Enclume DR1 KD User manual

V er05.05.03

Enclume Classic Décor Oval Rack

DR1 KD

Enclume Décor racks are the ultimate in

quality, design, strength and function.

Congratulations for owning one of the finest

storage racks made.

WARNING:

READ ALL OF THE INSTRUCTIONS

BEFORE ASSEMBLING AND USING YOUR RACK.

Enclosed you will find everything needed for the assembly and use of your pot rack. Two people make assembly and

installation easier. The parts and hardware included are

Components included:

1 - Hammered Steel Oval

1 - Cross Bar

4 - Curved Brackets

1 - Grid

Hardware included:

2 - Ceiling Screw Hooks

2 - Chain approx. 6"

2 - 'S' Hooks 2"

12 - Pot Hooks

4 - Grid Brackets - EGB

1 - 1/8" Hex Key

2 - #10 x 3/8" Button Head Screws

2 - #10 x 5/8" Button Head Screws

Toggle Kit

ASSEMBLY AND INSTALLATION INSTRUCTIONS

1) Lay rack body (oval) on firm surface. Protect surface with corrugated box if necessary.

2) Using two #10 x 3/8" button head screws, attach cross bar to both ends of the oval. (The cross bar will fit to the outside of

the rack body). Do not fully tighten screws at this time.

3) The curved brackets are pre-assembled as a set, each set will have one curved bracket with a "tapped" (threaded hole)

and one with a drilled (no threads). Remove the #10 x 5/8" button head from one set. Slipping each curved bracket (end

with the tight "U" shape bend) onto the rack body one on each side of the rack, using the #10 x 5/8 button head screw,

attach the two curved brackets and the cross bar together. (Please use the hole closest to the end of the cross bar, the

larger of the two holes must be used to hang fixture).

4) Repeat process for other set of curved brackets. Securely tighten all screws at this time.

5) Your rack can be carefully anchored into solid wood of the ceiling joist or beams. Carefully measure the area where the

rack is to be hung and install the ceiling screw hooks (approximately 14" apart). If you are mounting in plasterboard, use

the Toggle provided and follow the directions in the Toggle kit.

6) Place the four grid brackets over the sides of the rack on the inside of each of the four curved brackets with the straight

end of the brackets facing towards the inside of the rack. Next place the grid on top of the grid brackets. (See note next

page).

V er05.05.03

7) Insert the "S" hooks into each of the remaining holes in the cross bar and the other end through one end of the chain.

Carefully lift your rack into place and attach the other end of the chain onto the ceiling screw hooks.

8) Hang your heavier item on the straight portion of the rack body or the center of the grid area.

9) All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack.

Cleaning is done easily with a damp cloth. Dry thoroughly after cleaning. If a touch up is ever needed we recommend a

"Pledge" like wax product.

Note: Grid as shown in drawings is upside down for illustration purposes. Please turn grid over so crossbars that extend the

width of the grid are facing down. This will help to keep grid from sliding out of position when rack is in use.

It is important that your rack is assembled correctly. If the unit is assembled or

used incorrectly, it could become unstable and collapse, possibly causing injury.

If you need help, please call 1-877-ENCLUME

Enclume Design Products, Inc.

24 Colwell Street, Port Hadlock, WA. 98339

Phone 360-385-6100 Fax 360-385-6156

www.enclume.com

WARNING

Limited Warranty: Thisprodu ctis warranted tobe free ofmaterialdefectsforaperiod offive yearsfrom the date ofpu rchase.C u stomer'sexclu sive remed yshall

be the repairorreplacementofthe defective produ ctand shallbe su bjecttothe followingconditions:(1)notice ofanydefectisreceived byEnclu me withinthe

warrantyperiod and (2)cu stomerretu rnsthe d efective produ cttoEnclu me D esignP rodu cts,Inc.,24 C olwellSt..,P ortH ad lock,W A 98 339,postage prepaid

within20 daysfollowingaretu rnau thorizationnu mber(whichmaybe obtained bytelephoningthe nu mberatthe bottom ofthis instru ctions)beingprovided tothe

cu stomerbyEnclu me.There are nootherwarranties,expressed orimplied.THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.

Table of contents

Other Enclume Rack & Stand manuals

Enclume

Enclume Curved Sling Rack LR16 User manual

Enclume

Enclume HDR3 Instruction manual

Enclume

Enclume PR41 User manual

Enclume

Enclume DR29 User manual

Enclume

Enclume PR35 Instruction manual

Enclume

Enclume LR11T User manual

Enclume

Enclume Classic Rectangle User manual

Enclume

Enclume PR8a User manual

Enclume

Enclume QR1 Instruction manual

Enclume

Enclume PR13 User manual

Enclume

Enclume LR32 User manual

Enclume

Enclume PR12 Instruction manual

Enclume

Enclume PR33 Instruction manual

Enclume

Enclume DR 25 User manual

Enclume

Enclume DR17a Instruction manual

Enclume

Enclume Classic Decor DR1 KD Series User manual

Enclume

Enclume DR20 Instruction manual

Enclume

Enclume PR41 User manual

Enclume

Enclume Decor DR20A Series Instruction manual

Enclume

Enclume LR35 User manual

Enclume

Enclume LR34 User manual

Enclume

Enclume LR12A Instruction manual

Enclume

Enclume LR36 User manual

Enclume

Enclume PR38 Instruction manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 