Epson Stylus 1000 User manual

User’s Guide

1000

Stylus

™

=--TM

Esr

z=::=

---A

EPSON=-

EPSON

Printer

Parts

control panel

paper feeder

paper support

manual feed slot

parallel interface

access panel

-J.L

AC inlet

EPSON

48-NOZZLE

INK JET PRINTER

Stylus

1000

system, or transmitted in any form or by any means, mechanical, photocopying,

recording, or otherwise, without the prior written permission of Seiko Epson Corporation.

No patent liability is assumed with respect to the use of the information contained herein.

Neither is any liability assumed for damages resulting from the use of the information

contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this

product or third parties for damages, losses, costs, or expenses incurred by purchaser or

third parties as a result of: accident, misuse, or abuse of this product or unauthorized

modifications, repairs, or alterations to this product, or (excluding the US) failure to

strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable against any damages or problems arising from

the use of any options or any consumable products other than those designated as

Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Epson and Epson

ESC/P

are registered trademarks and Epson

ESC/P

2 is a trademark of

Seiko Epson Corporation.

Helvetica and Times are trademarks of Linotype AG and/or its subsidiaries.

LocalTalk is a trademark of Apple Computer, Inc.

1993

by Seiko Epson Corporation

Nagano,

Japan

User’s Guide

Important Safety Instructions

Read all of these instructions before you set up your printer.

Follow all warnings and instructions marked on the printer.

Unplug the printer from the wall outlet before you clean it,

and use a damp cloth for cleaning, not liquid or aerosol

cleaners.

Do not use your printer near water or spill any liquid on it.

Do not place the printer on an unstable cart, stand, table, or

other surface that may allow the printer to fall.

Do not block any slots or openings in the cabinet. These are

provided for the ventilation necessary to ensure reliable

operation and protection from overheating. Placing the

printer on a bed, sofa, rug, or other similar surface may

block the openings. Also, do not place the printer in a

built-in installation unless proper ventilation is provided.

Never place the printer near or over a radiator or heat

Use the type of power source indicated on the label. If you

are not sure of the type of power available, consult your

dealer or local power company.

This printer may be equipped with a plug having a third

(grounding) pin, which fits only into a grounding-type

outlet. This is a safety feature. If you are unable to insert

the plug into the outlet, have an electrician replace your

obsolete outlet. Do not defeat the purpose of the

grounding-type plug.

10.

Do not put your printer where the cord will be walked on.

. . .

iii

11.

If you use an extension cord, make sure that the total of the

ampere ratings on the products plugged into the extension

cord does not exceed the extension cord’s ampere rating.

Also, make sure that the total of all products plugged into

the wall outlet does not exceed

amperes.

12.

Never push objects of any kind into your printer because

they may touch dangerous voltage points or short out parts

that could result in a risk of fire or electric shock.

13.

Except as specifically explained in the user’s manual, do not

attempt to repair the printer yourself. This could expose

you to dangerous voltage points or other risks. Refer all

servicing in those compartments to service personnel.

14.

Unplug the printer from the wall outlet and have it repaired

by a qualified service person under the following

conditions:

When the power cord or plug is damaged or frayed

If liquid has been spilled into it

If it has been exposed to rain or water

If it does not operate normally when the operating

instructions are followed. Adjust only those controls

that are covered by the operating instructions since

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the printer to normal

operation.

If it has been dropped or the cabinet has been damaged

If it exhibits a distinct change in performance, indicating

a need for service.

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio or

television reception. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause interference to radio and television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

QConsult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will

invalidate the FCC Certification of this device and may cause interference levels which

exceed the limits established by the FCC for this equipment. It is the responsibility of the

user to obtain and use a shielded equipment interface cable with this device. If this

equipment has more than one interface connector, do not leave cables connected to

unused interfaces. Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

For Canadian Users

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus as set out in the radio interference regulations of the Canadian

Department of Communications.

present

appareil

numerique

n’emet

pas de bruits

radioelectriques

depassant

les

limites

applicables

aux

appareils

numeriques

Classe

prescrites

dans

reglement

sur

brouillage

radioelectrique

edict6 par

Ministere

des

Communications

Canada.

Tips for Printing on Single Sheets

When you print on single sheets, you may notice that your

printer prints the first page of your file correctly but then

prints too low on the next page, or that it prints the last few

lines from one page onto the next.

These differences in print position are easy to adjust; you can

simply change some of the settings in your application

program as described below to get the right results.

When you install an application program, it normally asks

you what printer you are using. Make sure you choose the

correct printer. See Chapter 1 for, the right printer to

choose.

Many programs include an option to set the maximum lines

per page. If your program has a lines-per-page setting and

you are using

8.5

ll-inch

paper, set the lines per page to

61;

for

A4,

try

65.

Note:

Tofind the right lines-per-page settingfor paper that is not

8.5

12,

create

a test document using your application

program. Set

your top

and bottom margins to 0 and then create a file

numbered lines from

1 to

66.

When you print yourfile, notice the last number printed on

the first page. This is your maximum lines-per-page setting.

If your program doesn’t have a lines-per-page setting, try

decreasing the top margin or increasing the bottom

margin, or both, until you get the results you want.

You can also try adjusting the form length setting. For a

standard

8.5

ll-inch

page, try setting the form length at

inches

(10.5

inches for

A4).

Some programs also let you indicate whether you are using

single sheets or continuous paper. Make sure you choose

single sheets.

Contents

Introduction

Features

..............................

Options

.............................

HowtoUseThisManual

..................

Warnings, Cautions, and Notes

...............

Chapter 1 Setting Up the Printer

About Your Ink Jet Printer

......................l-2

A few precautions

.......................l-2

Choosing the right paper

..................

.1-4

Unpacking the Printer

........................

1-5

Attaching the paper support and the paper separators

. . l-6

Choosing a Place for the Printer

..................l-7

Plugging in the Printer

........................l-8

Installing the Ink Cartridge

.....................l-9

Loading Paper in the Paper Feeder

.................l-13

Testing the Printer

..........................l-15

Connecting the Printer to Your Computer

.............l-17

Setting Up Your Software Programs

................l-18

Chapter 2 Paper Handling

Printing on Single Sheets . . . . . . . . . . . . . . . . . . . . . . ,

2-2

Tips on using the paper feeder . . . . . . . . . . . . . . .

.2-2

Adjusting the loading position-Adjusting the

print position

Loading paper manually . . . . . . . . . . . . . . . . . . .

.2-5

Using Continuous Paper with Optional Push Tractor

.....

2-7

Installing the push tractor

..................

2-7

Loading continuous paper

..................

2-8

Tips on using continuous paper

...............

2-11

Using the tear-off feature

...................

2-12

Removing the push tractor

..................

2-13

Switching Between Continuous Paper and Single Sheets

...

2-14

Switching to single sheets

..................

2-14

Switching to continuous paper

...............

2-15

Printing on Special Paper

.....................

2-16

Envelopes

...........................

2-16

Printing on envelopes

Labels

..............................

2-18

Chapter 3

Using the Printer

Operating the Control Panel

....................

3-2

Indicator lights

.........................

3-2

Buttons

.............................

3-3

Selecting Character Fonts

.....................

3-5

Scalable fonts

.........................

3-6

Condensed printing

......................

3-7

Using the Default-Settings Mode

.................

3-7

Default settings descriptions

................

3-9

Character table -Auto print direction -

Continuous-paper page length -

Skip-over-perforation -Network interface mode

-Mixed text/graphics mode -Auto line feed -

Auto interface selection - Auto interface wait

time -Tear off

Changing the default settings

................

3-11

Optional Interface Cards

......................

3-15

Installing an interface card

..................

3-16

The

C82305*/C82306*

serialinterface card

........

3-17

Selecting a baud rate -Handshake timing -

Error handling

vii

Maintenance and Transportation

..................3-18

Replacing the ink cartridge

..................3-18

Cleaning the print head

....................3-20

Cleaning the printer

......................3-20

Transporting the printer

....................3-21

Troubleshooting

............................3-22

Error indicators

.........................3-22

Power supply

..........................3-24

Printing

..............................3-25

Paper handling

.........................

3-29

Clearing a paper jam-Preventing paper feeding

and paper jam problems

Appendix

Technical Specifications . . , . . . . . . . . . . . . . . . . . . . . A-2

Printer specifications . . . . . . . . . . . . . . . . . . . . . . A-2

Printing-Paper-Mechanical-Electrical-

Environmental-Safety approvals

Interface specifications . . . . . . . . . . . . . . . . . . . . . A-7

Specifications and pin assignments-Interface

timing

Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10

Default settings

Command Summary . . . . . . . . . . . . . . . . . . . . . . . . . A-11

Sending printer commands . . . . . . . . . . . . . . . . . . A-11

Using the command summary. . . . . . . . . . . . . . . . A-12

General operation-Paper feeding--Page

format-Print position motion-Font

selection-

Font enhancement-Spacing-Character

handling-Graphics-Bit image

Character Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . A-20

Glossary

Index

. . .

V111

Other manuals for Stylus 1000

Table of contents

Other Epson Printer manuals

Epson

Epson Stylus Photo PX830FWD Assembly instructions

Epson

Epson WF-2532 Instruction Manual

Epson

Epson 1520 - Stylus Color Inkjet Printer User manual

Epson

Epson Stylus Office BX305FW Plus User guide

Epson

Epson Artisan 1430 Instruction Manual

Epson

Epson Stylus Photo 750 User manual

Epson

Epson TM-T88III series Service manual

Epson

Epson AcuLaser C2900N User manual

Epson

Epson L90P - TM Two-color Thermal Line Printer User manual

Epson

Epson R300 - Stylus Photo Color Inkjet Printer User manual

Epson

Epson Stylus Pro 5000 User manual

Epson

Epson EPL-N4000 User manual

Epson

Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880... User manual

Epson

Epson Stylus Color IIs User manual

Epson

Epson Stylus Color 900 Manual

Epson

Epson LQ-2090 User manual

Epson

Epson SC-S80600L Series User manual

Epson

Epson ActionPrinter 4000X User manual

Epson

Epson FX-880 - Impact Printer User manual

Epson

Epson FX-880 - Impact Printer User manual

Epson

Epson TM-T88III series User manual

Epson

Epson Stylus Color 880 User manual

Epson

Epson LQ-850+ User manual

Epson

Epson WF-2960 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

IRA3D

IRA3D POETRY4 Original instructions

Ricoh

Ricoh Aficio AP400 operating instructions

BIXOLON

BIXOLON SRP-352plusV user manual