Eneo TVD-2080Z03IR User manual

User Manual

1/2.8” HD-TVI Dome, Fixed,

Day&Night, 1920x1080, 3x AF

Zoom, Infrared, 3D-DNR, 12/24V

TVD-2080Z03IR

Safety Precaution

FULL-HD AF-ZOOM CAMERA

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To prevent electric shocks and risk of fire hazards, do NOT use other than

specific power source.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Mains power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power mains interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

The symbol is intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

Safety Precaution

FULL-HD AF ZOOM CAMERA

NOTICE

The image used in this instruction manual are processed to help comprehension

and may differ from actual video of the camera.

Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable

is not subjected to heavy loads, kinks or damage and no moisture can get in.

Never open the device such as boards or lens.

The warranty becomes void if repairs are undertaken by unauthorized persons.

Maintenance and repair have to be carried out only by authorized service centers.

Use only a mild detergent to clean the housing.

The camera should never be operated beyond the technical specifications.

This can lead to destruction.

The camera should never be operated in water.

Contents

FULL-HD AF ZOOM CAMERA

Safety Precaution

p.03~04

Contents

p.05

Features

p.06~07

Composition

p.07

Dimensions

p.08

Part Names

p.09

Installation Instructions

p.10~13

Operating Instructions

p.14~29

Specifications

p.30

Features

Key Features

FULL-HD AF ZOOM CAMERA

• Full HD, 2Mega Pixel HD-TVI CAMERA, 1920x1080(30p/25p)

• TVI Video Transmission Distance over Coax.; 500M (RG59, 75Ω)

• Automatically removable IR Cut filter by Dual filter switcher

• Built-in f=3~9mm, F1.2~F2.1 Day & Night zoom lens

(Optical 3x Auto focus zoom / Digital 32x zoom)

• Focusing Status Indicator on Screen

- ★(Blue) Focusing in process

- ★(White) Focusing Completed

• True WDR(Wide Dynamic Range)

• Improved Noise figure with the enhanced 3D-NR

• Pointing Zoom which enables the flexible zooming at any area.

• Smart Motion Zoom in combining with Pointing Zoom.

• Preset Zoom

• Home Position setting

• Motion Detection, Privacy Mask, Defog, Sens-up(x32), BLC/HLC,

H/V/HV Flip, LSC(Lens Shade Compensation), Motion Deblur,

Pixel Defect Compensation, Lens Refresh, Lens Initializing Set

• ID / TITLE / ZOOM RATIO DISPLAY

• Enhanced Sensitivity by DSS technology

• Top performance at low light sensitivity (Sens-up On)

• OSD menu & Video sub-out for easy installation & maintenance.

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• Remote control via RS-485 (Pelco-D/P)

• UTC Control through HD-TVI DVR

• Built-in 2pcs High-power LED

• Double side Anti-Scratch Hard coated clear bubble

• Flush mount (option: Surface mount and various adaptors)

• Built-in 3-Axis Gimbal

• IP67 / IK10 Protection

• AC24/DC12V Dual power

General Description

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accepts the infrared light

• With 24VAC/12VDC dual power design,

- Offers the flexibility of installation

- Ensures the reliability

This camera realizes the natural and crisp image as you see the scene in front

of you by adopting Auto Focus Full HD(1920x1080p) camera module.

Highly detailed pictures can be achieved and color reproducibility deserves

attention.

Features

FULL-HD AF ZOOM CAMERA

Composition

Mounting Template

Cable Signal

Sticker

Operating

Instruction

Torque Wrench:

3mm (1pc)

Video Sub-out

Cable (1pc)

Mounting Screw:

4 x 30mm (3pcs)

Plastic Anchor:

6 x 30mm (3pcs)

Dome Camera

Wiring Connector

(1pc)

Connector fixing Screw:

2.5 x 5mm (1pc)

Dimensions

FULL-HD AF ZOOM CAMERA

Ø140

119

PCD Ø120

Ø102

Ø140

3-Ø4.2

(unit : mm)

Part Names

FULL-HD AF ZOOM CAMERA

BUBBLE DOME

3-AXIS GIMBAL

DOME COVER

SAFTY WIRE

FLUSH MOUNT

ZOOM LENS

OSD CONTROL

JOY STICK

POWER CABLE

VIDEO (BNC)

POWER CABLE

[ BOTTOM VIEW ]

POWER SUPPLY

CONNECTOR

POWER

CABLE

Installation Instructions

FULL-HD AF ZOOM CAMERA

1. Locate the mounting template at the installation position and drill the ceiling

or wall if needed.

2. Open the dome cover by loosening screws(4x12mm). Use the torque wrench

supplied.

3. Set the camera’s viewing angle.

4. Put the dome cover to the dome base unit and tighten the assembly screws.

- Place the dome base unit on pre-drilled position and fix it through using mounting

screws (4x30mm).

- Route the Power cable to the connecting place.

• Surface mount

• Pole mount adaptor

• Tilted mount

• Wall mount

(Requires additional

Surface mount)

• Tilted junction mount

■ Optional Mounting Accessories

Mounting Screw

(4x30mm)

Plastic Anchor

(6x30mm)

Torque

Wrench

Table of contents

Other Eneo Security Camera manuals

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications