Enclume LR2tr Instruction manual

LR2tr

Retro Fit Tools Kit for LR2 Sling Rack

Enclosed you will find everything needed for the assembly

Of your firewood rack. Two people make assembly easier

The parts and hardware included are:

1 Tool holder 1 – Shovel

1 Poker 2 – 3/8” x 3/4” Button head screws

1 Broom 1 – 7/32” Allen wrench

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Limited Warranty:This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall be

the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the warranty

period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid within 20 days

following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the customer by

Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA. 98339

Phone 360-385-6100 Fax 360-385-6156

www.enclume.com

Your LR2 Sling rack is one of the finest wood storage racks made.

Enclume’s unique surface treatment gives our solid steel firewood

racks a rich patina and hammered appearance unequaled in depth

and texture. The rack surfaces have been finished to resist

corrosion and let the natural beauty of the gray carbon steel shine

through. If your rack is used outdoors, rust or corrosion may occur.

To prevent this, we recommend indoor use.

WARNING:

READ ALL OF THE INSTRUCTIONS

BEFORE MODIFYIING AND USING

THE RACK

Assembly and Installation Instructions

to modify your LR2 rack to become an LR2tr

Enclosed you will find everything needed for the assembly

of your tool retrofit kit. The parts and hardware included are:

1 Tool holder 1 Shovel

1 Poker 2 – 3/8” x 3/4” Button head screws Tool Holder

1 Broom 1 – 7/32” Allen wrench Button head screws

ASSEMBLY INSTRUCTIONS

1) Using the Allen wrench, remove the button head screw from one side of each upright to detach the

kindling holder. Discard the screws. Loosen but do not remove the screws on the opposite side.

2) Attach the tool holder to the outside of the rectangular piece by inserting the ¾” screw from the outside,

through the tool holder, the upright and into the kindling holder. Repeat on the other side. Tighten the

screws only finger tight.

3) Square up the rack and tighten all screws.

4) Hang the tools on the tool holder hooks.

5) Use the kindling holder for kindling only. DO NOT stack logs in the kindling holder.

6) To clean your rack, use a damp cloth and dry it thoroughly. If a touch-up is ever necessary, remove any

dirt or rust with steel wool and re-coat with a “Pledge” like wax product.

It is important that your rack is assembled correctly. If the unit is assembled or used

incorrectly, it could become unstable and collapse, possibly causing injury.

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA. 98339

Phone 360-385-6100 Fax 360-385-6156

www.enclume.com

WARNING

This manual suits for next models

Table of contents

Other Enclume Rack & Stand manuals

Enclume

Enclume Decor DR20A Series Instruction manual

Enclume

Enclume LR34 User manual

Enclume

Enclume PR35 Instruction manual

Enclume

Enclume HDR3 Instruction manual

Enclume

Enclume LR36 User manual

Enclume

Enclume PR12 Instruction manual

Enclume

Enclume LR7 Instruction manual

Enclume

Enclume Classic Decor DR1 KD Series User manual

Enclume

Enclume PR37 Instruction manual

Enclume

Enclume Decor DR23 User manual

Enclume

Enclume LR11T User manual

Enclume

Enclume CWS8kd User manual

Enclume

Enclume PR41 User manual

Enclume

Enclume Classic Rectangle User manual

Enclume

Enclume PR41 User manual

Enclume

Enclume DUTCH CROWN RACK PR2 Instruction manual

Enclume

Enclume LR35 User manual

Enclume

Enclume PR34 User manual

Enclume

Enclume DR17a Instruction manual

Enclume

Enclume LR16 User manual

Enclume

Enclume DR1 KD User manual

Enclume

Enclume LR32 User manual

Enclume

Enclume S RACK PR17 User manual

Enclume

Enclume PR15 User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 