Ericsson A1018 User manual

NotforCommercialUse

EricssonMobileCommunicationsAB

Contents

at a Glance

Getting Started 3

Preparing Your Phone for Use 4

Turning Your Phone On and Off 10

Display Information and Key Functions 12

Making and Receiving Calls 14

During a Call 17

Functions and Settings 19

Using the Menu System 20

Your Personal Phone Book 23

Using the Call List 28

Your Voice Mail Service 30

Personalizing Your Phone 32

Sending and Receiving Text Messages (SMS) 37

Diverting Incoming Calls 45

Security for Your Phone and Subscription 47

Handling More than One Call Simultaneously 53

Setting Network Preferences 58

Knowing the Call Time/Call Cost 62

Using Two Voice Lines 64

Calling from Your Car 66

Calling Card or Credit Card Calls 68

Sending and Receiving Faxes and Data 70

Some Useful Functions 71

Additional Information 73

Troubleshooting 74

Quick Keys 76

Technical Data 77

Glossary 78

Guidelines for Safe and Efficient Use 83

Warranty 89

Declaration of Conformity 91

Index 93

Ericsson A1018s

Second edition (November 1999)

This manual is published

by Ericsson Mobile Communications AB,

without any warranty. Improvements

and changes to this manual necessitated

by typographical errors, inaccuracies

of current information, or improvements to

programs and/or equipment, may be made

by Ericsson Mobile Communications AB

at any time and without notice. Such

changes will, however, be incorporated

into new editions of this manual.

©Ericsson Mobile Communications AB,

1999

Publication number: EN/LZT 108 2597 R2A

Printed in Sweden

INNOVATRON PATENTS

NotforCommercialUse

EricssonMobileCommunicationsAB

Please note!

Some of the services in this manual are not supported by all net-

works. This also applies to the GSM International Emergency

Number 112.

Please contact your network operator or service provider if you are

in doubt whether you can use a particular service or not.

The symbol on our products signifies that they have been cer-

tified according to the EMC directive 89/336/EEC, the Telecom-

munications directive 91/263/EEC, and the Low Voltage directive

73/23/EEC when applicable. The products fulfil the requirements

according to the following standards:

Cellular Phones and Accessories in Combination:

ETS 300 342-1 EMC for European digital cellular telecommunica-

tions.

Accessories Without Direct Connection to a Cellular Phone:

EN 50081 Electromagnetic compatibility, Generic Emission Stan-

dard, and EN 50082 Electromagnetic compatibility, Generic

Immunity Standard.

NotforCommercialUse

EricssonMobileCommunicationsAB

GETTING STARTED

Preparing Your Phone for Use 4

Turning Your Phone On and Off 10

Display Information and Key Functions 12

Making and Receiving Calls 14

During a Call 17

NotforCommercialUse

EricssonMobileCommunicationsAB

4 Preparing Your Phone for Use

Preparing Your Phone

for Use

Overview

Front

Back

Keypad

Earpiece

Display

Indicator light

Microphone

Antenna

Battery

release catch

NotforCommercialUse

EricssonMobileCommunicationsAB

Preparing Your Phone for Use 5

Assembly

You need to do the following to use your phone:

•insert the SIM card

•attach the battery to the phone

•charge the battery

The SIM Card

When you register as a subscriber with a network operator, you get a

SIM (Subscriber Identity Module) card. The SIM card contains a

computer chip that keeps track of your phone number, the services

included in your subscription, and your Phone Book information,

among other things.

SIM cards come in two sizes. One is the size of a credit card, and the

other is smaller. Your phone uses the smaller card. Many credit card-

sized SIM cards have a perforated smaller card that you can take out

easily. Before you can use your phone, you must insert the SIM card

as shown below.

Inserting the SIM Card

2. Slide the SIM card down into

the SIM card slot with the

golden connectors facing

down and the cut corner

turned to the left.

1. Remove the battery

(if attached).

NotforCommercialUse

EricssonMobileCommunicationsAB

6 Preparing Your Phone for Use

Removing the SIM Card

The PIN

Most SIM cards are supplied with a security code or PIN (Personal

Identity Number), which you need to access the network. Every time

you turn on your phone, it prompts you to enter your PIN. You will

find your PIN in the information from your operator.

Some operators may have services that require a second PIN, your

PIN2.

You should be careful with your PIN, since it is your protection

against unauthorized use of your subscription.

If your PIN is entered incorrectly three times in a row, the SIM card is

blocked. If this happens, you can unlock it by using your PUK (Per-

sonal Unblocking Key code), which you also get from your operator.

2. Lift the top of the SIM card

andpushthecardoutofthe

slot.

1. Remove the battery

(if attached).

NotforCommercialUse

EricssonMobileCommunicationsAB

Preparing Your Phone for Use 7

The Battery

Your phone comes with a nickel metal hydride (NiMH) battery.

The battery is not charged when you buy your phone, but there may

be enough power to turn the phone on. We recommend that you

charge the battery before you use the phone for the first time.

Attaching the Battery to your Phone

When to Charge the Battery

The nickel metal hydride battery that comes with your phone can be

charged whenever you wish, without affecting its performance. This

is not the case with the cheaper nickel cadmium type batteries, often

sold as accessories by other suppliers. For the best talk and standby

time in the long run, we recommend that you use only Ericsson origi-

nal batteries with your phone.

To remind you that you will soon need to charge the battery or

replace it with a charged one:

•an alarm signal (a long beep) sounds and the message

Battery low

appears for ten seconds in the display – the signal is repeated sev-

eral times,

•the indicator light on the top of the phone starts flashing red.

Note! The phone turns itself off when the battery can no longer power

it satisfactorily.

•Place the battery on the back of the phone and push until you hear

a click.

NotforCommercialUse

EricssonMobileCommunicationsAB

8 Preparing Your Phone for Use

Charging the Battery

To indicate charging:

•the battery meter in the display pulses continuously,

•the indicator on the top of the phone shows a steady red light

(or green, if the phone is turned on).

When the battery is fully charged, the battery meter in the display is

full and the indicator on the top of the phone shows a steady green

light.

Tip! You can use the phone while the battery is being charged.

However, this increases the charging time.

Disconnecting the Charger

3. Connect the charger to the

phone as shown in the pic-

ture. The flash symbol on the

plug must face upwards.

1. Make sure that the battery is

attached to the phone.

2. Connect the charger to the

mains.

•Bend the plug connected to the phone upwards and pull it out.

NotforCommercialUse

EricssonMobileCommunicationsAB

Preparing Your Phone for Use 9

Removing the Battery

Changing the Front Panel

3. Lift the battery up and away

from the phone.

1. Turn off the phone.

2. Press the catch on the bottom

of the battery.

1. Lift the bottom end of the

front panel.

2. Remove the panel.

3. Fit the top of the new front

panel to the phone.

4. Press the panel into place.

4.2.

NotforCommercialUse

EricssonMobileCommunicationsAB

10 Turning Your Phone On and Off

Turning Your Phone On

and Off

Turning Your Phone On

•PressandholdtheNO (ON/OFF) key until you hear a click.

If “Enter PIN” Appears in the Display

Some SIM cards are protected with a PIN code. If

Enter PIN

appears in

the display after you have turned on the phone, do this:

1. Enter your PIN. If you make a mistake while entering your PIN,

erase the wrong digit by pressing the CLR key.

2. Press YES.

Note! If your PIN is entered incorrectly three times in a row, the SIM

card is blocked. You can unblock it by using your PUK, see “Security

for Your Phone and Subscription” on page 47.

Network Search

After you have turned on the phone (and entered your PIN), the

Ericsson logo appears in the display and the phone searches for a net-

work.

When a network is found, the phone beeps three times. The indicator

light on the top of the phone flashes green once every second and

your network operator’s name (in most cases abbreviated) appears in

the display.

This is called standby mode. You can now make and receive calls.

Initial Settings

The first time you turn on your phone, you may want to change the

language in the display, choose the ring signal type and set the clock.

For more information about these settings, see “Personalizing

Your Phone” on page 32.

Display Language

Most modern SIM cards automatically set the display language to the

language of the country where you bought your SIM card. If this is

Enter

PIN ****

NETWORK

00:00

Other manuals for A1018

This manual suits for next models

Table of contents

Other Ericsson Cell Phone manuals

Popular Cell Phone manuals by other brands

Zte

Zte BLADE A520 quick start guide

Nokia

Nokia Lumia 620 user guide

Blackbe;rry

Blackbe;rry KEYone Safety and product information

Bea-fon

Bea-fon X5 Premium quick guide

Blackbe;rry

Blackbe;rry 8707 Series user guide

Blackbe;rry

Blackbe;rry Storm Troubleshooting

LG LM-X420QN user guide

LifeWatch

LifeWatch V user guide

Bea-fon

Bea-fon SILVER LINE SL860 user guide

IKI Mobile

IKI Mobile KF4.5i user manual

Hitech

Hitech HT-850 user guide

Yezz

Yezz Fashion F10 user manual

Point Mobile

Point Mobile PM60 user manual

Blackbe;rry

Blackbe;rry Q10 user guide

Blackbe;rry

Blackbe;rry Bold 9900 user guide

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 user guide

LG LM-K420EMW user guide

ISAFE MOBILE

ISAFE MOBILE IS655.2 operating manual