Enttec Pixel Octo User manual

 
 
Pixel Octo 
ETHERNET PIXEL DRIVER 
 
Contents
Package Contents ....................................................................1 
Safety Information .................................................................. 1 
LED Protocols Supported.......................................................1 
Physical Dimensions...............................................................1 
Functional Features ................................................................2 
Hardware Features..................................................................2 
LED Status..................................................................................2 
Status .....................................................................................2 
Link 1 and Link 2..................................................................2 
Identify Button .........................................................................2 
Wiring Diagrams.......................................................................3 
Default IP ...................................................................................4 
Finding the IP Address Using NMU......................................4 
Web Configuration...................................................................5 
Home......................................................................................5 
Identify Button.....................................................................5 
Settings ......................................................................................6 
Direct ..........................................................................................6 
DMX Protocols......................................................................6 
Universes/Outputs .............................................................7 
Group Pixels .........................................................................7 
DMX Start Address...............................................................7 
Standalone.................................................................................7 
Show Options –Activate Standalone Show................. 8 
Creating a Standalone Show ........................................... 8 
Deleting a Standalone..................................................... 10 
Copying a Standalone Show...........................................11 
Importing and Exporting a Standalone List................11 
Network Stats..........................................................................11 
Art-Net and ESP .................................................................11 
sACN......................................................................................11 
KiNET.....................................................................................12 
Update Firmware....................................................................12 
Reset to Factory Defaults.....................................................12 
Using Web Interface..........................................................12 
Using Button.......................................................................13 
Tips and Guidelines...............................................................13 
Ordering Information............................................................14 
Specifications..........................................................................14 
 

Pixel Octo User Manual

For latest version visit:

www.enttec.com

10 December 2019 M-files ID: 4836041 Page|1

Package Contents

•Pixel Octo (71520)

•Read me card

Safety Information

•This unit is intended for indoor use only.

•Do not expose this device to rain or moisture,

doing this will void the warranty.

•Make all connections before powering on

•Do not remove the cover, there are no user

serviceable components inside.

•Never plug this unit into a dimmer pack

•Ensure input voltage is within the specified

limits

•Ensure this device functions within the

recommended operating temperature

LED Protocols Supported

For supported protocols, please refer to support

page: www.enttec.com/support/supported-led

pixel-protocols/

Physical Dimensions

Pixel Octo User Manual

For latest version visit:

www.enttec.com

10 December 2019 M-files ID: 4836041 Page|2

Functional Features

•Supports the following protocols:

oArt-Net

oStreaming ACN (sACN)

oESP

oKiNET

•Configurable Static or Dynamic (DHCP) IP (DHCP

by default).

•Web configurable

•Firmware updateable

•Netmask and gateway updateable

•Up to 8 ethernet universes support (maximum

of 4 universes per output port)

•Controls a maximum of 680 RGB or 512 RGBW

pixel LEDs (per output).

•Configurable pixel colour ordering

•Monitors device temperature

•Monitors and displays the network traffic

•Easily extendable network – daisy chain

ethernet connection up to maximum of 50

•Compatible with CLK LED Tapes

•White Pixel Order support

•35mm DIN mountable

•Flexible wiring configurations

•User-friendly interface to create and execute

live effects on the fly

•Save created effects into a list of standalone

shows

•Maximum output refresh rate is 46 frame per

second

Hardware Features

•Aluminium Enclosure

•Top view indicator lights and button

•Pluggable terminal blocks

•Dual Spring 35mm DIN rail brackets

LED Status

Status

•This LED indicates the Pixel Octo status and

should be constantly flashing.

•The current operating status of the LED is

indicated as follows:

Link 1 and Link 2

•These two LEDs indicate network status for

each RJ45 port

Identify Button

The identify button serves 2 purposes:

•Identify the corresponding pixels connected to

a specific Octo

•Reset Pixel Octo (Refer Reset Pixel Octo)

When identify button is pressed, all DMX channels

of the pixels connected at the output will be driven

to the maximum value for ten seconds.

LED Colour

Unit Status

Red

Device in boot

White (static)

Idle

Purple (static)

IP Conflict

Green over white

Direct mode data receiving

Black over white

Standalone mode

Red over green

Multiple merge sources

Pixel Octo User Manual

For latest version visit:

www.enttec.com

10 December 2019 M-files ID: 4836041 Page|3

Wiring Diagrams

Connecting distance between Pixel Octo data output and tape/dots data input is highly dependent on cable quality,

maximum suggested length is no more than 3 meters.

Pixel Octo User Manual

For latest version visit:

www.enttec.com

10 December 2019 M-files ID: 4836041 Page|4

Default IP

Right out of the box, the Pixel Octo is factory

configured to be a DHCP node, so you can plug it

into your existing router, and it is good to go.

If the router is unable or slow to assign an IP

address to the driver the default static IP Address

is used.

The IP address can easily be calculated, using the

MAC address as follows:

10.(byte1).(byte2).(byte3)

Note

Where byte1, byte2 and byte3 are the last three bytes of

the mac address in decimal.

For e.g.:

•If mac address is 0050C2FFFF55 where last three

bytes are FF, FF and 55 default static IP for the

above mac is 10.255.255.85

•Where byte1 FF is 255 in decimal

•Where byte2 FF is 255 in decimal

•Where byte3 55 is 85 in decimal

The built-in web-interface of the Pixel Octo can be

accessed using the IP address via any modern web-

browser. The web-interface allows the settings of

the unit to be changed.

Finding the IP Address Using NMU

ENTTEC provides a free App (available for Windows

and Mac) called NMU (Node Management Utility)

that finds the Pixel Octo and display its IP address.

Note:

Pixel Octo is only supported by NMU V1.92 and above.

Please follow these steps:

1. Download NMU from www.enttec.com

2. Pixel Octo should be connected physically by

an Ethernet cable to the same physical network

or router as the computer that is running NMU.

3. Open NMU. If prompted with multiple network

interfaces, select the correct one to which the

Pixel Octo is connected to

4. Press the Discovery button, and wait till NMU

finds all supported ENTTEC devices

5. Once found, select Pixel Octo and use the IP

address to access the web-interface

Pixel Octo User Manual

For latest version visit:

www.enttec.com

10 December 2019 M-files ID: 4836041 Page|5

Web Configuration

The Pixel Octo can be configured and controlled

through a web browser, running on a computer

system, located on the same Local Area Network.

Note:

Google Chrome is recommended for accessing the Octo

web interface

Either click on the underlined URL displayed in

NMU or type the IP address (as detected by NMU

e.g.: 10.255.255.85) into your web browser to access

the web interface.

The top menu allows all the Pixel Octo web pages

to be accessed.

Menu option is highlighted blue to indicate which

page the user is on.

The web interface shows the word Direct or

Standalone depending on the mode the device is

in, as shown in the images below

Home

The Home tab displays the following information:

•DHCP status – whether enabled

•IP address

•NetMask

•Gateway

•Mac Address

•Link Speed

•Device Name

•Firmware version on device

•Serial number of the device

•Internal temperature of the processor

•System uptime

•Input protocol set on device

•Output LED protocol set on device

Identify Button

The identify button helps find the corresponding

pixels connected to a specific Octo.

When identify button is pressed, all DMX channels

of the pixels connected at the output will be driven

to the maximum value for ten seconds. For

example: an RGB tape will have all its channels go

to full resulting in a white colour for ten seconds.

Once pressed, a 10 second timer is displayed

Note:

Timer will not restart when pressed consecutively

Pixel Octo User Manual

For latest version visit:

www.enttec.com

10 December 2019 M-files ID: 4836041 Page|6

Settings

The Settings page allows a user to do the following:

•Change a device name for identification

•Enable/disable DHCP

•Specify static network settings

•Set the output LED Protocol

•Set the number of mapped pixels

•Configure how colours are mapped to pixels

•Reset to factory defaults

•Reboot device

Direct

Direct can be activated by clicking on the Use

Direct mode button in the Direct page as shown in

the image below

When activated, the word Direct will be displayed

next to the ENTTEC logo as shown in the image.

DMX Protocols

KiNET

Supported commands:

•Discover device

•Discover ports on device

•Change device name

•Change device IP

•Portout commands

•DMX out commands

•KGet Command

oKGet Subnet Mask

oKGet Gateway

oKGet port universe (port 1 and 2)

•KSet commands

oKSet Subnet Mask

oKSet Gateway

oKSet port universe (port 1 and 2)

oKSet device to boot

Art-NET

Supports Art-NET 1/2/3. Each output can be

assigned a start universe in the range 0 to 32764

(when universe/output = 4).

sACN

Outputs can be assigned a start universe in the

range 1-63996 (when universe/output = 4). 1

multicast universe is supported for sACN sync.

ESP

Outputs can be assigned a start universe in the

range 0-252 (when universe/output = 4). More

details of the ESP protocol can be found at

www.enttec.com

Pixel Octo User Manual

For latest version visit:

www.enttec.com

10 December 2019 M-files ID: 4836041 Page|7

Universes/Outputs

The Pixel Octo converts up to four universes of DMX

over Ethernet to pixel data per output.

Both outputs can be specified to use the same

universes, e.g. both outputs use universe 1,2,3 and

Each output can also be specified to use its own

individual group of universes, e.g. output 1 uses

universes 100,101,102 and 103 however output 2

uses 1,2,3 and 4.

Only the first universe can be specified; the

remaining universes, second, third and fourth are

automatically assigned subsequent universes to

the first one.

Example 1:

If the first universe is assigned 25, the second, third

and fourth universes will be automatically

assigned 26, 27 and 28 as shown in the image below.

Group Pixels

Controls the number of pixels controlled by each

DMX channel.

Example:

When group pixel is set to 10, each DMX channel of

the universe will control 10 pixels. The maximum

pixels lit is determined by mapped pixels; this

parameter can take a maximum of 680 (RGB) or 512

(RGBW).

DMX Start Address

Selects DMX channel number, which controls the

first pixel. When the universes/output is more than

one, the DMX start address only applies to the first

universes. However, where it applies, a start

address offset may result in the split of a pixel. E.g

R channel in first universe and GB channels in the

seconds universe for a RGB LED.

For ease of pixel mapping we recommend

offsetting the DMX start address as follows:

•Increments of 3 for RGB (1,4,7, 10)

•Increments of 4 for RGBW (1,5,9,13)

•Increments of 6 for RGB-16 bit (1,7,13,19)

•Increments of 8 for RGBW-16 bits (1,9,17,25)

Standalone

Standalone can be activated by clicking on the Use

Standalone mode button as shown below

When activated, the word Standalone will be

displayed next to the ENTTEC logo. When operating

in this mode note the following:

•16Bit protocols are not supported

•RGBW tapes are supported but white cannot be

controlled.

Pixel Octo User Manual

For latest version visit:

www.enttec.com

10 December 2019 M-files ID: 4836041 Page|8

Show Options –Activate Standalone Show

Octo allows the control of the standalone show

played at each of the two outputs. This is

controlled by the Show Options section. Both can

be set to output no standalone show:

The outputs can play the same standalone show

concurrently:

Or each can be set to output a different show:

Creating a Standalone Show

A standalone show can only be created when

Standalone mode is activated. Please follow these

steps to create a standalone (effect):

1. Select the next available standalone slot and

click on Create button

2. Select an output to preview the standalone

show on by using the check boxes

3. If the effect previewed is to be preserved, Type

in a name and click on Save Effect button

Preview Standalone

Pixel Octo allows the preview of the standalone.

Select the output to preview the standalone as

shown in the previous image.

If two different colour orders e.g.: RGB on output 1

and WWA in output 2 are assigned you can only

preview the effect on one output at a time. If you

attempt to preview both outputs the following

message is displayed

Standalone Show Name

Up to 65 characters can be used for a standalone

show name. All characters are supported except

comma (,). Octo does not allow a standalone to be

saved with an existing name on the list

Standalone Layers Explained

When creating a standalone the light output

should be visualized as two layers:

•Background (controls shown in red)

•Foreground (controls shown in blue)

Pixel Octo also has colour wheel support for WWA

(warm white, cool white and Amber) pixel tape

Pixel Octo User Manual

For latest version visit:

www.enttec.com

10 December 2019 M-files ID: 4836041 Page|9

Background

By only enabling the background layer the Pixel

tape/dots will respond like a standard RGB tape.

The background can be:

•Set to a constant colour

•Dimmed

•Made to strobe

The controllers affect the entire length up to the

maximum possible pixels (e.g. 680 3-channel pixels)

Foreground

This layer creates effects that overlay on the

background colour. The foreground can be:

•Set to a constant colour

•Dimmed

•Made to strobe

•Set to create patterns

Master Intensity

Controls the overall brightness of the output (both

for foreground and background). Where:

•0 – no LEDs are switched on

•255 – LEDs on are at full brightness

Background/Foreground Strobe Frequency

Controls the time between LED(s) on and off time.

•0 – LEDs switch on and off at slowest speed

•255 – LEDs switch on and off at fastest speed

Background/Foreground Strobe Duration

Controls the time that the LEDs are on

DMX fader value

On time

Always on

Smallest duration

255

Longest duration

Wave function

The foreground layer can be controlled to form

patterns of the following wave functions:

•Sine wave

•Log wave

•Square wave

•Sawtooth wave

•Rainbow Sine Wave

•Rainbow Log Wave

•Rainbow Square Wave

•Rainbow Sawtooth

Wave Direction

The wave pattern can be set to travel. Wave

direction setting determines which way the pattern

will travel. The wave can be set to move:

•Forward

•Backward

•Mirror out – pattern travelling out of centre

•Mirror in – pattern travelling into centre

This manual suits for next models

Table of contents

Other Enttec Controllers manuals

Enttec

Enttec DATAGATE MK2 Instruction manual

Enttec

Enttec Pixelator User manual

Enttec

Enttec OCTO MK2 User manual

Enttec

Enttec OCTO User manual

Enttec

Enttec PIXELATOR MINI Instruction manual

Enttec

Enttec Open DMX Ethernet User manual

Enttec

Enttec Pixel Triton User manual

Enttec

Enttec S-PLAY MINI User manual

Enttec

Enttec PIXELATOR MINI User guide

Enttec

Enttec Playback User manual

Enttec

Enttec 70314 User manual

Enttec

Enttec Din Pixie User manual

Enttec

Enttec DIN-ODE MK2 User manual

Enttec

Enttec DMXPLAYBACK MK2 User manual

Enttec

Enttec Evo User manual

Enttec

Enttec PIXEL PORT User manual

Enttec

Enttec Pixelator 70060 User manual

Enttec

Enttec PIXELATOR MINI User manual

Enttec

Enttec DMXEtherGate Mk2 User manual

Enttec

Enttec PIXELATOR MINI User manual

Enttec

Enttec S-PLAY User manual

Enttec

Enttec OCTO MK2 User manual

Enttec

Enttec ODE MK3 User manual

Enttec

Enttec S-PLAY NANO User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual