welding unit in accordance with applicable standards.

SDo not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.

SInsulate yourself from earth and the workpiece.

SEnsure your working stance is safe.

FUMES AND GASES −Can be dangerous to health

SKeep your head out of the fumes.

SUse ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone

and the general area.

ARC RAYS −Can injure eyes and burn skin.

SProtect your eyes and body. Use the correct welding screen and filter lens and wear protective

clothing.

SProtect bystanders with suitable screens or curtains.

FIRE HAZARD

SSparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.

NOISE −Excessive noise can damage hearing

SProtect your ears. Use earmuffs or other hearing protection.

SWarn bystanders of the risk.

MALFUNCTION −Call for expert assistance in the event of malfunction.

PROTECT YOURSELF AND OTHERS!

WARNING!

Read and understand the instruction manual

before installing or operating.

Do not use the power source for thawing frozen pipes.

WARNING!

This product is solely intended for arc welding.

−50 −

2834e

3 INTRODUCTION

ESABMig C280 & ESABMig C340 are step controlled power sources in a compact

design, intended for welding with solid steel, stainless steel or aluminium wire as well

as tubular wire with or without shielding gas.

The possibility of welding with homogeneous wire/shielding gas and welding with

gasless tubular wire is obtained by switching the + and −connections on the

switching terminal above the wire feed unit.

ESAB’s accessories for the product can be found on page 176.

3.1 Equipment

3.1.1 ESABMig C280

The power source is supplied with:

SWelding gun PSF 250 −3m (ESABMig C280 4WD −4,5m)

SReturn cable 3,5m with return clamp (ESABMig C280 4WD −5m)

SShelf for gas cylinder

SInstruction manual

3.1.2 ESABMig C340

The power source is supplied with:

SWelding gun PSF 305 −3m (ESABMig C340 4WD −4,5m)

SReturn cable 3,5m with return clamp (ESABMig C340 4WD −5m)

SShelf for gas cylinder

SInstruction manual

4 TECHNICAL DATA

4.1 ESABMig C280

Voltage 400−415 V, 3∼50/60 Hz 230/400−415/500V3∼50Hz

230/440−460V, 3∼60Hz

Permissible load at

100% duty cycle 150 A/22 V 150 A/22 V

60 % duty cycle 190 A/24 V 190 A/24 V

30 % duty cycle 280 A/28 V 280 A/28 V

Setting range (DC) 30A/15V−280A/28V 30A/15V−280A/28V

Open circuit voltage 15−38 V 15−38 V

Open circuit power 190 W 190 W

Efficiency 69% 69%

Power factor 0.97 0.97

Control voltage 42 V, 50/60 Hz 42 V, 50/60 Hz

Wire feed speed 1,9 −19m/min 1,9 −19m/min

−51 −

2834e

Burnback time 0 −0,25s 0 −0,25s

Spot welding 0,2 −2,5s 0,2 −2,5s

Welding gun connection EURO EURO

Dimensions lxwxh 840x425x830 840x425x830

Weight 91 kg 91 kg

Operating temperature −10 to +40oC−10 to +40oC

Enclosure class IP 23 IP 23

Application classification

4.2 ESABMig C340

Voltage 400−415 V, 3∼50/60 Hz 230/400−415/500V3∼50Hz

230/440−460V, 3∼60Hz

Permissible load at

100% duty cycle 195 A/24 V 195 A/24 V

60 % duty cycle 250 A/27 V 250 A/27 V

30 % duty cycle 340 A/31 V 340 A/31 V

Setting range (DC) 40A/16V−340A/31V 40A/16V−340A/31V

Open circuit voltage 16−40 V 16−40 V

Open circuit power 240 W 240 W

Efficiency 77% 77%

Power factor 0.95 0.95

Control voltage 42 V, 50/60 Hz 42 V, 50/60 Hz

Wire feed speed 1,9 −20m/min 1,9 −20m/min

Burnback time 0 −0,5s 0 −0,5s

Creep start OFF / ON OFF / ON

2/4 stroke 2 / 4 2 / 4

Welding gun connection EURO EURO

Dimensions lxwxh 840x425x830 840x425x830

Weight 114 kg 114 kg

Operating temperature −10 to +40oC−10 to +40oC

Enclosure class IP 23 IP 23

Application classification

Duty cycle

The duty cycle refers to the time as a percentage of a ten−minute period that you can weld at a cer-

tain load without overloading.

Enclosure class

The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid

objects or water. Equipment marked IP23 is designed for indoor and outdoor use.

Application class

The symbol indicates that the power source is designed for use in areas with increased

electrical hazard.

−52 −

2834e

5 INSTALLATION

The installation must be executed by a professional.

WARNING!

This product is intended for industrial use. In a domestic environment this product may cause radio

interference. It is the user’s responsibility to take adequate precautions.

5.1 Placing

Position the welding power source such way that its cooling air inlets and outlets are

not obstructed.

5.2 Assembly of components

During transport, the rear wheels of the power source are in their forward position.

Before use, place the wheels in their rear position.

WARNING!

−53 −

2834e

5.3 Electrical installation

−54 −

2834e

5.4 Mains power supply

Check that the unit is connected to the correct mains power supply voltage, and that

it is protected by the correct fuse size. A protective earth connection must be made,

in accordance with regulations.

Rating plate with supply connection data

ESABMig C280 3∼ 50 Hz 3∼ 50/60 Hz 3∼ 50 Hz 3∼ 60 Hz 3∼ 60 Hz

Voltage V 230 400/415 500 230 440−460

Current A

at 100% duty cycle 13 7 5 11 7

at 60% duty cycle 18 10 8 18 10

at 30% duty cycle 27 18 13 27 17

Cable area mm24 x 2.5 4 x 1.5 4 x 1.5 4 x 2.5 4 x 1.5

Fuse slow A 20 16 16 20 16

ESABMig C340 3∼ 50 Hz 3∼ 50/60 Hz 3∼ 50 Hz 3∼ 60 Hz 3∼ 60 Hz

Voltage V 230 400/415 500 230 440−460

Current A

at 100% duty cycle 16 9 7 16 8

at 60% duty cycle 24 14 11 23 12

at 30% duty cycle 35 21 17 34 18

Cable area mm24 x 4 4 x 2.5 4 x 2.5 4 x 4 4 x 2.5

Fuse slow A 20 16 16 20 16

NB: The mains cable areas and fuse sizes as shown above are in accordance with Swedish

regulations. They may not be applicable in other countries: make sure that the cable area and fuse

sizes comply with the relevant national regulations.

This manual suits for next models

Table of contents

Other ESAB Welding System manuals

ESAB

ESAB ARC250i User manual

ESAB

ESAB PowerCut 1600 User manual

ESAB

ESAB WARRIOR EDGE 500 User manual

ESAB

ESAB PT-31XL User manual

ESAB

ESAB Warrior 500i CC/CV User manual

ESAB

ESAB MXH 300PP User manual

ESAB

ESAB Fabricator 181i User manual

ESAB

ESAB PowerCut-550 User manual

ESAB

ESAB Aristo Mig U4000i User manual

ESAB

ESAB TAE 800 User manual

ESAB

ESAB LHJ 750 User manual

ESAB

ESAB Warrior 500 User manual

ESAB

ESAB Aristo Mig 5000i 400 V User manual

ESAB

ESAB Origo Arc 456 Series Guide

ESAB

ESAB CIGWELD WeldSkill MicroArc 140 User manual

ESAB

ESAB fabricator 211i User manual

ESAB

ESAB Caddy Mig C200i User manual

ESAB

ESAB A6 TFD1 Instructions for use

ESAB

ESAB Aristo Origo Feed 4804 User manual

ESAB

ESAB PowerCut 1300 User manual

ESAB

ESAB Origo M11 Feed 302 User manual

ESAB

ESAB EMP 215ic User manual

ESAB

ESAB Aristo Origo Feed 3004 User manual

ESAB

ESAB Rogue ES 130i PRO User manual

Popular Welding System manuals by other brands

Berner

Berner PLASMACUT 54 instruction manual

Pro Spot

Pro Spot PR-155 Assembly instructions

Forney

Forney 210 operating manual

Thermal Arc

Thermal Arc 400S operating manual

Lincoln Electric

Lincoln Electric HANDYMIG 170I Operator's manual

GYS

GYS PROTIG 201 AC/DC Original instructions

TAFA

TAFA 30*8B35 owner's manual

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Technical specifications

CIGWELD

CIGWELD 636804 use instructions

Red-D-Arc

Red-D-Arc DC-400 Operator's manual

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 owner's manual

Elettro

Elettro HI-MIG 3000 SYNERGIC instruction manual

WIA

WIA Weldmatic 270 CP132-2 Operator's manual

Sonics

Sonics H520T instruction manual

Miller

Miller Big Blue 400D owner's manual

NewArc

NewArc RT2000 Operational manual

Hypertherm

Hypertherm powermax1000 Operator's manual

Lincoln Electric

Lincoln Electric POWER WAVE I400 Operator's manual