ERNITEC Orion DX 832 IR User manual

User’s Manual

Orion DX 832 IR

User’s Manual – Orion DX 832IR

www.ernitec.com

V 01280219

Caution and Preventive Tips

Important Information

Before proceeding, please read and observe all instructions and warnings in this manual.

Retain this manual with the original bill of sale for future reference and, if necessary,

warranty service. When unpacking your unit, check for missing or damaged items. If any

item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT.

Contact your dealer for assistance.

•Handle with care, do not drop the unit

•Mount the unit in an equipment rack or place it on a solid, stable surface

•Indoor use only. Do not place the unit in a humid, dusty, oily, or smoky site

•Do not place it in an area with poor ventilation or in an area close to fire or other

sources of heat. Doing so may damage the unit as well as cause fire or an electric

shock

•When cleaning is necessary, shut down the system and unplug the unit from the

outlet before uncovering the top cover. Do not use liquid cleaners or aerosol cleaners.

Use only a damp cloth for cleaning

•Always shut down the system prior connecting or disconnecting accessories, with

the exception of USB devices

Under copyright laws, the contents of this user manual may not be copied, photocopied,

translated, reproduced or reduced to any electronic medium or machine-readable format, in

whole or in part, without prior written permission of the company.

Important Information

Before proceeding, please read and observe all instructions and warnings in this manual.

Retain this manual with the original bill of sale for future reference and, if necessary, warranty

service. When unpacking your unit, check for missing or damaged items. If any item is

missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT.

Contact your dealer for assistance.

www.ernitec.com

V 01280219

User’s Manual – Orion DX 832IR

Regulation

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

This symbol on the product or on its packaging indicates that this product

shall

not be treated as household waste in accordance with Directive

2002/96/EC. Instead it shall be handed over to the applicable collection

point for the recycling of electrical and electronic equipment. By proper

waste handling of this product you ensure that

it has no negative

consequences for the environment and human health, which could

otherwise be caused if this product is thrown into the garbage bin. The

recycling of materials will help to conserve natural resources.

For more details information about recycling of this product, please contact

your local city office, your household waste disposal service or the shop

where you purchased the product.

This symbol intends to alert the user to the presence of unprotected

“Dangerous Voltage” within the product’

s enclosure that may be strong

enough to cause a risk of electric shock.

This symbol intends to alert the user to the presence of important operating

and maintenance (servicing) instructions in the literature accompanying the

appliance.

Compliance is evidenced by written declaration from our suppliers, assuring

that any potential trace contamination levels of restricted substances are

below the maximum level set by EU Directive 2002/95/EC, or are exempted

due to their application.

User’s Manual – Orion DX 832IR

www.ernitec.com

V 01280219

Table of Contents

1. Overview .................................................................................................................................. 4

1.1 Features ........................................................................................................................ 4

1.2 Package Contents ......................................................................................................... 5

1.3 Dimensions.................................................................................................................... 6

1.4 Connectors .................................................................................................................... 7

2. Camera Cabling....................................................................................................................... 8

2.1 Power Connection ......................................................................................................... 9

2.2 Ethernet Cable Connection ........................................................................................... 9

2.3 Audio / AIarm I/O & RS-485 Connection ..................................................................... 10

3. System Requirements .......................................................................................................... 11

4. Access Camera ..................................................................................................................... 12

5. Setup Video Resolution........................................................................................................ 15

6. Configuration Files Export / Import..................................................................................... 16

7. Tech Support Information .................................................................................................... 17

7.1 Delete the Existing Ernitec Viewer .............................................................................. 17

7.2 Setup Internet Security................................................................................................ 18

www.ernitec.com

V 01280219

User’s Manual – Orion DX 832IR

1. Overview

With the latest encoding technology and built-in IR LEDs, Orion DX 832IR Network IR

PTZ Camera presents strong HDR and high sensitivity performance, and is capable of

capturing high resolution images during daylight hours and even, in pitch-black darkness.

At night, or in any low/zero lighting environments, 831-R2 is able to provide effective

illumination to the objects 200 meters away, and also delivers crystal clear images with

high quality up to 40x optical zoom lens in long distance.

With delicate mechanism design, 831-R2 features Servo Feedback technology, which

makes the camera precisely return to the previous position without stalling, and ensures

the target monitoring region is fully secured. IP66 International standard is also

guaranteed for outdoor installation. Furthermore, combining 0 downtime power

switching (ZDT) technology, the camera ensures smooth streaming without sudden

power-loss.

1.1 Features

Multiple Progressive Scan CMOS Sensor Support up to 4M Resolution

Up to 40x Optical Zoom

Multi Exposure HDR

Electrical Image Stabilizer (EIS) Support

Multi Codec Support (H.265 / H.264 / MJPEG)

Low Latency Streaming

Quad Streams Support

True Day/Night Function (ICR)

IR LED (Working Distance up to 200m)

BNC Analog Output for Installation Support

RS-485 Support

3D Motion Compensated Noise Reduction (MCTF)

Smart Event Function- External Input/ Motion Detection/ Network Failure

Detection/ Periodical Event/ Manual Trigger/ Audio Detection

Text Overlay and Privacy Masks

Micro SD/SDHC/SDXC Card Support

ONVIF Profile S/G/Q Support

Smart Low Bitrate Control

Weatherproof (IP66)

Servo Feedback – Guarantees No Drifting

Zero-Down-Time(ZDT) Power Switching

User’s Manual – Orion DX 832IR

www.ernitec.com

V 01280219

1.2 Package Contents

Please check the box contains the items listed here. If any item is missing or has

defects, DO NOT install or operate the product and contact the dealer for

assistance.

Orion DX 832IR

Network IR PTZ Camera

Quick Guide

M4 Security Screw

with Rubber

2-Pin Power

Terminal Block (DC12V Use)

3-Pin Power

Terminal Block (AC 24V Use)

14-Pin Alarm/Audio I/O

Terminal Block

NOTE: To use an external power supply, please contact the camera

manufacturer to confirm that the power supply uses the same power

specifications as the camera. The power supply must comply with the LPS

requirements.

NOTE: Do not replace batteries of the camera. Risk of explosion may

occur if the battery is replaced by an incorrect type.

www.ernitec.com

V 01280219

User’s Manual – Orion DX 832IR

1.3 Dimensions

User’s Manual – Orion DX 832IR

www.ernitec.com

V 01280219

1.4 Connectors

Refer to the diagrams below for the positions of the reset button and various

connectors of the camera. Definition of the reset button and the connectors are

given as follow.

No.

Connector

Definition

Power Connector

(DC12V) DC12V power connection

2 RJ-45 Port *

For network and UPoE connections

Power Connector

(AC24V) AC24V power connection

4 Reset Button

Press the button with a proper tool for at least 20

seconds to restore the system.

Audio/Alarm I/O &

RS-485 Connector ** Audio/Alarm I/O & RS-485 connection

6 BNC For analog video output

7 SD Card Slot

Insert the SD card into the card slot to store videos

and snapshots. Do not remove the SD card when the

camera is powered on.

*Please contact the manufacturer for compatible PoE injector.

**Do NOT connect external power supply to the alarm I/O connector of the camera.

NOTE: It is not recommended to record with the SD card for 24/7

continuously, as it may not be able to support long term continuous data

read/write. Please contact the manufacturer of the SD card for information

regarding the reliability and the life expectancy.

www.ernitec.com

V 01280219

User’s Manual – Orion DX 832IR

2. Camera Cabling

The outdoor models are being IP66-rated to prevent water from entering the

camera. However, water might still enter the camera if it is being improperly

installed. Please make sure the warnings below are strictly followed when

installing the camera.

NOTE: This camera must be installed by qualified personnel and the

installation should conform to all local codes.

Place all cables and the adaptor in dry and well-waterproofed

environments, e.g. waterproof boxes. The purpose is to prevent moisture

accumulation inside the camera and moisture penetration into cables.

While running cables, slightly bend the cables to a U-shaped curve to

make a low point (as demonstrated in the figures below). The purpose is

to prevent water from entering the camera along the cables from above.

The cable entry hole of the outdoor mounting kit (indicated in the figure

below) needs to be sealed with thread seal tape to avoid water from

entering the camera.

User’s Manual – Orion DX 832IR

www.ernitec.com

V 01280219

2.1 Power Connection

To power up the camera, connect the DC12V or AC24V power adaptor to the

power connector of the camera and the power outlet. Refer to the diagram and

pin definition below for AC24V power connection.

Pin Definition

1 AC24V L

2 GND

3 AC24V N

Alternatively, users can use an Ethernet cable and connect it to the RJ-45 port

of the camera and an UPoE 60W switch.

Zero Downtime Power Switching (ZDT)

When users connect DC12V power jack and the RJ-45 port at the same time,

the power input comes from the DC12V connector. If the DC12V power source

fails, the camera will switch power input seamlessly to the RJ-45 port until the

DC12V power source is restored.

2.2 Ethernet Cable Connection

To connect one end of the Ethernet cable to the RJ-45 connector of the camera,

and plug the other end of the cable to the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when

connecting the camera directly to the PC.

NOTE: Check the status of both power and network activity indicator

LEDs. If either LED is unlit, please check the corresponding connection.

Green Power LED lights up when the camera is powered up.

Orange Network LED (1) flashes when data is being transmitted

over network, (2) lights up for good network connection.

Table of contents

Other ERNITEC Security Camera manuals

ERNITEC

ERNITEC MicroView MVIC-04IR-E User manual

ERNITEC

ERNITEC MicroView MVCLOUD-201 User manual

ERNITEC

ERNITEC Orion User manual

ERNITEC

ERNITEC MicroView MVID-03IR-E User manual

ERNITEC

ERNITEC DS-2CD6924G0-IHS User manual

ERNITEC

ERNITEC MicroView MVIB-04IR-E User manual

ERNITEC

ERNITEC MicroView MVCLOUD-201 User manual

ERNITEC

ERNITEC Orion SX Series User manual

ERNITEC

ERNITEC MicroView MVIB-01IR-E User manual

ERNITEC

ERNITEC MicroView MVCLOUD-101 User manual

ERNITEC

ERNITEC MVID-04IR-E User manual

ERNITEC

ERNITEC Orion/2 Guide

ERNITEC

ERNITEC EVA 101 User manual

ERNITEC

ERNITEC Orion/2 User manual

ERNITEC

ERNITEC Hawk SX User manual

ERNITEC

ERNITEC SX User manual

ERNITEC

ERNITEC Orion DX 3 User manual

ERNITEC

ERNITEC MERCURY SX 5TH GENERATION User manual

ERNITEC

ERNITEC MicroView MVIB-01IR-E User manual

ERNITEC

ERNITEC ECB Series User manual

ERNITEC

ERNITEC SX Series User manual

ERNITEC

ERNITEC Mercury SX32 Series User manual

ERNITEC

ERNITEC Mercury SX4 series User manual

ERNITEC

ERNITEC Orion/3-DN Outdoor Assembly Instructions

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications